To verify the SPA
type installed on the Cisco uBR10012 router, use the following commands:
Note |
With Cisco IOS
commands, the
Cisco 6 Gbps Wideband Shared Port Adapter Gigabit
Ethernet ports are not standard user-configurable interfaces and do not appear
in the output of the
show interfaces
command.
Use the
show controllers
modular-cable command with the
ge_phy keyword
to get information on the
Cisco 6 Gbps Wideband Shared Port Adapter Gigabit
Ethernet ports.
|
SPA
|
Description in show diag command
|
Cisco 6 Gbps Wideband Shared Port Adapter
|
SPA-DOCSIS-HD-V1
|
The 192 wideband
channels on each
Cisco 6 Gbps Wideband Shared Port Adapter are similar to
the cable interfaces and appear in the output of the
show interfaces
command.
The
show hw-module
bay command displays information about the RF channels and
wideband channels on a
Cisco 6 Gbps Wideband Shared Port Adapter.
The
show interface
wideband-cable command displays information about the cable
interfaces for the wideband channels
Examples of the
show diag Command
The following
example shows output from the
show diag
command on a Cisco uBR10012 router, running Cisco IOS Release 12.2(33)SCI, with
a
Cisco 6 Gbps Wideband Shared Port Adapter installed in
slot 1, subslot 2.
Router# show diag 1/0
Slot 1:
4jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 01:23:57 ago
Card uptime 0 days, 1 hours, 23 minutes, 55 seconds
Card idle time 0 days, 1 hours, 17 minutes, 48 seconds
Voltage status:
EEPROM contents, slot 1/0:
Controller Type : 1380
Hardware Revision : 1.0
PCB Part Number : 73-10771-03
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : CAT1602F0FR
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-27953-04
CLEI Code : IPUIA7TRAB
Product Identifier (PID) : 10000-SIP-600
Version Identifier (VID) : V02
LCMON version, slot 1/0
LCDOS (LATEST-BOOT : DEVELOPMENT BUILD xxxxxx-mayflower_lc_0628 /vob/lcdos/obj-c10k-pq3-lcmon 114)
Built by xxxxxx at Mon Jul 16 14:00:18 2007.
Reset reason 0x00000008 (PRE hard reset).
Operational Image version, slot 1/0
LCDOS (C10000 4 SPA Jacket Card Image (Spumoni) : DEVELOPMENT BUILD BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle-V122_32_8_24_SCI-v122_33_sci_throttle-20140810_2207-21 /view/BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle
Built by xxxxxx at Sun Aug 10 22:28:10 2014.
SW Version 1.1
Code MD5 88F543721CF42BB65A34A5D0AC6D605E
FPGA MD5 89C8DD3DCD939BDD43DB19D514416137
Expected Switchover Action: NO INFORMATION
ECC 1 bit errors since last cleared (dd hh mm ss) = 0 (0 days, 0 hours, 0 minutes, 0 seconds)
ECC 1 bit errors while up (total) = 0
Number of crashdumps recorded = 1
SPA Information:
bay 1/2 SPA-UBR10-DS-HD ok
SW Version 1.0
Expected Switchover Action: NO INFORMATION
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
PCB Serial Number : CAT1635E0TW
Top Assy. Revision : 02
Hardware Revision : 1.1
CLEI Code :
The Transceiver in slot 1 subslot 2 port 0 is ENABLED.
No Transceiver in slot 1 subslot 2 port 1 .
No Transceiver in slot 1 subslot 2 port 2 .
Wideband Information:
slot/bay 1/2:
SPA-DOCSIS-HD-V1 card, 1 port + 1 redundant port
Card is half slot size
Card is analyzed
Card detected 01:23:29 ago
Card uptime: Not Supported
Card idle time: Not Supported
Voltage status:
VP12V_SPA_MON (+11.856)v VP3P6_MON (+3.591)v
VP2P5_MON (+2.496)v VP1P25_MON (+1.254)v
SPA_AUX_MON (+3.272)v ADM1166_2_OK (+2.048)v
PWR_EN (+2.048)v VP1P0_MON (+1.012)v
VCCINT_MON (+0.997)v ADM1166_2_DOWN (+2.048)v
VP12V_SPA_MON (+11.846)v VP3P3_MON (+3.296)v
VP1P8_MON (+1.799)v VP1P5_MON (+1.492)v
MGTAVTT_MON (+1.193)v MGTAVCC_MON (+0.996)v
VTT_MON (+0.734)v PLL_STATUS (+0.006)v
PLL_LD (+2.048)v ADM1166_2_EN (+2.048)v
License : 48
EEPROM contents, slot/bay 1/2:
Controller Type : 2938
Hardware Revision : 1.1
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0TW
PCB Part Number : 73-15030-01
PCB Revision : 06
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 2E E0 46 32 09 C4
46 32 0C E4 46 32 03 E8
46 1E 03 E8 46 1E 2E E0
46 32 0C E4 46 32 07 08
46 32 05 DC 46 32 04 B0
46 19 03 E8 46 1E 02 EE
46 32 FE 02 EF 64
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63B
Asset Alias :
WBCMTS HD SPA capacity : 6G
DAUGHTER contents:
Controller Type : 2939
Hardware Revision : 1.0
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0YZ
PCB Part Number : 73-15093-01
PCB Revision : 04
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 0C E4 46 32 09 C4
46 32 00 00 00 00 04 B0
46 32 00 00 00 00 07 08
46 32 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 FE 02 FA 6D
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63
Asset Alias :
The following example shows output from the
show diag command on a Cisco uBR10012 router,
running Cisco IOS Release 12.2(33)SCI1, with a
Cisco 6 Gbps Wideband Shared Port Adapter
installed in slot 1, subslot 2.
Router# show diag 1/0
Slot 1:
4jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 01:23:57 ago
Card uptime 0 days, 1 hours, 23 minutes, 55 seconds
Card idle time 0 days, 1 hours, 17 minutes, 48 seconds
Voltage status:
EEPROM contents, slot 1/0:
Controller Type : 1380
Hardware Revision : 1.0
PCB Part Number : 73-10771-03
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : CAT1602F0FR
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-27953-04
CLEI Code : IPUIA7TRAB
Product Identifier (PID) : 10000-SIP-600
Version Identifier (VID) : V02
LCMON version, slot 1/0
LCDOS (LATEST-BOOT : DEVELOPMENT BUILD xxxxxx-mayflower_lc_0628 /vob/lcdos/obj-c10k-pq3-lcmon 114)
Built by xxxxxx at Mon Jul 16 14:00:18 2007.
Reset reason 0x00000008 (PRE hard reset).
Operational Image version, slot 1/0
LCDOS (C10000 4 SPA Jacket Card Image (Spumoni) : DEVELOPMENT BUILD BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle-V122_32_8_24_SCI-v122_33_sci_throttle-20140810_2207-21 /view/BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle
Built by xxxxxx at Sun Aug 10 22:28:10 2014.
SW Version 1.1
Code MD5 88F543721CF42BB65A34A5D0AC6D605E
FPGA MD5 89C8DD3DCD939BDD43DB19D514416137
Expected Switchover Action: NO INFORMATION
ECC 1 bit errors since last cleared (dd hh mm ss) = 0 (0 days, 0 hours, 0 minutes, 0 seconds)
ECC 1 bit errors while up (total) = 0
Number of crashdumps recorded = 1
SPA Information:
bay 1/2 SPA-UBR10-DS-6G ok
SW Version 1.0
Expected Switchover Action: NO INFORMATION
Product Identifier (PID) : SPA-UBR10-DS-6G
Version Identifier (VID) : V01
PCB Serial Number : CAT1635E0TW
Top Assy. Revision : 02
Hardware Revision : 1.1
CLEI Code :
The Transceiver in slot 1 subslot 2 port 0 is ENABLED.
No Transceiver in slot 1 subslot 2 port 1 .
No Transceiver in slot 1 subslot 2 port 2 .
Wideband Information:
slot/bay 1/2:
SPA-DOCSIS-HD-V1 card, 1 port + 1 redundant port
Card is half slot size
Card is analyzed
Card detected 01:23:29 ago
Card uptime: Not Supported
Card idle time: Not Supported
Voltage status:
VP12V_SPA_MON (+11.856)v VP3P6_MON (+3.591)v
VP2P5_MON (+2.496)v VP1P25_MON (+1.254)v
SPA_AUX_MON (+3.272)v ADM1166_2_OK (+2.048)v
PWR_EN (+2.048)v VP1P0_MON (+1.012)v
VCCINT_MON (+0.997)v ADM1166_2_DOWN (+2.048)v
VP12V_SPA_MON (+11.846)v VP3P3_MON (+3.296)v
VP1P8_MON (+1.799)v VP1P5_MON (+1.492)v
MGTAVTT_MON (+1.193)v MGTAVCC_MON (+0.996)v
VTT_MON (+0.734)v PLL_STATUS (+0.006)v
PLL_LD (+2.048)v ADM1166_2_EN (+2.048)v
License : 48
EEPROM contents, slot/bay 1/2:
Controller Type : 2938
Hardware Revision : 1.1
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0TW
PCB Part Number : 73-15030-01
PCB Revision : 06
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-6G
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 2E E0 46 32 09 C4
46 32 0C E4 46 32 03 E8
46 1E 03 E8 46 1E 2E E0
46 32 0C E4 46 32 07 08
46 32 05 DC 46 32 04 B0
46 19 03 E8 46 1E 02 EE
46 32 FE 02 EF 64
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63B
Asset Alias :
WBCMTS HD SPA capacity : 6G
DAUGHTER contents:
Controller Type : 2939
Hardware Revision : 1.0
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0YZ
PCB Part Number : 73-15093-01
PCB Revision : 04
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-6G
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 0C E4 46 32 09 C4
46 32 00 00 00 00 04 B0
46 32 00 00 00 00 07 08
46 32 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 FE 02 FA 6D
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63
Asset Alias :
The following
example shows the output from the show diag
command that displays the capacity information on a Cisco uBR10012 router with
a
Cisco 6 Gbps Wideband Shared Port Adapter installed in
slot 1, subslot 2 :
Router# show diag 1/0 | include capacity
WBCMTS HD SPA capacity : 6G
Examples of the
show hw-module subslot fpd Command
The following
example shows the output from the
show hw-module subslot
fpd command that displays the FPGA version information for the
Cisco 6 Gbps Wideband Shared Port Adapter located in
slot 1, subslot 2:
Router# show hw-module subslot 1/2 fpd | include HD
1/2 SPA-UBR10-DS-HD 1.1 2-EASTLAKE FPGA 4096.56 4096.0
The following example shows the output from the
show hw-module subslot fpd command, for Cisco
IOS Release 12.2(33)SCI1, that displays the FPGA version information for the
Cisco 6 Gbps Wideband Shared Port Adapter
located in slot 1, subslot 2:
Router# show hw-module subslot 1/2 fpd | include HD
1/2 SPA-UBR10-DS-6G 1.1 2-EASTLAKE FPGA 4096.56 4096.56