To verify the SIP
hardware type that is installed in your Cisco uBR10012 router, you can use the
show diag
command. There are other commands on the Cisco uBR10012 router that also
provide SIP hardware information, such as the
show inventory
command.
Example of the
show diag Command
The following
example shows output from the show diag command on the Cisco uBR10012 router
with a Cisco Wideband SIP installed in slot 1/0. The output includes the SIP
hardware type and SIP serial number.
Note |
This example shows
the syntax supported prior to Cisco IOS Release 12.2(33)SCB.
|
Router# show diag 1/0
Slot/Subslot 1/0:
2jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 12:16:52 ago
Card uptime 0 days, 12 hours, 16 minutes, 53 seconds
Card idle time 0 days, 11 hours, 3 minutes, 46 seconds
Voltage status: 3.3V Nominal 2.5V Nominal 1.5V Nominal 12V Nominal
EEPROM contents, slot 1/0:
Hardware Revision : 1.0
Top Assy. Part Number : 800-22843-04
Board Revision : 01
Deviation Number : 0-0
Fab Version : 04
PCB Serial Number : CSJ09030613
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
CLEI Code :
LCMON version, slot 1/0
LCDOS (Ferrari-BOOT : DEVELOPMENT BUILD xxxxxx-flot_spa_lc_2
/vob/lcdos/obj-c10k-pq2-lcmon2 104)
Built by xxxxxx at Mon Apr 17 13:49:38 2006.
Reset reason 0x00000003/0x2 (PRE hard reset).
Operational Image version, slot 1/0
LCDOS (C10000 2 Bay SPA Jacket (JACKET2) Image : DEVELOPMENT BUILD xxxxxx
/vob/lcdos/obj-c10k-jacket 101) major version 1147325083.
Built by xxxxxx at Wed May 10 22:24:44 2006.
The following
example shows output from the
show diag
command on the Cisco uBR10012 router with a Cisco SIP-600 installed in slot 1/0
and having
Cisco 3 Gbps Wideband Shared
Port Adapter card in
slot/bay 1/0.
Router# show diag 1/0
Slot 1:
4jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 01:09:58 ago
Card uptime 0 days, 1 hours, 9 minutes, 57 seconds
Card idle time 0 days, 1 hours, 1 minutes, 53 seconds
Voltage status:
EEPROM contents, slot 1/0:
Controller Type : 1380
Hardware Revision : 1.0
PCB Part Number : 73-10771-02
Board Revision : D0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : CAT1438F01K
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-27953-03
CLEI Code : IPUIA7TRAA
Product Identifier (PID) : 10000-SIP-600
Version Identifier (VID) : V01
LCMON version, slot 1/0
LCDOS (LATEST-BOOT : DEVELOPMENT BUILD jkotelly-mayflower_lc_0628 /vob/l
cdos/obj-c10k-pq3-lcmon 114)
Built by xxxxxx at Mon Jul 16 14:00:18 2007.
Reset reason 0x00000008 (PRE hard reset).
Operational Image version, slot 1/0
LCDOS (C10000 4 SPA Jacket Card Image (Spumoni) : DEVELOPMENT BUILD dasz
hang-license_lc /vob/lcdos/obj-c10k-spumoni 102) major version 1357881885.
Built by xxxxxx at Thu Jan 10 21:26:42 2013.
SW Version 1.1
Code MD5 D266CF60F88DD7A0408C105F7BA8AB32
FPGA MD5 89C8DD3DCD939BDD43DB19D514416137
Expected Switchover Action: NO INFORMATION
ECC 1 bit errors since last cleared (dd hh mm ss) = 0 (0 days, 0 hours, 0 minutes,
0 seconds)
ECC 1 bit errors while up (total) = 0
Number of crashdumps recorded = 1
SPA Information:
bay 1/0 SPA-UBR10-DS-HD ok
SW Version 1.0
SW Version 1.0
Expected Switchover Action: NO INFORMATION
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
PCB Serial Number : CAT1635E0W6
Top Assy. Revision : 02
Hardware Revision : 1.1
CLEI Code :
The Transceiver in slot 1 subslot 0 port 0 is ENABLED.
No Transceiver in slot 1 subslot 0 port 1 .
The Transceiver in slot 1 subslot 0 port 2 is ENABLED.
Wideband Information:
slot/bay 1/0:
SPA-DOCSIS-HD-V1 card, 3 port + 0 redundant port
Card is half slot size
Card is analyzed
Card detected 01:09:57 ago
Card uptime: Not Supported
Card idle time: Not Supported
Voltage status:
VP12V_SPA_MON (+11.909)v VP3P6_MON (+3.595)v
VP2P5_MON (+2.502)v VP1P25_MON (+1.250)v
SPA_AUX_MON (+3.270)v ADM1166_2_OK (+2.048)v
PWR_EN (+2.048)v VP1P0_MON (+1.014)v
VCCINT_MON (+0.999)v ADM1166_2_DOWN (+2.048)v
VP12V_SPA_MON (+11.909)v VP3P3_MON (+3.303)v
VP1P8_MON (+1.802)v VP1P5_MON (+1.497)v
MGTAVTT_MON (+1.197)v MGTAVCC_MON (+0.997)v
VTT_MON (+0.735)v PLL_STATUS (+0.005)v
PLL_LD (+2.048)v ADM1166_2_EN (+2.048)v
License : 0
Licensing Transaction ID : 59040
Ordered PID : SWLIC-SPA-HD-DS-16115360
EEPROM contents, slot/bay 1/0:
Controller Type : 2938
Hardware Revision : 1.1
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0W6
PCB Part Number : 73-15030-01
PCB Revision : 06
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 2E E0 46 32 09 C4
46 32 0C E4 46 32 03 E8
46 1E 03 E8 46 1E 2E E0
46 32 0C E4 46 32 07 08
46 32 05 DC 46 32 04 B0
46 19 03 E8 46 1E 02 EE
46 32 FE 02 EF 64
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-62B
Asset Alias :
The following
example shows output from the
show diag
command on the Cisco uBR10012 router, running Cisco IOS Release 12.2(33)SCI,
with a Cisco SIP-600 installed in slot 1/0 and having
Cisco 6 Gbps Wideband Shared Port Adapter card in
slot/bay 1/2.
Router# show diag 1/0
Slot 1:
4jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 01:23:57 ago
Card uptime 0 days, 1 hours, 23 minutes, 55 seconds
Card idle time 0 days, 1 hours, 17 minutes, 48 seconds
Voltage status:
EEPROM contents, slot 1/0:
Controller Type : 1380
Hardware Revision : 1.0
PCB Part Number : 73-10771-03
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : CAT1602F0FR
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-27953-04
CLEI Code : IPUIA7TRAB
Product Identifier (PID) : 10000-SIP-600
Version Identifier (VID) : V02
LCMON version, slot 1/0
LCDOS (LATEST-BOOT : DEVELOPMENT BUILD jkotelly-mayflower_lc_0628 /vob/lcdos/obj-c10k-pq3-lcmon 114)
Built by xxxxxx at Mon Jul 16 14:00:18 2007.
Reset reason 0x00000008 (PRE hard reset).
Operational Image version, slot 1/0
LCDOS (C10000 4 SPA Jacket Card Image (Spumoni) : DEVELOPMENT BUILD BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle-V122_32_8_24_SCI-v122_33_sci_throttle-20140810_2207-21 /view/BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle
Built by xxxxxx at Sun Aug 10 22:28:10 2014.
SW Version 1.1
Code MD5 88F543721CF42BB65A34A5D0AC6D605E
FPGA MD5 89C8DD3DCD939BDD43DB19D514416137
Expected Switchover Action: NO INFORMATION
ECC 1 bit errors since last cleared (dd hh mm ss) = 0 (0 days, 0 hours, 0 minutes, 0 seconds)
ECC 1 bit errors while up (total) = 0
Number of crashdumps recorded = 1
SPA Information:
bay 1/2 SPA-UBR10-DS-HD ok
SW Version 1.0
Expected Switchover Action: NO INFORMATION
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
PCB Serial Number : CAT1635E0TW
Top Assy. Revision : 02
Hardware Revision : 1.1
CLEI Code :
The Transceiver in slot 1 subslot 2 port 0 is ENABLED.
No Transceiver in slot 1 subslot 2 port 1 .
No Transceiver in slot 1 subslot 2 port 2 .
Wideband Information:
slot/bay 1/2:
SPA-DOCSIS-HD-V1 card, 1 port + 1 redundant port
Card is half slot size
Card is analyzed
Card detected 01:23:29 ago
Card uptime: Not Supported
Card idle time: Not Supported
Voltage status:
VP12V_SPA_MON (+11.856)v VP3P6_MON (+3.591)v
VP2P5_MON (+2.496)v VP1P25_MON (+1.254)v
SPA_AUX_MON (+3.272)v ADM1166_2_OK (+2.048)v
PWR_EN (+2.048)v VP1P0_MON (+1.012)v
VCCINT_MON (+0.997)v ADM1166_2_DOWN (+2.048)v
VP12V_SPA_MON (+11.846)v VP3P3_MON (+3.296)v
VP1P8_MON (+1.799)v VP1P5_MON (+1.492)v
MGTAVTT_MON (+1.193)v MGTAVCC_MON (+0.996)v
VTT_MON (+0.734)v PLL_STATUS (+0.006)v
PLL_LD (+2.048)v ADM1166_2_EN (+2.048)v
License : 48
EEPROM contents, slot/bay 1/2:
Controller Type : 2938
Hardware Revision : 1.1
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0TW
PCB Part Number : 73-15030-01
PCB Revision : 06
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 2E E0 46 32 09 C4
46 32 0C E4 46 32 03 E8
46 1E 03 E8 46 1E 2E E0
46 32 0C E4 46 32 07 08
46 32 05 DC 46 32 04 B0
46 19 03 E8 46 1E 02 EE
46 32 FE 02 EF 64
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63B
Asset Alias :
WBCMTS HD SPA capacity : 6G
DAUGHTER contents:
Controller Type : 2939
Hardware Revision : 1.0
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0YZ
PCB Part Number : 73-15093-01
PCB Revision : 04
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-HD
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 0C E4 46 32 09 C4
46 32 00 00 00 00 04 B0
46 32 00 00 00 00 07 08
46 32 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 FE 02 FA 6D
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63
Asset Alias :
The following
example shows output from the
show diag
command on the Cisco uBR10012 router, running Cisco IOS Release 12.2(33)SCI1,
with a Cisco SIP-600 installed in slot 1/0 and having
Cisco 6 Gbps Wideband Shared Port Adapter card in
slot/bay 1/2.
Router# show diag 1/0
Slot 1:
4jacket-1 card, 0 ports
Card is full slot size
Card is analyzed
Card detected 01:23:57 ago
Card uptime 0 days, 1 hours, 23 minutes, 55 seconds
Card idle time 0 days, 1 hours, 17 minutes, 48 seconds
Voltage status:
EEPROM contents, slot 1/0:
Controller Type : 1380
Hardware Revision : 1.0
PCB Part Number : 73-10771-03
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : CAT1602F0FR
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Top Assy. Part Number : 800-27953-04
CLEI Code : IPUIA7TRAB
Product Identifier (PID) : 10000-SIP-600
Version Identifier (VID) : V02
LCMON version, slot 1/0
LCDOS (LATEST-BOOT : DEVELOPMENT BUILD jkotelly-mayflower_lc_0628 /vob/lcdos/obj-c10k-pq3-lcmon 114)
Built by xxxxxx at Mon Jul 16 14:00:18 2007.
Reset reason 0x00000008 (PRE hard reset).
Operational Image version, slot 1/0
LCDOS (C10000 4 SPA Jacket Card Image (Spumoni) : DEVELOPMENT BUILD BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle-V122_32_8_24_SCI-v122_33_sci_throttle-20140810_2207-21 /view/BLD-v122_33_sci_lc_throttle.lcdos-UNIQ-v122_33_sci_lc_throttle
Built by xxxxxx at Sun Aug 10 22:28:10 2014.
SW Version 1.1
Code MD5 88F543721CF42BB65A34A5D0AC6D605E
FPGA MD5 89C8DD3DCD939BDD43DB19D514416137
Expected Switchover Action: NO INFORMATION
ECC 1 bit errors since last cleared (dd hh mm ss) = 0 (0 days, 0 hours, 0 minutes, 0 seconds)
ECC 1 bit errors while up (total) = 0
Number of crashdumps recorded = 1
SPA Information:
bay 1/0 SPA-UBR10-DS-6G ok
SW Version 1.0
SW Version 1.0
Expected Switchover Action: NO INFORMATION
Product Identifier (PID) : SPA-UBR10-DS-6G
Version Identifier (VID) : V01
PCB Serial Number : CAT1635E0W6
Top Assy. Revision : 02
Hardware Revision : 1.1
CLEI Code :
The Transceiver in slot 1 subslot 2 port 0 is ENABLED.
No Transceiver in slot 1 subslot 2 port 1 .
No Transceiver in slot 1 subslot 2 port 2 .
Wideband Information:
slot/bay 1/2:
SPA-DOCSIS-HD-V1 card, 1 port + 1 redundant port
Card is half slot size
Card is analyzed
Card detected 01:23:29 ago
Card uptime: Not Supported
Card idle time: Not Supported
Voltage status:
VP12V_SPA_MON (+11.856)v VP3P6_MON (+3.591)v
VP2P5_MON (+2.496)v VP1P25_MON (+1.254)v
SPA_AUX_MON (+3.272)v ADM1166_2_OK (+2.048)v
PWR_EN (+2.048)v VP1P0_MON (+1.012)v
VCCINT_MON (+0.997)v ADM1166_2_DOWN (+2.048)v
VP12V_SPA_MON (+11.846)v VP3P3_MON (+3.296)v
VP1P8_MON (+1.799)v VP1P5_MON (+1.492)v
MGTAVTT_MON (+1.193)v MGTAVCC_MON (+0.996)v
VTT_MON (+0.734)v PLL_STATUS (+0.006)v
PLL_LD (+2.048)v ADM1166_2_EN (+2.048)v
License : 48
EEPROM contents, slot/bay 1/2:
Controller Type : 2938
Hardware Revision : 1.1
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0TW
PCB Part Number : 73-15030-01
PCB Revision : 06
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-6G
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 2E E0 46 32 09 C4
46 32 0C E4 46 32 03 E8
46 1E 03 E8 46 1E 2E E0
46 32 0C E4 46 32 07 08
46 32 05 DC 46 32 04 B0
46 19 03 E8 46 1E 02 EE
46 32 FE 02 EF 64
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63B
Asset Alias :
WBCMTS HD SPA capacity : 6G
DAUGHTER contents:
Controller Type : 2939
Hardware Revision : 1.0
Boot Timeout : 500 msecs
PCB Serial Number : CAT1635E0YZ
PCB Part Number : 73-15093-01
PCB Revision : 04
Fab Version : 01
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0
Product Identifier (PID) : SPA-UBR10-DS-6G
Version Identifier (VID) : V01
Top Assy. Part Number : 800-38945-01
Top Assy. Revision : 02
IDPROM Format Revision : 36
System Clock Frequency : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00
CLEI Code :
Base MAC Address : 00 00 00 00 00 00
MAC Address block size : 1
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Calibration Data : Minimum: 0 dBmV, Maximum: 0 dBmV
Calibration values :
Power Consumption : 300000 mWatts (Maximum)
Environment Monitor Data : 03 30 0C E4 46 32 09 C4
46 32 00 00 00 00 04 B0
46 32 00 00 00 00 07 08
46 32 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 FE 02 FA 6D
Processor Label : 00 00 00 00 00 00 00
Platform features : 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
Asset ID : P1B-63
Asset Alias :