Sample Output from the show ipv6 ospf interface Command
The following is sample output from the show ipv6 ospf interface command with regular interfaces and a virtual link that are protected by encryption and authentication:
Device# show ipv6 ospf interface
OSPFv3_VL1 is up, line protocol is up
Interface ID 69
Area 0, Process ID 1, Instance ID 0, Router ID 10.0.0.1
Network Type VIRTUAL_LINK, Cost: 64
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
NULL encryption SHA-1 auth SPI 3944, secure socket UP (errors: 0)
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 2, Dead 10, Wait 40, Retransmit 5
Hello due in 00:00:00
Index 1/3/5, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.2.0.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
OSPFv3_VL0 is up, line protocol is up
Interface ID 67
Area 0, Process ID 1, Instance ID 0, Router ID 10.0.0.1
Network Type VIRTUAL_LINK, Cost: 128
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
MD5 authentication SPI 940, secure socket UP (errors: 0)
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:09
Index 1/2/4, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 10
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.1.0.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
Ethernet1/0 is up, line protocol is up
Link Local Address FE80::A8BB:CCFF:FE00:6601, Interface ID 6
Area 0, Process ID 1, Instance ID 0, Router ID 10.0.0.1
Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 10.0.0.1, local address FE80::A8BB:CCFF:FE00:6601
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:09
Index 1/1/1, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Serial12/0 is up, line protocol is up
Link Local Address FE80::A8BB:CCFF:FE00:6600, Interface ID 50
Area 1, Process ID 1, Instance ID 0, Router ID 10.0.0.1
Network Type POINT_TO_POINT, Cost: 64
AES-CBC encryption SHA-1 auth SPI 2503, secure socket UP (errors: 0)
authentication NULL
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:09
Index 1/2/3, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 5
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.2.0.1
Suppress hello for 0 neighbor(s)
Serial11/0 is up, line protocol is up
Link Local Address FE80::A8BB:CCFF:FE00:6600, Interface ID 46
Area 1, Process ID 1, Instance ID 0, Router ID 10.0.0.1
Network Type POINT_TO_POINT, Cost: 64
MD5 authentication (Area) SPI 500, secure socket UP (errors: 0)
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:09
Index 1/1/2, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 5
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 10.0.0.1
Suppress hello for 0 neighbor(s)
Sample Output from the show crypto ipsec sa ipv6 Command
The following is sample output from the show crypto ipsec sa ipv6 command:
Device# show crypto ipsec sa ipv6
IPv6 IPsec SA info for interface Ethernet0/0
protected policy name:OSPFv3-1-1000
IPsec created ACL name:Ethernet0/0-ipsecv6-ACL
local ident (addr/prefixlen/proto/port):(FE80::/10/89/0)
remote ident (addr/prefixlen/proto/port):(::/0/89/0)
current_peer:::
PERMIT, flags={origin_is_acl,}
#pkts encaps:21, #pkts encrypt:0, #pkts digest:21
#pkts decaps:20, #pkts decrypt:0, #pkts verify:20
#pkts compressed:0, #pkts decompressed:0
#pkts not compressed:0, #pkts compr. failed:0
#pkts not decompressed:0, #pkts decompress failed:0
#send errors 0, #recv errors 0
local crypto endpt. ::, remote crypto endpt. ::
path mtu 1500, media mtu 1500
current outbound spi:0x3E8(1000)
inbound ESP SAs:
inbound AH SAs:
spi:0x3E8(1000)
transform:ah-md5-hmac ,
in use settings ={Transport, }
slot:0, conn_id:2000, flow_id:1, crypto map:N/R
no sa timing (manual-keyed)
replay detection support:N
inbound PCP SAs:
outbound ESP SAs:
outbound AH SAs:
spi:0x3E8(1000)
transform:ah-md5-hmac ,
in use settings ={Transport, }
slot:0, conn_id:2001, flow_id:2, crypto map:N/R
no sa timing (manual-keyed)
replay detection support:N
outbound PCP SAs: