The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This preface explains the objectives, intended audience, and organization of this Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Site Planning Guide, referred to in this document as the site planning guide , and describes the conventions used in the document.
This guide describes the basic facilities requirements, such as floor space, power requirements, environmental requirements, and so on, for the Cisco CRS 16-Slot Line Card Chassis (LCC). This guide is intended to help you in planning the site where the chassis will be installed. It should be used with Cisco Systems, Inc. site planning coordinators and site inspectors, well in advance of the delivery of the chassis.
This guide is intended for anyone who plans the facilities, including space, rack-mounting, power, cooling, cabling, delivery, and storage, for the delivery and installation of a Cisco CRS 16-Slot LCC.
Title |
Description |
---|---|
Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Overview |
Describes the Cisco CRS routing system and presents an overview of the steps required to prepare the site for the installation of a LCC. |
Space Planning |
Provides information about chassis space requirements and other site preparation details (for example, floor loading and securing the chassis to the floor). |
Power and Cooling Requirements |
Describes the power and cooling requirements for the chassis. |
Shipping and Receiving |
Describes the things to consider as you plan for the shipment of the chassis and transport to the installation site. |
System Planning Considerations |
Provides information about system planning considerations, such as high availability. |
Product IDs |
Provides the product identifiers (IDs) for orderable chassis components. |
Preliminary Site Survey |
Contains a sample preliminary site survey in which to enter information about the installation site and site-preparation process. |
Cisco CRS Series Carrier Routing System 16-Slot Line Card Chassis Specifications |
Lists the chassis specifications and provides information about wire gauges and resistances for DC power cabling. |
This document uses the following conventions:
Convention | Description |
---|---|
bold font |
Commands and keywords and user-entered text appear in bold font. |
Italic font |
Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. |
[ ] |
Elements in square brackets are optional. |
{x | y | z} |
Required alternative keywords are grouped in braces and separated by vertical bars. |
[x | y | z] |
Optional alternative keywords are grouped in brackets and separated by vertical bars. |
string |
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
courier font |
Terminal sessions and information the system displays appear in courier font. |
|
Indicates a variable for which you supply values, in context where italics cannot be used. |
< > |
Nonprinting characters such as passwords are in angle brackets. |
[ ] |
Default responses to system prompts are in square brackets. |
!, # |
An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. |
Note | Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. |
Tip | Means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver. |
Caution | Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data. |
Warning | IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. SAVE THESE INSTRUCTIONS |
Warning | Statements using this symbol are provided for additional information and to comply with regulatory and customer requirements. |
This section refers you to other documentation that contains complete planning, installation, and configuration information.
The documentation listed below is available online.
Cisco CRS Carrier Routing System 16-Slot Line Card Chassis System Description
Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Installation Guide
Cisco CRS Carrier Routing System 16-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
Cisco CRS Carrier Routing System Ethernet Physical Layer Interface Module (PLIM) Installation Note
Cisco CRS Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note
Cisco CRS Fiber-Optic Cleaning Kit Quick Start Guide
Cisco CRS Carrier Routing System Hardware Documentation Guide
Cisco CRS Carrier Routing System Regulatory Compliance and Safety Information
Date | Summary |
---|---|
July 2014 |
Added support for new 2x100GE-FLEX-40 PLIM. Added updates to support the Cisco CRS-X back-to-back and multishelf systems, which include new CRS-16-FC400/M switch fabric card. |
January 2014 |
Added updates to support the Cisco CRS-X, which includes new line cards, switch fabric cards, and PLIMs. |
September 2011 |
Updated Appendix A, Product IDs and Appendix C, Cisco CRS Series Carrier Routing System 16-Slot Line Card Chassis Specifications. |
May 2011 |
Updated the Shipping and Receiving with information about moving the chassis using the dolly supplied by Cisco. |
April 2011 |
Added information about new CRS-16-PRP-6G and CRS-16-PRP-12G Performance Route Processor (PRP) cards. Technical updates and minor editorial changes were also made. |
March 2011 |
Added information about new modular configuration AC and DC power systems. Added product IDs for the modular configuration power components. |
October 2010 |
Added information about new MSC140 and FP140 line cards; 4-port, 8-port, 14-port, and 20-port 10-GE XFP PLIMS; and 1-port 100-GE CFP PLIM. Technical updates and minor editorial changes were also made. |
January 2010 |
Updated weight and floor loading values. |
February 2008 |
Updated the document with technical corrections. |
August 2007 |
Revision includes technical corrections and other updates throughout the document. |
June 2007 |
Updated the two-pole DC power requirements. |
September 2006 |
Revision includes general technical corrections. |
April 2006 |
Changed document title. |
December 2005 |
Reorganized the document to more closely align with the steps in the site preparation process. Updated the Space Planning, and Shipping and Receiving chapters, with information about chassis dimensions and weight, required aisle clearances, and floor loading. Updated the Power and Cooling Requirements chapter, with new information on general power and grounding requirements and DC power requirements, and a few clarifications were made in the AC power section. Updated the System Planning Considerations chapter, with information about high availability. Added several new product IDs to Appendix A Product IDs. Updated chassis specifications in Appendix C Cisco CRS Series Carrier Routing System 16-Slot Line Card Chassis Specifications. Added the DC Wire Gauge and Resistance section. |
July 2004 December 2004 |
The document was released in July and updated with technical corrections in December. |
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.