Install Geo Map Resource Files (Standard and High Availability Deployment)
Installing geo map resource files for offline use in a standard or in a high availability environment involves these processes:
Note |
If a failure occurs on the primary server that requires you to reinstall Cisco EPN Manager on the primary server, you must reinstall the geo map resources on the primary server and restart the server. |
Place the Geo Map Resource Files on the Cisco EPN Manager Server
Before You Begin
-
If you plan to use a remote repository (because geo map files are large), ensure that a remote repository has been configured. For more information, see the Backup and Restore section in the Cisco Evolved Programmable Network Manager 8.0 User and Administrator Guide.
-
Ensure that the SCP is enabled on your client machine and the required ports are open.
This procedure shows you how to download and copy the geo map resources to the default local repository on the Cisco EPN Manager server.
Procedure
Step 1 |
Download the geo map compressed files to a client machine.
|
Step 2 |
Copy the geo map compressed files from the local machine to the Cisco EPN Manager server’s default local repository ( /temp directory on the client machine. The user has logged into the Cisco EPN Manager server as the Linux CLI admin user and is
retrieving the file from the client machine and copying it to /localdisk/defaultRepo on the server:
|
Install the Geo Map Resource Files on the Cisco EPN Manager Server
Before You Begin
The installation process extracts the geo map files and installs them in /opt/CSCOlumos/resources/offline_geo
. To avoid storage constraints, consider mounting additional storage on the directory by editing the /etc/fstab file after logging in as a Linux CLI admin user. If you have high availability and need to mount additional storage, be sure
to edit the /etc/fstab file on both the primary and secondary servers.
Procedure
Step 1 |
Start an SSH session with the Cisco EPN Manager server and log in as the Cisco EPN Manager CLI admin user. |
||
Step 2 |
Install the geo map resource file that is located in Example:
Where filename is the geo map resource file located in Example:
The installation takes a few minutes to complete depending on the size of the map resources.
|
Configure the Cisco EPN Manager Server to Use the Installed Map Resources
Procedure
Step 1 |
Choose , and then choose . |
Step 2 |
Check Enable Geo Maps. |
Step 3 |
Choose Installed Map Resources from the Map Provider drop-down list. |
Step 4 |
Click Save. You do not have to restart the Cisco EPN Manager server to apply your changes. A notification message informs you that the system is now working with the installed map resources. |
Verify that the Geo Maps Files Were Installed Successfully
After installing the geo map files and configuring the system to use these geo map files, check that they have been successfully installed and that they are being displayed in the GUI.
Procedure
Step 1 |
Log in to the Cisco EPN Manager web GUI as a user with Administrator privileges. |
Step 2 |
From the left sidebar menu, choose . |
Step 3 |
Click the Geographical Map icon at the top right of the topology window to display the geo map. |
Step 4 |
Verify that the desired map is displayed. |