Table 11-3 MPLS Repository Variables
|
|
|
Advertised_Routes_To_CE
|
2
|
List of one or more IP addresses of the advertised static route to be placed on the PE to define the CE’s address space.
|
CARD_TYPE
|
0
|
Refers to NPE or UNI interface depending on whether the service is implemented with ethernet access.
|
CE_BGP_AS_ID
|
0
|
BGP AS ID on a CE when the routing protocol between a CE and a PE is BGP.
|
CE_BGP_AS_ID_IPV6
|
0
|
If the Address family is IPv6, this specifies the Border Gateway Protocol (BGP) routing protocol Autonomous System (AS) number.
|
CE_DLCI
|
0
|
DLCI value on CE for Frame Relay encapsulation.
|
CE_EIGRP_AS_ID
|
0
|
EIGRP AS ID on a CE when the routing protocol between a CE and a PE is EIGRP.
|
CE_Facing_MVRFCE_BGP_AS_ID
|
0
|
BGP AS ID on an MVRFCE when the routing protocol between a CE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_DLCI
|
0
|
DLCI value on CE facing MVRFCE interface for Frame Relay encapsulation, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_EIGRP_AS_ID
|
0
|
EIGRP AS ID on an MVRFCE when the routing protocol between a CE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Intf
|
0
|
Name of the CE facing interface on an MVRFCE, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Intf_Address
|
0
|
IP address assigned to the CE facing MVRFCE interface, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Intf_Encap
|
0
|
Encapsulation for CE facing of an MVRFCE interface, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Intf_Name
|
0
|
Name of the CE facing MVRFCE interface, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Intf_Type
|
0
|
Interface type for CE facing of an MVRFCE interface, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Ospf_Process_ID
|
0
|
OSPF process ID on MVRFCE when the routing protocol between a CE and an MVRCE is OSPF, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_Tunnel_Src_
Addr
|
0
|
Tunnel source address on CE facing MVRFCE interface for GRE encapsulation when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_VCD
|
0
|
VCD value on CE facing MVRFCE interface for ATM encapsulation, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_VCI
|
0
|
VCI value on CE facing MVRFCE interface for ATM encapsulation, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_VLAN_ID
|
0
|
VLAN ID on CE facing MVRFCE interface for Ethernet encapsulation, when an MPLS link includes an MVRFCE.
|
CE_Facing_MVRFCE_VPI
|
0
|
VPI value on CE facing MVRFCE interface for ATM encapsulation, when an MPLS link includes an MVRFCE.
|
CE_Intf_Address
|
0
|
IP address assigned to the CE interface.
|
CE_Intf_Encap
|
0
|
Encapsulation of the CE interface.
|
CE_Intf_Name
|
0
|
Name of the CE interface.
|
CE_MVRFCE_Bandwidth_Metric_For_
Redistribution
|
0
|
Bandwidth metric for redistribution of EIGRP when the routing protocol between a CE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFC.
|
CE_MVRFCE_BGP_AS_ID
|
0
|
BGP AS ID on a CE when the routing protocol between a CE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
CE_MVRFCE_Delay_Metric_For_
Redistribution
|
0
|
Delay metric for redistribution of EIGRP when the routing protocol between a CE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFC.
|
CE_MVRFCE_EIGRP_AS_ID
|
0
|
EIGRP AS ID on a CE when the routing protocol between a CE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
CE_MVRFCE_Loading_Metric_For_
Redistribution
|
0
|
Loading metric for redistribution of EIGRP when the routing protocol between a CE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFC.
|
CE_MVRFCE_MTU_Metric_For_
Redistribution
|
0
|
MTU metric for redistribution of EIGRP when the routing protocol between a CE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFC.
|
CE_MVRFCE_Ospf_Process_ID
|
0
|
OSPF process ID on CE when the routing protocol between a CE and an MVRCE is OSPF, when an MPLS link includes an MVRFCE.
|
CE_Ospf_Process_ID
|
0
|
OSPF process ID on CE when the routing protocol between a CE and a PE is OSPF.
|
CE_Tunnel_Src_Addr
|
0
|
Tunnel source address on CE for GRE encapsulation.
|
CE_VCD
|
0
|
VCD value on CE for ATM encapsulation.
|
CE_VCI
|
0
|
VCI value on CE for ATM encapsulation.
|
CE_Vlan_ID
|
0
|
VLAN ID on CE for Ethernet encapsulation.
|
CE_VPI
|
0
|
VPI value on CE for ATM encapsulation.
|
Export_Map
|
0
|
Name of the export map associated with the VRF.
|
Extra_CE_Loopback_Required
|
0
|
Flag to indicate whether an extra loopback request is required on the CE.
|
Import_Map
|
0
|
Name of the import map associated with the VRF.
|
Is_Default_Info_Originate
|
0
|
Flag to indicate whether the
default-information originate
command for BGP on the PE when STATIC is a running protocol between a CE and a PE.
|
Is_Default_Info_Originate_IPV6
|
0
|
If the Address family is IPv6, Flag to indicate whether the default-information originate command for BGP on the PE when STATIC is a running protocol between a CE and a PE.
|
Is_Default_Routes_Sent_To_CE
|
0
|
Flag to indicate whether the default routes are sent to a remote CE.
|
Join_Grey_Mgmt_Vpn
|
0
|
Flag to indicate whether MPLS will join a Grey Management VPN.
|
Max_route_threshold
|
0
|
Percentage of the maximum number of routes that can be imported into the VRF.
|
Max_Routes
|
0
|
Maximum number of routes than can be imported into the VRF.
|
MPLSCeInterfaceMask
|
0
|
The mask of the IP address assigned to the CE interface for a particular MPLS VPN link.
|
MPLSCeLoopbackAddress
|
0
|
The IP address of the extra CE loopback address for a particular MPLS VPN link.
|
MPLSCLECeFacingEncapsulation
|
0
|
The encapsulation of the interface on the device facing the CE for that particular MPLS VPN link.
|
MPLSCLECeFacingInterfaceName
|
0
|
The name of the interface on the device facing the CE for that particular MPLS VPN link.
|
MPLSCLEPeFacingEncapsulation
|
0
|
The encapsulation of the interface on the device facing the PE for that particular MPLS VPN link.
|
MPLSCLEPeFacingInterfaceName
|
0
|
The name of the interface on the device facing the PE for that particular MPLS VPN link.
|
MPLSExportRouteTargets
|
1
|
List of Route Targets that are exported for a particular VRF associated with the MPLS VPN link.
|
MPLSImportRouteTargets
|
1
|
List of Route Targets that are imported for a particular VRF associated with the MPLS VPN link.
|
MPLSPeInterfaceMask
|
0
|
The mask of the IP address assigned to the PE interface for a particular MPLS VPN link.
|
Multicast_Enabled_IPv6
|
0
|
Enabling and disabling a Multicast IPv6 VPN. If the check box is enabled, Multicast IPv6 VPN configlets are generated.
|
Multicast_Route_Limit
|
0
|
Multicast route limit value for the VRF
|
MVRFCE_CE_Advertised_Routes_To_
CE
|
2
|
List of one or more IP addresses of the advertised static route to be placed on the PE to define the CE’s address space, when the MPLS link includes an MVRFCE.
|
MVRFCE_CE_IP_Unnumbered
|
0
|
Flag to indicate whether the MVRCE to CE link is unnumbered, when an MPLS link includes an MVRFCE.
|
MVRFCE_CE_Is_Default_routes_Sent_To_CE
|
0
|
Flag to indicate whether the default routes are sent to a remote CE, when an MPLS link includes an MVRFCE.
|
MVRFCE_CE_NBR_ALLOW_AS_IN
|
0
|
AllowASIn flag when the routing protocol between a CE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
MVRFCE_CE_NBR_AS_OVERRIDE
|
0
|
ASOverride flag when the routing protocol between a CE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
MVRFCE_CE_Ospf_Area_Number
|
0
|
OSPF area number when the routing protocol between a CE and an MVRCE is OSPF, when an MPLS link includes an MVRFCE.
|
MVRFCE_CE_Ospf_Route_Policy
|
0
|
Name of the Redistribute OSPF route policy to be configured when an MPLS link includes an MVRFCE_CE.
|
MVRFCE_CE_Routes_To_Reach_
Other_Sites
|
2
|
List of one or more IP addresses to specify the static routes to put on the CE, when the MPLS link includes an MVRFCE.
|
MVRFCE_CE_Routing_Protocol
|
0
|
Routing protocol between MVRFCE and CE.
|
PE_BGP_AS_ID
|
0
|
BGP AS ID on a PE when the routing protocol between a CE and a PE is BGP.
|
PE_Cable_Both_Helper_Address_List
|
1
|
List of DHCP server IP addresses to which both cable modem and host UDP broadcasts are forwarded.
|
PE_Cable_Modem_Helper_Address_list
|
1
|
List of DHCP server IP addresses to which cable modem UDP broadcasts are forwarded.
|
PE_Cable_Modem_Host_Helper_
Address_List
|
1
|
List of DHCP server IP addresses to which host UDP broadcasts are forwarded.
|
PE_Cable_Modem_Secondary_Address_
List
|
1
|
List of cable modem secondary addresses for cable interfaces.
|
PE_CE_Bandwidth_Metric_For_
Redistribution
|
0
|
Bandwidth metric for redistribution of EIGRP when the routing protocol between a CE and a PE is EIGRP.
|
PE_CE_BGP_ADVERTISE_
INTERVAL_IPV6
|
|
Advertising interval value for BGP routing protocol if the Address family is IPv6.
|
PE_CE_BGP_DEFAULT_ORIGINATE_ROUTE_POLICY_IPV4
|
0
|
Default orginate route policy name when the routing protocol between a CE and a PE is BGP.
|
PE_CE_BGP_DEFAULT_ORIGINATE_ROUTE_POLICY_IPV6
|
0
|
Default orginate route policy name when the routing protocol between a CE and a PE is BGP, if the address family is IPV6.
|
PE_CE_BGP_MAX_PREFIX_NUMBER
|
0
|
BGPNieghbor MaxPrefix value for BGP routing protocol.
|
PE_CE_BGP_MAX_PREFIX_NUMBER_IPV6
|
0
|
BGPNieghbor MaxPrefix value for BGP routing protocol, if the Address family is IPv6.
|
PE_CE_BGP_MAX_PREFIX_RESTART
|
0
|
BGPNieghborMaxprefix restart value for BGP routing protocol.
|
PE_CE_BGP_MAX_PREFIX_RESTART_IPV6
|
0
|
BGPNieghborMaxprefix restart value for BGP routing protocol, if the address family is IPv6.
|
PE_CE_BGP_MAX_PREFIX_THRESHOLD
|
0
|
BGPNieghborMaxprefix threshold value for BGP routing protocol.
|
PE_CE_BGP_MAX_PREFIX_THRESHOLD_IPV6
|
0
|
BGPNieghborMaxprefix threshold value for BGP routing protocol, if the address family is IPv6.
|
PE_CE_BGP_MAX_PREFIX_WARNING_ONLY
|
0
|
BGPNieghborMaxprefix warnily_only (enable/disable).
|
PE_CE_BGP_MAX_PREFIX_WARNING_ONLY_IPV6
|
0
|
BGPNieghborMaxprefix warnily_only (enable/disable), if the Address family is IPv6.
|
PE_CE_BGP_Neighbor_Route_Map_
Or_Policy_In
|
0
|
Name of the BGP Neighbor Route Map/Policy In to be configured on the device.
|
PE_CE_BGP_Neighbor_Route_Map_
Or_Policy_Out
|
0
|
Name of the BGP Neighbor Route Map/Policy Out to be configured on the device.
|
PE_CE_Delay_Metric_For_
Redistribution
|
0
|
Delay metric for redistribution of EIGRP when the routing protocol between a CE and a PE is EIGRP.
|
PE_CE_EIGRP_AUTHENTICATION_KEY_CHAIN_NAME
|
0
|
Keychain name to authenticate EIGRP protocol traffic on one or more interfaces, if the Routing protocol between CE and PE is EIGRP.
|
PE_CE_EIGRP_AUTHENTICATION_KEY_CHAIN_NAME_IPV6
|
0
|
If the address family is IPV6, this specifies keychain name to authenticate EIGRP protocol traffic on one or more interfaces if the routing protocol between CE and PE is EIGRP
|
PE_CE_IP_Unnumbered
|
0
|
Flag to indicate whether the PE to CE link is unnumbered.
|
PE_CE_IPV6_Routing_Protocol
|
0
|
Routing protocol between PE and CE if the address family is IPv6.
|
PE_CE_Loading_Metric_For_
Redistribution
|
0
|
Loading metric for redistribution of EIGRP when the routing protocol between a CE and a PE is EIGRP.
|
PE_CE_MTU_Metric_For_
Redistribution
|
0
|
MTU metric for redistribution of EIGRP when the routing protocol between a CE and a PE is EIGRP.
|
PE_CE_NBR_Allow_AS_In
|
0
|
AllowASIn flag when the routing protocol between a CE and a PE is BGP.
|
PE_CE_NBR_Allow_AS_In_IPV6
|
0
|
If the Address family is IPv6, AllowASIn flag when the routing protocol between a CE and a PE is BGP.
|
PE_CE_NBR_AS_Override
|
0
|
ASOverride flag when the routing protocol between a CE and a PE is BGP.
|
PE_CE_NBR_AS_Override_IPV6
|
0
|
If the Address family is IPv6, ASOverride flag when the routing protocol between a CE and a PE is BGP.
|
PE_CE_NBR_Send_Community_IPV6
|
0
|
If the Address family is IPv6, then these values specify the “Standard”, “extended”, “Both” of the Send_Community attribute.
|
PE_CE_Ospf_Area_Number
|
0
|
OSPF area number when the routing protocol between a CE and a PE is OSPF.
|
PE_CE_Ospf_Match_Internal_External
|
0
|
Name of the Redistribute OSPF match criteria to be configured on the device.
|
PE_CE_OSPF_METRIC_TYPE
|
0
|
Metric type when the routing protocol between a CE and a PE is OSPF.
|
PE_CE_OSPF_METRIC_VALUE
|
0
|
Metric value when the routing protocol between a CE and a PE is OSPF.
|
PE_CE_Ospf_Route_Policy
|
0
|
Name of the Redistribute OSPF route policy to be configured on the device.
|
PE_CE_OSPF_ROUTE_POLICY
|
0
|
Route policy name when the routing protocol between a CE and a PE is OSPF.
|
PE_CE_Reliability_Metric_For_
Redistribution
|
0
|
Reliability metric for redistribution of EIGRP when the routing protocol between a CE and a PE is EIGRP.
|
PE_CE_Routing_Protocol
|
0
|
Routing protocol between PE and CE.
|
PE_DLCI
|
0
|
DLCI value on PE for Frame Relay encapsulatio.n
|
PE_EIGRP_AS_ID
|
0
|
EIGRP AS ID on a PE when the routing protocol between a CE and a PE is EIGRP.
|
PE_Facing_MVRFCE_BGP_AS_ID
|
0
|
BGP AS ID on an MVRFCE when the routing protocol between a PE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_DLCI
|
0
|
DLCI value on PE facing MVRFCE interface for Frame Relay encapsulation, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_EIGRP_AS_ID
|
0
|
EIGRP AS ID on an MVRFCE when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_Intf
|
0
|
Name of the PE facing interface on an MVRFCE, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_Intf_Address
|
0
|
IP address assigned to the PE facing MVRFCE interface, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_Intf_Encap
|
0
|
Encapsulation for PE facing of an MVRFCE interface, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_Intf_Name
|
0
|
Name of the PE facing MVRFCE interface, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_Intf_Type
|
0
|
Interface type for PE facing of an MVRFCE interface, when an MPLS link includes an MVRFCE.
|
PE_FACING_MVRFCE_OSPF_
Process_ID
|
0
|
OSPF process ID on an MVRFCE when the routing protocol between a PE and an MVRCE is OSPF, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_Tunnel_Src_Addr
|
0
|
Tunnel source address on PE facing MVRFCE interface for GRE encapsulation when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_VCD
|
0
|
VCD value on PE facing MVRFCE interface for ATM encapsulation, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_VCI
|
0
|
VCI value on PE facing MVRFCE interface for ATM encapsulation, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_VLAN_ID
|
0
|
VLAN ID on PE facing MVRFCE interface for Ethernet encapsulation, when an MPLS link includes an MVRFCE.
|
PE_Facing_MVRFCE_VPI
|
0
|
VPI value on PE facing MVRFCE interface for ATM encapsulation, when an MPLS link includes an MVRFCE.
|
PE_Intf_Address
|
0
|
IP address assigned to the PE interface.
|
PE_Intf_Address_IPV6
|
0
|
If the Address family is IPv6, this specifies the IP address of the interface.
|
PE_Intf_Desc
|
0
|
Interface description for the PE interface.
|
PE_Intf_Encap
|
0
|
Encapsulation of the PE interface.
|
PE_Intf_Name
|
0
|
Name of the PE interface.
|
PE_Intf_Shutdown
|
0
|
Shutdown flag for the PE interface.
|
PE_IS_Cable_Modem_Maintenance_
Interface
|
0
|
Flag to indicate whether the interface is a maintenance interface.
|
PE_MVRFCE_Bandwidth_Metric_For_Redistribution
|
0
|
Bandwidth metric for redistribution of EIGRP when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_BGP_AS_ID
|
0
|
BGP AS ID on a PE when the routing protocol between a PE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_Delay_Metric_For_
Redistribution
|
0
|
Delay metric for redistribution of EIGRP when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_EIGRP_AS_ID
|
0
|
EIGRP AS ID on a PE when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_IP_Unnumbered
|
1
|
Flag to indicate whether the PE to MVRFCE link is unnumbered, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_Loading_Metric_For_
Redistribution
|
0
|
Loading metric for redistribution of EIGRP when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_MTU_Metric_for_
redistribution
|
0
|
MTU metric for redistribution of EIGRP when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_NBR_ALLOW_AS_IN
|
0
|
AllowASIn flag when the routing protocol between a PE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_NBR_AS_OVERRIDE
|
0
|
ASOverride flag when the routing protocol between a PE and an MVRFCE is BGP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_Ospf_Area_Number
|
0
|
OSPF area number when the routing protocol between a PE and an MVRCE is OSPF, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_OSPF_Process_ID
|
0
|
OSPF process ID on PE when the routing protocol between a PE and an MVRCE is OSPF, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_Ospf_Route_Policy
|
0
|
Name of the Redistribute OSPF route policy to be configured when an MPLS link includes a PE_MVRFCE.
|
PE_MVRFCE_Reliability_Metric_For_Redistribution
|
0
|
Reliability metric for redistribution of EIGRP when the routing protocol between a PE and an MVRFCE is EIGRP, when an MPLS link includes an MVRFCE.
|
PE_MVRFCE_Routing_Protocol
|
0
|
Routing protocol between PE and MVRFCE, when an MPLS link includes an MVRFCE.
|
PE_OSPF_PROCESS_ID
|
0
|
OSPF process ID on PE when the routing protocol between a CE and a PE is OSPF.
|
PE_Tunnel_Src_Addr
|
0
|
Tunnel source address on PE for GRE encapsulation.
|
PE_VCD
|
0
|
VCD value on PE for ATM encapsulation.
|
PE_VCI
|
0
|
VCI value on PE for ATM encapsulation.
|
PE_Vlan_ID
|
0
|
VLAN ID on PE for Ethernet encapsulation.
|
PE_VPI
|
0
|
VPI value on PE for ATM encapsulation.
|
rd
|
0
|
Route Distinguisher value for the VRF.
|
RD_FORMAT
|
0
|
Defines the RD Format to be used in the MPLS Link, such as RD_AS or RD_IPADDR.
|
RD_IPADDRESS
|
0
|
Defines the RD_IPADDRESS Value to be used in the MPLS Link, if the RD Format is RD_IPADDRESS.
|
Redistribute_Connected
|
0
|
Flag to indicate whether the connected routes are redistributed into BGP on the PE.
|
Redistribute_Connected_IPV6
|
0
|
Flag to indicate whether the connected routes are redistributed into BGP on the PE, if the address family is IPv6.
|
Redistribute_Static
|
0
|
Flag to indicate whether the static routes are redistributed into BGP on the PE.
|
Redistribute_Static_IPV6
|
0
|
Flag to indicate whether the static routes are redistributed into BGP on the PE, if the Address family is IPv6
|
Redistributed_Protocol
|
1
|
List of routing protocols to be redistributed.
|
Rip_Metrics
|
0
|
Metric for redistribution associated with RIP.
|
Routes_To_Reach_Other_Sites
|
2
|
List of one or more IP addresses to specify the static routes to put on the CE.
|
vrfName
|
0
|
Name of the VRF.
|