- About this Guide
- Chapter 1, Install the Shelf and Backplane Cable
- Chapter 2, Install Cards and Fiber-Optic Cable
- Chapter 3, Connect the PC and Log into the GUI
- Chapter 4, Turn Up Node
- Chapter 5, Turn Up a DWDM Node
- Chapter 6, Turn Up Network
- Chapter 7, Turn Up DWDM Network
- Chapter 8, Create Circuits and VT Tunnels
- Chapter 9, Manage Alarms
- Chapter 10, Monitor Performance
- Chapter 11, Manage Circuits
- Chapter 12, Change Node Settings
- Chapter 13, Change Card Settings
- Chapter 14, Upgrade Cards and Spans
- Chapter 15, Convert Network Configurations
- Chapter 16, Add and Remove BLSR and Path Protection Nodes
- Chapter 17, Maintain the Node
- Chapter 18, Power Down the Node
- Appendix A, CTC Information and Shortcuts
- Appendix B, Shelf Assembly Specifications
- Glossary
Specifications
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This appendix contains hardware and software specifications for the ONS 15454.
Bandwidth
The ONS 15454 has the following bandwidth specifications:
•Total bandwidth: 240 Gbps
•Data plane bandwidth: 160 Gbps
•SONET plane bandwidth: 80 Gbps
Configurations
The ONS 15454 can be configured as follows:
•Two-fiber path protection
•Path protected mesh network (PPMN)
•Two-fiber bidirectional line switch ring (BLSR)
•Four-fiber BLSR
•Add-drop multiplexer
•Terminal mode
•Regenerator mode
•Hubbed rings
•Multihubbed rings
•Point-to-point
•Linear
•Linear with optical add/drop multiplexing (OADM)
Cisco Transport Controller
Cisco Transport Controller (CTC), the ONS 15454 craft interface software, has the following specifications:
•10 BaseT
•TCC+/TCC2 access: RJ-45 connector
•Backplane access: LAN pin field
External LAN Interface
The ONS 15454 external LAN interface has the following specifications:
•10 BaseT Ethernet
•Backplane access: LAN pin field
TL1 Craft Interface
The ONS 15454 TL1 craft interface has the following specifications:
•Speed: 9600 bps
•TCC+/TCC2 access: EIA/TIA-232 DB-9 type connector
•Backplane access: CRAFT pin field
Modem Interface
The ONS 15454 modem interface has the following specifications:
•Hardware flow control
•TCC+/TCC2: EIA/TIA-232 DB-9 type connector
Alarm Interface
The ONS 15454 alarm interface has the following specifications:
•Visual: Critical, Major, Minor, Remote
•Audible: Critical, Major, Minor, Remote
•Alarm contacts: 0.045 mm, -48 V, 50 mA
•Backplane access: Alarm pin fields
EIA Interface
The ONS 15454 EIA interface has the following specifications:
•SMB: AMP #415504-3 75-ohm, 4-leg connectors
•BNC: Trompeter #UCBJ224 75-ohm 4 leg connector (King or ITT are also compatible)
•AMP Champ: AMP#552246-1 with #552562-2 bail locks
BITS Interface
The ONS 15454 BITS interface has the following specifications:
•2 DS-1 building integrated timing supply (BITS) inputs
•2 derived DS-1 outputs
•Backplane access: BITS pin field
System Timing
The ONS 15454 has the following system timing specifications:
•Stratum 3 per Telcordia GR-253-CORE
•Free running accuracy: ± 4.6 ppm
•Holdover stability: 3.7 x10-7/day, including temperature (< 255 slips in first 24 hours)
•Reference: External BITS, line, internal
Power Specifications
System Power
The ONS 15454 has the following power specifications:
•Input power: -48 VDC
•Power consumption: 55 W (fan tray only); 650 W (maximum draw w/cards)
•Power requirements: -42 to -57 VDC
•Power terminals: #6 Lug
•ANSI shelf: 100-A fuse panel (minimum 30mA fuse per shelf)
NEBS3 shelf: 80-A fuse panel (minimum 20 A fuse per shelf)
Cards
Table B-1 provides power consumption information for the ONS 15454 cards.
|
|
|
|
|
---|---|---|---|---|
|
TCC+ |
9.82 |
0.20 |
33.53 |
TCC2 |
26.00 |
0.54 |
88.8 |
|
XC |
29.00 |
0.60 |
99 |
|
XCVT |
34.40 |
0.72 |
117.46 |
|
XC10G |
34.40 |
.72 |
117.46 |
|
AIC |
6.01 |
0.12 |
20.52 |
|
AIC-I |
8 |
0.17 |
27.3 |
|
AEP |
3 |
(from +5 VDC from AIC-I) |
10.2 |
|
|
EC1-12 |
36.60 |
0.76 |
124.97 |
DS1-14 |
12.60 |
0.26 |
43.02 |
|
DS1N-14 |
12.60 |
0.26 |
43.02 |
|
DS3-12 |
38.20 |
0.79 |
130.43 |
|
DS3N-12 |
38.20 |
0.79 |
130.43 |
|
DS3-12E |
26.80 |
0.56 |
91.51 |
|
DS3N-12E |
26.80 |
0.56 |
91.51 |
|
DS3XM-6 Transmux |
20 |
0.42 |
68 |
|
|
OC3 IR 4 |
19.20 |
0.40 |
65.56 |
OC3 IR 4/STM1 SH 1310 |
19.20 |
0.40 |
65.56 |
|
OC3 IR 4/STM1SH 1310-8 |
26.00 |
0.48 |
78.5 |
|
OC12 IR 1310 |
10.90 |
0.23 |
37.22 |
|
OC12 LR 1310 |
9.28 |
0.19 |
31.68 |
|
OC12 LR 1550 |
9.28 |
0.19 |
31.68 |
|
OC12 LR/STM4 LH 1310 |
9.28 |
0.19 |
31.68 |
|
OC12 LR/STM4 LH 1550 |
9.28 |
0.19 |
31.68 |
|
OC12 IR/STM4 SH 1310-4 |
35.60 |
0.74 |
121.6 |
|
OC48 IR 1310 |
32.20 |
0.67 |
109.94 |
|
OC48 LR 1550 |
26.80 |
0.56 |
91.50 |
|
OC48 IR/STM16 SH AS 1310 |
37.20 |
0.77 |
127.01 |
|
OC48 LR/STM16 LH AS 1550 |
37.20 |
0.77 |
127.01 |
|
OC48 ELR/STM16 EH 100 GHz |
31.20 |
0.65 |
106.53 |
|
OC48 ELR 200 GHz |
31.20 |
0.65 |
106.53 |
|
OC192 SR/STM64 IO H 1310 |
48.00 |
1.00 |
163.68 |
|
OC192 IR/STM64 SH 1550 |
48.00 |
1.00 |
163.68 |
|
OC192 LR/STM64 LH 1550 |
72.20 |
1.50 |
246.52 |
|
OC192 LR/STM64 LH 15xx.xx |
48.00 |
1.00 |
163.68 |
|
TXP_MR_10G |
35.001 |
0.73 |
119.5 |
|
MXP_2.5G_10G |
501 |
1.04 |
170.7 |
|
2.5G_MR_TXP |
35.002 |
0.73 |
119.5 |
|
2.5G_MR_TXP-P |
501 |
1.04 |
170.5 |
|
|
OSCM |
Nominal 23 Maximum 26 |
Nominal 0.48 Maximum 0.54 |
Nominal 78.48 Maximum 88.71 |
OSC-CSM |
Nominal 24 Maximum 27 |
Nominal 0.5 Maximum 0.56 |
Nominal 81.89 Maximum 92.12 |
|
OPT-PRE |
Minimum 25 Nominal 30 Maximum39 |
Minimum 0.52 Nominal 0.5 Maximum 0.81 |
Minimum 85.3 Nominal 102.36 Maximum 88.71 |
|
OPT-BST |
Nominal 30 Maximum 39 |
Nominal 0.63 Maximum 0.81 |
Nominal 102.36 Maximum 88.71 |
|
32 MUX-O |
Nominal 16 Maximum 25 |
Nominal 0.33 Maximum 0.52 |
Nominal 54.59 Maximum 85.3 |
|
32 DMX-O |
Nominal 16 Maximum 25 |
Nominal 0.33 Maximum 0.52 |
Nominal 54.59 Maximum 85.3 |
|
4MD-xx.x |
Nominal 17 Maximum 25 |
Nominal 0.35 Maximum 0.52 |
Nominal 58.0 Maximum 85.3 |
|
AD-1C-xx.x |
Nominal 17 Maximum 25 |
Nominal 0.35 Maximum 0.52 |
Nominal 58.0 Maximum 85.3 |
|
AD-2C-xx.x |
Nominal 17 Maximum 25 |
Nominal 0.35 Maximum 0.52 |
Nominal 58.0 Maximum 85.3 |
|
AD-4C-xx.x |
Nominal 17 Maximum 25 |
Nominal 0.35 Maximum 0.52 |
Nominal 58.0 Maximum 85.3 |
|
AD-1B-xx.x |
Nominal 17 Maximum 25 |
Nominal 0.35 Maximum 0.52 |
Nominal 58.0 Maximum 85.3 |
|
AD-4B-xx.x |
Nominal 17 Maximum 25 |
Nominal 0.35 Maximum 0.52 |
Nominal 58.0 Maximum 85.3 |
|
|
E100T-12 |
65 |
1.35 |
221.93 |
E1000-2 |
53.50 |
1.11 |
182.67 |
|
E100T-G |
65 |
1.35 |
221.93 |
|
E1000-2-G |
53.50 |
1.11 |
182.67 |
|
G1000-4 |
63.00 |
1.31 |
215.11 |
1 Calculated power; measured power was not available at the time of publication. 2 Calculated power; measured power was not available at the time of publication. |
Environmental Specifications
System
The ONS 15454 has the following environmental specifications:
•Operating temperature: 0 to +55 degrees Celsius; -40 to +65 degrees Celsius with industrial temperature rated cards
•Operating humidity: 5 to 95%, noncondensing
Cards
Table B-2 provides temperature ranges and product names for ONS 15454 cards.
Note The I-Temp symbol is displayed on the faceplate of an I-Temp compliant card. A card without this symbol is C-Temp compliant.
Dimensions
The ONS 15454 shelf assembly has the following dimensions:
•Height: 18.5 in. (40.7 cm)
•Width: 19 or 23 in. (41.8 or 50.6 cm) with mounting ears attached
•Depth: 12 in. (26.4 cm) (5 in. or 12.7 cm projection from rack)
•Weight: 55 lb (24.947 kg) empty