- About This Guide
- Chapter 1, ACT Commands
- Chapter 2, ALW Commands
- Chapter 3, APPLY Commands
- Chapter 4, CANC Commands
- Chapter 5, CHG Commands
- Chapter 6, CLR Commands
- Chapter 7, CONN Commands
- Chapter 8, COPY Commands
- Chapter 9, DISC Commands
- Chapter 10, DLT Commands
- Chapter 11, ED Commands
- Chapter 12, ENT Commands
- Chapter 13, EX Commands
- Chapter 14, INH Commands
- Chapter 15, INIT Commands
- Chapter 16, OPR Commands
- Chapter 17, REPT Messages
- Chapter 18, RLS Commands
- Chapter 19, RMV Commands
- Chapter 20, RST Commands
- Chapter 21, RTRV Commands
- Chapter 22, SCHED Commands
- Chapter 23, SET Commands
- Chapter 24, SW Commands
- Chapter 25, Access Identifiers
- Chapter 26, Conditions
- Chapter 27, Modifiers
- 17.1 REPT ALM <MOD2ALM>
- 17.2 REPT ALM BITS
- 17.3 REPT ALM COM
- 17.4 REPT ALM ENV
- 17.5 REPT ALM EQPT
- 17.6 REPT ALM SECU
- 17.7 REPT ALM SYNCN
- 17.8 REPT DBCHG
- 17.9 REPT EVT <MOD2ALM>
- 17.10 REPT EVT BITS
- 17.11 REPT EVT COM
- 17.12 REPT EVT ENV
- 17.13 REPT EVT EQPT
- 17.14 REPT EVT FXFR
- 17.15 REPT EVT IOSCFG
- 17.16 REPT EVT SECU
- 17.17 REPT EVT SESSION
- 17.18 REPT EVT SYNCN
- 17.19 REPT PM <MOD2>
- 17.20 REPT SW
REPT Messages
This chapter provides REPT (report) messages for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL.
17.1 REPT ALM <MOD2ALM>
Report Alarm (1GFC, 1GFICON, 2GFC, 2GFICON, CLNT, DS1, E100, E1000, E3, E4, EC1, FSTE, G1000, GFPOS, GIGE, OC12, OC192, OC3, OC48, OCH, OMS, OTS, POS, STS1, STS12C, STS18C, STS192C, STS24C, STS36C, STS3C, STS48C, STS6C, STS9C, T1, T3, UDCDCC, UDCF, VC12, VC3, VCG, VT1, VT2, WLEN)
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports an alarm condition against a facility or a path.
See Table 27-1 on page 27-1 for supported modifiers by platform.
Category
Fault
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM <MOD2ALM>
"<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],
[<OCRTM>],,:[<DESC>],[<AIDDET>]"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM 1GFC
"FAC-2-1:MJ,LOS,SA,08-01,14-25-59,,:\"LOSS OF SIGNAL\",OC12"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.1 ALL" section on page 25-1 |
NTFCNCDE |
Two-letter notification code Parameter type is NOTIF_CODE—two-character notification code associated with an autonomous message |
• |
The condition causing the alarm has cleared |
• |
A critical alarm |
• |
A major alarm |
• |
A minor alarm |
• |
The condition is not alarmed |
• |
The alarm is not reported |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether the problem is reported (that is, whether it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
SRVEFF |
The effect on service caused by the standing alarm or condition Parameter type is SERV_EFF—the effect of the alarm on service |
• |
The condition is non-service affecting |
• |
The condition is service affecting |
OCRDAT |
Date. Optional |
OCRTM |
Time. Optional |
DESC |
Condition description. Optional |
AIDDET |
AIDDET uses the same addressing rules as the AID, but specifies AID type and additional details about the entity being managed. Optional Parameter type is EQPT_TYPE—the type of equipment being provisioned into a slot |
• |
Optical Add/Drop Multiplexed (OADM) 1 Band Filter |
• |
Optical Add/Drop Multiplexed (OADM) 1 Channel Filter |
• |
Optical Add/Drop Multiplexed (OADM) 2 Channels Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Bands Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Channels Filter |
• |
The AICI card |
• |
The Alarm Indicator Panel |
• |
Alarm Power |
• |
ASAP Carrier card with four PIM slots |
• |
The Backplane of the NE |
• |
8 port CE-100T card on ONS 15454 and ONS 15310-CL |
• |
Craft Timing |
• |
The Data Communications Channel |
• |
Optical De/Multiplexed (DMX) 32 Channels |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A 3 port interface card supporting DS3 facilities |
• |
High Density DS3/EC1 card supporting 48 ports |
• |
A 12 port interface card supporting DS3 ATM facilities |
• |
Cost reduced DS3 |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
An interface card that converts six framed DS-3 network connections to 28x6 or 168 VT1.5s |
• |
A 2 port interface card supporting 1000 Base T Ethernet facilities |
• |
A 12 port interface card supporting 100 Base T Ethernet facilities |
• |
A 4 port interface card supporting 100 Base T Ethernet facilities (ONS 15327) |
• |
A 12 port interface card supporting EC1 facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
Smart Filler card (ONS 15600) |
• |
The Fan Tray of the NE |
• |
The Fan Tray 1 of the NE |
• |
The Fan Tray 2 of the NE |
• |
A four port G1000 card |
• |
Optical Multiplexer/Demultiplexer with 4 Channels |
• |
ONS 15327 MIC card A |
• |
ONS 15327 MIC card B |
• |
ONS 15327 MIC card |
• |
ONS 15327 MIC card |
• |
8 port ML-100T card (ONS 15310-CL) |
• |
Optical Multiplexed (MUX) 32 Channels |
• |
10G (4 * 2.5G) Muxponder Card |
• |
An interface card that supports one or more OC-12 (622Mbs) optical facilities |
• |
OC12 card (ONS 15327) |
• |
A four port OC12 card |
• |
An interface card that supports one intermediate-range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one long-range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one short-range OC-12 (622Mbs) optical facilities |
• |
4 port OC-192 card (ONS 15600) |
• |
An interface card that supports one or more OC-192 optical facilities |
• |
An interface card that supports multiple OC-3 (155Mbs) optical facilities |
• |
ONS 15327 OC3 card |
• |
An interface card that supports four intermediate range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports four short range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports six intermediate range OC-3 (155Mbs) ATM optical fibers |
• |
An OC3 card which has 8 ports over the lower speed slot of the ONS 15454 with XC10G/192 |
• |
An interface card that supports four short range OC-3 (155Mbs) POS optical facilities |
• |
An interface card that supports one or more OC-48 optical facilities |
• |
ONS 15327 OC-48 card |
• |
An interface card that supports one short range OC-48 (10Gbs) optical facilities that can be provisioned in any I/O slot |
• |
An interface card that supports one short range OC-48 (2.5Gbs) optical facility |
• |
An interface card that supports one intermediate range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one long range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one short range OC-48 (10Gbs) optical facilities |
• |
16 port OC48 card (ONS 15600) |
• |
Optical Booster Amplifier |
• |
Optical Preamplifier |
• |
Optical Service Channel (OSC) with Combiner/Separator Module (SCM) |
• |
Optical Service Channel (OSC) Module |
• |
Pluggable interface module with 4 PPM slots |
• |
Pluggable port module with 1 port SFP module |
• |
Cross connect card (ONS 15600) |
• |
The Timing Communication and Control card |
• |
Timing and synchronization controller card (ONS 15600) |
• |
10G Multirate Transponder Card |
• |
Multirate 2.5G Unprotected |
• |
Multirate 2.5G Protected |
• |
A Cross-Connect card |
• |
A Cross-Connect card |
• |
ONS 15327 XTC card |
• |
ONS 15327 XTC DS1-14 card |
• |
ONS 15327 XTC DS1-28 card |
• |
ONS 15327 XTC DS1-56 card |
• |
ONS 15327 XTC DS3-3 card |
17.2 REPT ALM BITS
Report Alarm Building Integrated Timing Supply
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports an alarm condition on a BITS facility.
Category
Synchronization
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM BITS
"<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],[<OCRTM>],,:[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM BITS
"BITS-1:MJ,SYNC,SA,08-01,14-25-59,,:\"LOSS OF TIMING\""
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.5 BITS" section on page 25-13 |
NTFCNCDE |
Two-letter notification code Parameter type is NOTIF_CODE—two-character notification code associated with an autonomous message |
• |
The condition causing the alarm has cleared |
• |
A critical alarm |
• |
A major alarm |
• |
A minor alarm |
• |
The condition is not alarmed |
• |
The alarm is not reported |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether or not the problem is reported (that is, whether or not it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
OCRDAT |
Date. Optional |
OCRTM |
Time. Optional |
SRVEFF |
The effect on service caused by the standing alarm or condition |
Parameter type is SERV_EFF—the effect of the alarm on service |
|
• |
The condition is non-service affecting |
• |
The condition is service affecting |
DESC |
Condition description. Optional |
17.3 REPT ALM COM
Report Alarm Common
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports an alarm condition when an AID cannot be given, for example, a fan failure is reported using this message.
Category
Fault
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM COM
"[<AID>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],[<OCRTM>],,:[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM COM
"COM:MJ,FAN,NSA,08-01,14-25-59,,:\"FAN FAILURE\""
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier. Identifies the entity to which the command pertains. Indicates an alarm without AID. String. Optional |
NTFCNCDE |
Two-letter notification code Parameter type is NOTIF_CODE—two-character notification code associated with an autonomous message |
• |
The condition causing the alarm has cleared |
• |
A critical alarm |
• |
A major alarm |
• |
A minor alarm |
• |
The condition is not alarmed |
• |
The alarm is not reported |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether the problem is reported (that is, whether it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
OCRDAT |
Date. Optional |
OCRTM |
Time. Optional |
SRVEFF |
The effect on service caused by the standing alarm or condition |
Parameter type is SERV_EFF—the effect of the alarm on service |
|
• |
The condition is non-service affecting |
• |
The condition is service affecting |
DESC |
Condition description. Optional |
17.4 REPT ALM ENV
Report Alarm Environment
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports a customer-defined condition on an environmental alarm input.
Category
Environment
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM ENV
"<AID>:<NTFCNCDE>,<ALMTYPE>,[<OCRDAT>],[<OCRTM>],[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM ENV
"ENV-IN-1:MJ,OPENDR,08-01,14-25-59,\"OPEN DOOR\""
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.12 ENV" section on page 25-26. Identifies an environmental input |
NTFCNCDE |
Two-letter notification code Parameter type is NOTIF_CODE—two-character notification code associated with an autonomous message |
• |
The condition causing the alarm has cleared |
• |
A critical alarm |
• |
A major alarm |
• |
A minor alarm |
• |
The condition is not alarmed |
• |
The alarm is not reported |
ALMTYPE |
Abbreviated code identifying the alarm Parameter type is ENV_ALM—environmental alarm types |
• |
Air compressor failure |
• |
Air conditioning failure |
• |
Air dryer failure |
• |
Battery discharging |
• |
Battery failure |
• |
Cooling fan failure |
• |
Centralized power major failure |
• |
Centralized power minor failure |
• |
Engine failure |
• |
Engine operating |
• |
Standby engine transfer |
• |
Explosive gas |
• |
Fire detector failure |
• |
Fire |
• |
Flood |
• |
Fuel leak |
• |
Fuse failure |
• |
Explosive gas, toxic gas, ventilation fail or gas monitor fail |
• |
CEV hatch fail |
• |
Generator failure |
• |
High airflow |
• |
High humidity |
• |
High temperature |
• |
High water |
• |
Intrusion |
• |
Level converter |
• |
Secondary ADSL low voltage disconnect |
• |
Low voltage disconnect bypass |
• |
Low battery voltage |
• |
Low fuel |
• |
Low humidity |
• |
Low cable pressure |
• |
Low temperature |
• |
Low water |
• |
Miscellaneous |
• |
Open door |
• |
Commercial power failure |
• |
Pump failure |
• |
48V power supply failure |
• |
-139V power converter |
• |
-190V power converter |
• |
Power supply major |
• |
Power supply minor |
• |
Rectifier failure |
• |
Rectifier high voltage |
• |
Rectifier low voltage |
• |
Ringing generator major |
• |
Ringing generator minor |
• |
AC or AC/rectifier power fail ADSL equipment |
• |
AC or AC/rectifier power fail DCL equipment critical site |
• |
AC or AC/rectifier power fail DCL equipment |
• |
Commercial AC fail, site equipped with standby engine |
• |
AC power loss distributed power RT bay |
• |
Retrieve standby engine, commercial AC restored |
• |
Smoke |
• |
High-low temperature |
• |
Toxic gas |
• |
T-repeater shelf |
• |
Ventilation system failure |
OCRDAT |
Date. Optional |
OCRTM |
Time. Optional |
DESC |
Condition description. Optional |
17.5 REPT ALM EQPT
Report Alarm Equipment
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports an alarm condition against an equipment unit or slot.
Category
Equipment
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM EQPT
"<AID>:<NTFCNCDE>,<CONDITION>,<SRVEFF>,
[<OCRDAT>],[<OCRTM>],,:[<DESC>],[<AIDDET>]"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM EQPT
"SLOT-7:MJ,CONTR,NSA,08-01,14-25-59,,:\"CONTROLLER FAILURE\",TCC"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.13 EQPT" section on page 25-27. Equipment AID SLOT-{1-17} |
NTFCNCDE |
Two-letter notification code Parameter type is NOTIF_CODE—two-character notification code associated with an autonomous message |
• |
The condition causing the alarm has cleared |
• |
A critical alarm |
• |
A major alarm |
• |
A minor alarm |
• |
The condition is not alarmed |
• |
The alarm is not reported |
CONDITION |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether or not the problem is reported (that is, whether or not it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
SRVEFF |
The effect on service caused by the standing alarm or condition Parameter type is SERV_EFF—the effect of the alarm on service |
• |
The condition is non-service affecting |
• |
The condition is service affecting |
OCRDAT |
Date. Optional |
OCRTM |
Time. Optional |
DESC |
Condition description. Optional |
AIDDET |
AIDDET uses the same addressing rules as the AID, but specifies AID type and additional details about the entity being managed. Optional Parameter type is EQPT_TYPE—the type of equipment being provisioned into a slot |
• |
Optical Add/Drop Multiplexed (OADM) 1 Band Filter |
• |
Optical Add/Drop Multiplexed (OADM) 1 Channel Filter |
• |
Optical Add/Drop Multiplexed (OADM) 2 Channels Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Bands Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Channels Filter |
• |
The AICI card |
• |
The Alarm Indicator Panel |
• |
Alarm Power |
• |
ASAP Carrier card with four PIM slots |
• |
The Backplane of the NE |
• |
Eight port CE-100T card on ONS 15454 and ONS 15310-CL |
• |
Craft Timing |
• |
The Data Communications Channel |
• |
Optical De/Multiplexed (DMX) 32 Channels |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A three port interface card supporting DS3 facilities |
• |
High Density DS3/EC1 card supporting 48 ports |
• |
A 12 port interface card supporting DS3 ATM facilities |
• |
Cost reduced DS3 |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
An interface card that converts six framed DS-3 network connections to 28x6 or 168 VT1.5s |
• |
A two port interface card supporting 1000 BASE T Ethernet facilities |
• |
A 12 port interface card supporting 100 BASE T Ethernet facilities |
• |
A four port interface card supporting 100 BASE T Ethernet facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
Smart Filler card (ONS 15600) |
• |
The fan tray of the NE |
• |
The fan tray 1 of the NE |
• |
The fan tray 2 of the NE |
• |
A four port G1000 card |
• |
Optical Multiplexer/Demultiplexer with 4 Channels |
• |
ONS 15327 MIC card A |
• |
ONS 15327 MIC card B |
• |
ONS 15327 MIC card |
• |
ONS 15327 MIC card |
• |
Eight port ML-100T card (ONS 15310-CL) |
• |
Optical Multiplexed (MUX) 32 Channels |
• |
10G (4 * 2.5G) Muxponder Card |
• |
An interface card that supports one or more OC-12 (622Mbs) optical facilities |
• |
ONS 15327 OC-12 card |
• |
A four port OC-12 card |
• |
An interface card that supports one intermediate range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one long range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one short range OC-12 (622Mbs) optical facilities |
• |
4 port OC192 card (ONS 15600) |
• |
An interface card that supports one or more OC-192 optical facilities |
• |
An interface card that supports multiple OC-3 (155Mbs) optical facilities |
• |
ONS 15327 OC-3 card |
• |
An interface card that supports four intermediate range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports four short range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports six intermediate range OC-3 (155Mbs) ATM optical fibers |
• |
An OC-3 card which has eight ports over the lower speed slot of the ONS 15454 with XC10G/192 |
• |
An interface card that supports four short range OC-3 (155Mbs) POS optical facilities |
• |
An interface card that supports one or more OC-48 (10Gbs) optical facilities |
• |
ONS 15327 OC48 card |
• |
An interface card that supports one short-range OC-48 (10Gbs) optical facilities that can be provisioned in any I/O slot |
• |
An interface card that supports one short-range OC-48 (2.5Gbs) optical facility |
• |
An interface card that supports one intermediate-range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one long-range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one short-range OC-48 (10Gbs) optical facilities |
• |
16 port OC-48 card (ONS 15600) |
• |
Optical Booster Amplifier |
• |
Optical Preamplifier |
• |
Optical Service Channel (OSC) with Combiner/Separator Module (SCM) |
• |
Optical Service Channel (OSC) Module |
• |
Pluggable interface module with four PPM slots |
• |
Pluggable port module with one port SFP module |
• |
Cross connect card (ONS 15600) |
• |
The Timing Communication and Control card |
• |
Timing and synchronization controller card (ONS 15600) |
• |
10G Multirate Transponder Card |
• |
Multirate 2.5G Unprotected |
• |
Multirate 2.5G Protected |
• |
A Cross-Connect card |
• |
A Cross-Connect card |
• |
ONS 15327 XTC card |
• |
ONS 15327 XTC DS1-14 card |
• |
ONS 15327 XTC DS1-28 card |
• |
ONS 15327 XTC DS1-56 card |
• |
ONS 15327 XTC DS3-3 card |
17.6 REPT ALM SECU
Report Alarm Security
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of an alarmed security event against the NE.
Based on TR-NWT-000835, the AID of the security alarm should be the Connection IDentifier (CID) which is not currently supported.
The COM or UID is an acceptable substitute for the AID.
Note 
The INTRUSION-PSWD condition is the only condition that is reported as a standing condition instead of a transient condition. It defaults to NA and is reported by the REPT EVT SECU message. However, it can be reprovisioned to be reported at a higher severity. If the severity of this alarm is higher than NA, it is reported by the REPT ALM SECU message.
Category
Security
Security
Superuser
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM SECU
"<AID>:<NOTIFCODE>,<SECUALMTYPE>"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM SECU
"COM:CR,INTRUSION-PSWD"
;
Output Parameters
17.7 REPT ALM SYNCN
Report Alarm Synchronization
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports an alarm condition against a synchronization reference.
Category
Synchronization
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT ALM SYNCN
"<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],[<OCRTM>],,:[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
** 100.100 REPT ALM SYNCN
"SYNC-NE:MJ,MAN,SA,08-01,14-25-59,,:\"MANUAL SWITCH\","
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.25 SYNC_REF" section on page 25-40. Identifies a synchronization reference with alarm condition |
NTFCNCDE |
Two-letter notification code Parameter type is NOTIF_CODE—two-character notification code associated with an autonomous message |
• |
The condition causing the alarm has cleared |
• |
A critical alarm |
• |
A major alarm |
• |
A minor alarm |
• |
The condition is not alarmed |
• |
The alarm is not reported |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether or not the problem is reported (that is, whether or not it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" or a list of conditions |
SRVEFF |
The effect on service caused by the standing alarm or condition Parameter type is SERV_EFF—the effect of the alarm on service |
• |
The condition is non-service affecting |
• |
The condition is service affecting |
OCRDAT |
Date. Optional |
OCRTM |
Time. Optional |
DESC |
Condition description. Optional |
17.8 REPT DBCHG
Report Database Change Message
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports any changes on the NE that result from:
•TL1 provisioning commands or their GUI equivalents containing the verbs: ALW, DLT, ED, ENT, INH, INIT, OPR, RLS, SET, and SW (for example, DLT-EQPT, ENT-CRS-STS1)
•External event such as a board insertion
•When secondary state is changed from AINS state to any other state, no REPT DBCHG messages are generated
Note•The REPT DBCHG is turned off by default. To turn REPT DBCHG on, you must issue the ALW-MSG-DBCHG command.
•REPT DBCHG messages will be generated every time a roll is performed. A cross-connect delete and add REPT DBCHG message will not be sent every time a roll is performed; instead a REPT DBCHG message on the roll will be sent.
Category
Log
Security
Retrieve
Related Commands
ALW-MSG-DBCHG |
INH-MSG-DBCHG |
RTRV-LOG |
Output Format
SID DATE TIME
A ATAG REPT DBCHG
"TIME=<TIME>,DATE=<DATE>,[SOURCE=<SOURCE>],[USERID=<USERID>],
DBCHGSEQ=<DBCHGSEQ>:<COMMAND>:[<AID>]:::[<PSTPSTQ>,],<SST>"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100 REPT DBCHG
"TIME=14-35-46,DATE=99-07-28,SOURCE=123,USERID=CISCO15,DBCHGSEQ=456:
ENT-CRS-VT1:VT1-4-1-2-6-4:::PST-PSTQ,SST"
;
Output Parameters
17.9 REPT EVT <MOD2ALM>
Report Event (1GFC, 1GFICON, 2GFC, 2GFICON, CLNT, DS1, E100, E1000, E3, E4, EC1, FSTE, G1000, GFPOS, GIGE, OC12, OC192, OC3, OC48, OCH, OMS, OTS, POS, STS1, STS12C, STS18C, STS192C, STS24C, STS36C, STS3C, STS48C, STS6C, STS9C, T1, T3, UDCDCC, UDCF, VC12, VC3, VCG, VT1, VT2, WLEN)
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of a non-alarmed event. Beginning with R5.0,
REPT EVT <MOD2ALM> can report the RMON-managed threshold crossing alarm.
See Table 27-1 on page 27-1 for supported modifiers by platform.
Category
Fault
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT <MOD2ALM>
"<AID>:<CONDTYPE>,[<CONDEFF>],,,[<LOCN>],,[<MONVAL>],[<THLEV>],
[<TMPER>]:[<DESC>],[<AIDDET>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT 1GFC
"FAC-5-1:WKSWPR,TC,,,FEND,,12,13,15-MIN:\"WORKING SWITCH TOPROTECTION\",
OC48"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.1 ALL" section on page 25-1 |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 node, whether the problem is reported (that is, whether it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
CONDEFF |
The effect of the event on the condition of the NE Parameter type is COND_EFF—the state of the condition upon the affected unit |
• |
Standing condition cleared |
• |
Standing condition raised |
• |
Transient condition |
LOCN |
Location associated with a particular command in reference to the entity identified by the AID Parameter type is LOCATION—the location where the action is to take place |
• |
Action occurs on the Far End of the facility |
• |
Action occurs on the Near End of the facility |
MONVAL |
Monitored value. Value to which the register identified by MONTYPE will be initialized or the measured value of a monitored parameter. The value is in the form of numeric counts or rates. Float. Optional |
THLEV |
Threshold level. Float. Optional |
TMPER |
Accumulation time period for performance counters. Optional Parameter type is TMPER—accumulation time period for the performance management center |
• |
Performance parameter accumulation interval length; every 24-hours. For SONET PM data only one day of history data is available. For RMON managed PM data seven days of history data are available. |
• |
Performance parameter accumulation interval length; every 1 hour. This is only applicable to RMON managed PM data. There are 24 hours of history data available. |
• |
Performance parameter accumulation interval length; every 1 minute. This is only applicable to RMON managed PM data. There are 60 minutes of history available. |
• |
Performance parameter accumulation interval length; every 15 minutes. There are 32 15-MIN buckets of history data available for this accumulation interval length. |
• |
Performance parameter accumulation interval length; starting from the last time the counters were cleared. This is only applicable to RMON managed PMs. |
DESC |
Condition description. Optional |
AIDDET |
AIDDET uses the same addressing rules as the AID, but specifies AID type and additional details about the entity being managed. Optional Parameter type is EQPT_TYPE—the type of equipment being provisioned into a slot |
• |
Optical Add/Drop Multiplexed (OADM) 1 Band Filter |
• |
Optical Add/Drop Multiplexed (OADM) 1 Channel Filter |
• |
Optical Add/Drop Multiplexed (OADM) 2 Channels Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Bands Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Channels Filter |
• |
The AICI card |
• |
The Alarm Indicator Panel |
• |
Alarm Power |
• |
ASAP Carrier card with four PIM slots |
• |
The Backplane of the NE |
• |
Eight port CE-100T card on ONS 15454 and ONS 15310-CL |
• |
Craft Timing |
• |
The Data Communications Channel |
• |
Optical De/Multiplexed (DMX) 32 Channels |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A three port interface card supporting DS3 facilities |
• |
High Density DS3/EC1 card supporting 48 ports |
• |
A 12 port interface card supporting DS3 ATM facilities |
• |
Cost reduced DS3 |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
An interface card that converts six framed DS-3 network connections to 28x6 or 168 VT1.5s |
• |
A two port interface card supporting 1000 BASE T Ethernet facilities |
• |
A 12 port interface card supporting 100 BASE T Ethernet facilities |
• |
A four port interface card supporting 100 BASE T Ethernet facilities. |
• |
A 12 port interface card supporting EC1 facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
Smart Filler card (ONS 15600) |
• |
The fan tray of the NE |
• |
The fan tray 1 of the NE |
• |
The fan tray 2 of the NE |
• |
A four port G1000 card |
• |
Optical Multiplexer/Demultiplexer with 4 Channels |
• |
ONS 15327 MIC card A |
• |
ONS 15327 MIC card B |
• |
ONS 15327 MIC card |
• |
ONS 15327 MIC card |
• |
Eight port 100T card on ONS 15310-CL |
• |
Optical Multiplexed (MUX) 32 Channels |
• |
10G (4 * 2.5G) Muxponder Card |
• |
An interface card that supports one or more OC-12 (622Mbps) optical facilities |
• |
OC-12 card (ONS 15327) |
• |
A four port OC12 card |
• |
An interface card that supports one intermediate range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one long range OC-12 (622Mbps) optical facilities |
• |
An interface card that supports one short range OC-12 (622Mbps) optical facilities |
• |
A four port OC192 card (ONS 15600) |
• |
An interface card that supports one or more OC-192 optical facilities |
• |
An interface card that supports multiple OC-3 (155Mbps) optical facilities |
• |
ONS 15327 OC-3 card |
• |
An interface card that supports four intermediate range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports four short range OC-3 (155Mbps) optical facilities |
• |
An interface card that supports six intermediate range OC-3 (155Mbs) ATM optical fibers |
• |
An OC-3 card which has 8 ports over the lower speed slot of the ONS 15454 with XC10G/192 |
• |
An interface card that supports four short range OC-3 (155Mbps) POS optical facilities |
• |
An interface card that supports one or more OC-48 (10Gbps) optical facilities |
• |
OC-48 card (ONS 15327) |
• |
An interface card that supports one short range OC-48 (10Gbps) optical facilities that can be provisioned in any I/O slot |
• |
An interface card that supports one short range OC-48 (2.5Gbps) optical facility |
• |
An interface card that supports one intermediate range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one long range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one short range OC-48 (10Gbs) optical facilities |
• |
16 port OC-48 card (ONS 15600) |
• |
Optical Booster Amplifier |
• |
Optical Preamplifier |
• |
Optical Service Channel (OSC) with Combiner/Separator Module (SCM) |
• |
Optical Service Channel (OSC) Module |
• |
Pluggable interface module with four PPM slots |
• |
Pluggable port module with 1 port SFP module |
• |
Cross connect card (ONS 15600) |
• |
The Timing Communication and Control card |
• |
Timing and synchronization controller card (ONS 15600) |
• |
10G Multirate Transponder Card |
• |
Multirate 2.5G Unprotected |
• |
Multirate 2.5G Protected |
• |
A Cross-Connect card |
• |
A Cross-Connect card |
• |
ONS 15327 XTC card |
• |
ONS 15327 XTC DS1-14 card |
• |
ONS 15327 XTC DS1-28 card |
• |
ONS 15327 XTC DS1-56 card |
• |
ONS 15327 XTC DS3-3 card |
17.10 REPT EVT BITS
Report Event Building Integrated Timing Supply
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports a non-alarmed event against a BITS facility.
Category
Synchronization
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
** ATAG REPT EVT BITS
"<AID>:<CONDTYPE>,[<CONDEFF>],,,,,,,:[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT ALM BITS
"BITS-1:SSM-STU,TC,,,,,,,:\"SYNCHRONIZED - TRACEABILITY UNKNOWN\""
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.5 BITS" section on page 25-13 |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 node, whether the problem is reported (that is, whether it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
CONDEFF |
The effect of the event on the condition of the NE Parameter type is COND_EFF—the state of the condition upon the affected unit |
• |
Standing condition cleared |
• |
Standing condition raised |
• |
Transient condition |
DESC |
Condition description. Optional |
17.11 REPT EVT COM
Report Event Common
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports a non-alarmed event against an NE when there is no AID associated with it.
Category
Fault
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT COM
"[<AID>]:<CONDTYPE>,[<CONDEFF>],,,,,,,:[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT COM
"COM:CLDRESTART,TC,,,,,,,:\"COLD RESTART\","
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier. Identifies the entity to which the command pertains. String. Optional |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether or not the problem is reported (that is, whether or not it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
CONDEFF |
The effect of the event on the condition of the NE Parameter type is COND_EFF—the state of the condition upon the affected unit |
• |
Standing condition cleared |
• |
Standing condition raised |
• |
Transient condition |
DESC |
Condition description. Optional |
17.12 REPT EVT ENV
Report Event Environment
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of a non-alarmed event against an environment alarm input.
Category
Environment
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT ENV
"<AID>:<ALMTYPE>,[<CONDEFF>],,,,,,,:[<DESC>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT ENV
"ENV-IN-2:OPENDR,TC,,,,,,,:\"OPEN DOOR\""
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.12 ENV" section on page 25-26. Identifies an environmental input |
ALMTYPE |
Abbreviated code identifying the alarm Parameter type is ENV_ALM—environmental alarm types |
• |
Air compressor failure |
• |
Air conditioning failure |
• |
Air dryer failure |
• |
Battery discharging |
• |
Battery failure |
• |
Cooling fan failure |
• |
Centralized power major failure |
• |
Centralized power minor failure |
• |
Engine failure |
• |
Engine operating |
• |
Standby engine transfer |
• |
Explosive gas |
• |
Fire detector failure |
• |
Fire |
• |
Flood |
• |
Fuel leak |
• |
Fuse failure |
• |
Explosive gas, toxic gas, ventilation fail or gas monitor fail |
• |
CEV hatch fail |
• |
Generator failure |
• |
High airflow |
• |
High humidity |
• |
High temperature |
• |
High water |
• |
Intrusion |
• |
Level converter |
• |
Secondary ADSL low voltage disconnect |
• |
Low voltage disconnect bypass |
• |
Low battery voltage |
• |
Low fuel |
• |
Low humidity |
• |
Low cable pressure |
• |
Low temperature |
• |
Low water |
• |
Miscellaneous |
• |
Open door |
• |
Commercial power failure |
• |
Pump failure |
• |
48V power supply failure |
• |
-139V power converter |
• |
-190V power converter |
• |
Power supply major |
• |
Power supply minor |
• |
Rectifier failure |
• |
Rectifier high voltage |
• |
Rectifier low voltage |
• |
Ringing generator major |
• |
Ringing generator minor |
• |
AC or AC/rectifier power fail ADSL equipment |
• |
AC or AC/rectifier power fail DCL equipment critical site |
• |
AC or AC/rectifier power fail DCL equipment |
• |
Commercial AC fail, site equipped with standby engine |
• |
AC power loss distributed power RT bay |
• |
Retrieve standby engine, commercial AC restored |
• |
Smoke |
• |
High-low temperature |
• |
Toxic gas |
• |
T-repeater shelf |
• |
Ventilation system failure |
CONDEFF |
The effect of the event on the condition of the NE Parameter type is COND_EFF—the state of the condition upon the affected unit |
• |
Standing condition cleared |
• |
Standing condition raised |
• |
Transient condition |
DESC |
Condition description. Optional |
17.13 REPT EVT EQPT
Report Event Equipment
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of a non-alarmed event against an equipment unit or slot.
Category
Equipment
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT EQPT
"<AID>:<CONDTYPE>,[<CONDEFF>],,,,,,,:[<DESC>],[<AIDDET>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT EQPT
"SLOT-7:PLUGIN,TC,,,,,,,:\"EQUIPMENT PLUG-IN\",TCC"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.13 EQPT" section on page 25-27. Equipment AID SLOT-{1-17} |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether or not the problem is reported (that is, whether or not it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
CONDEFF |
The effect of the event on the condition of the NE Parameter type is COND_EFF—the state of the condition upon the affected unit |
• |
Standing condition cleared |
• |
Standing condition raised |
• |
Transient condition |
DESC |
Condition description. Optional |
AIDDET |
AIDDET uses the same addressing rules as the AID, but specifies AID type and additional details about the entity being managed. Optional Parameter type is EQPT_TYPE—the type of equipment being provisioned into a slot |
• |
Optical Add/Drop Multiplexed (OADM) 1 Band Filter |
• |
Optical Add/Drop Multiplexed (OADM) 1 Channel Filter |
• |
Optical Add/Drop Multiplexed (OADM) 2 Channels Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Bands Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Channels Filter |
• |
The AICI card |
• |
The Alarm Indicator Panel |
• |
Alarm Power |
• |
ASAP Carrier card with four PIM slots |
• |
The Backplane of the NE |
• |
Eight port CE-100T card on ONS 15454 and ONS 15310-CL |
• |
Craft Timing |
• |
The Data Communications Channel |
• |
Optical De/Multiplexed (DMX) 32 Channels |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A three port interface card supporting DS3 facilities |
• |
High Density DS3/EC1 card supporting 48 ports |
• |
A 12 port interface card supporting DS3 ATM facilities |
• |
Cost reduced DS3 |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
An interface card that converts six framed DS-3 network connections to 28x6 or 168 VT1.5s |
• |
A two port interface card supporting 1000 Base T Ethernet facilities |
• |
A 12 port interface card supporting 100 Base T Ethernet facilities |
• |
A four port interface card supporting 100 Base T Ethernet facilities. |
• |
A 12 port interface card supporting EC1 facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
Smart Filler card (ONS 15600) |
• |
The fan tray of the NE |
• |
The fan tray 1 of the NE |
• |
The fan tray 2 of the NE |
• |
A four port G1000 card |
• |
Optical Multiplexer/Demultiplexer with 4 Channels |
• |
ONS 15327 MIC card A |
• |
ONS 15327 MIC card B |
• |
ONS 15327 MIC card |
• |
ONS 15327 MIC card |
• |
Eight port 100T card on ONS 15310-CL |
• |
Optical Multiplexed (MUX) 32 Channels |
• |
10G (4 * 2.5G) Muxponder Card |
• |
An interface card that supports one or more OC-12 (622Mbs) optical facilities |
• |
ONS 15327 OC-12 card |
• |
A four port OC-12 card |
• |
An interface card that supports one intermediate range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one long range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one short range OC-12 (622Mbs) optical facilities |
• |
Four port OC192 card (ONS 15600) |
• |
An interface card that supports one or more OC-192 optical facilities |
• |
An interface card that supports multiple OC-3 (155Mbs) optical facilities |
• |
ONS 15327 OC-3 card |
• |
An interface card that supports four intermediate range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports four short range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports six intermediate range OC-3 (155Mbs) ATM optical fibers |
• |
An OC-3 card which has eight ports over the lower speed slot of the ONS 15454 with XC10G/192 |
• |
An interface card that supports four short range OC-3 (155Mbs) POS optical facilities |
• |
An interface card that supports one or more OC-48 (10Gbs) optical facilities |
• |
ONS 15327 OC-48 card |
• |
An interface card that supports one short range OC-48 (10Gbs) optical facilities that can be provisioned in any I/O slot |
• |
An interface card that supports one short range OC-48 (2.5Gbs) optical facility |
• |
An interface card that supports one intermediate range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one long range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one short range OC-48 (10Gbs) optical facilities |
• |
16 port OC48 card (ONS 15600) |
• |
Optical Booster Amplifier |
• |
Optical Preamplifier |
• |
Optical Service Channel (OSC) with Combiner/Separator Module (SCM) |
• |
Optical Service Channel (OSC) Module |
• |
Pluggable interface module with 4 PPM slots |
• |
Pluggable port module with 1 port SFP module |
• |
Cross connect card (ONS 15600) |
• |
The Timing Communication and Control card |
• |
Timing and synchronization controller card (ONS 15600) |
• |
10G Multirate Transponder Card |
• |
Multirate 2.5G Unprotected |
• |
Multirate 2.5G Protected |
• |
A Cross-Connect card |
• |
A Cross-Connect card |
• |
ONS 15327 XTC card |
• |
ONS 15327 XTC DS1-14 card |
• |
ONS 15327 XTC DS1-28 card |
• |
ONS 15327 XTC DS1-56 card |
• |
ONS 15327 XTC DS3-3 card |
17.14 REPT EVT FXFR
Report Event Software Download
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15310-CL
Reports the FTP software download status of the start, completion, and completed percentage.
Note The FXFR_RSLT is only sent when the FXFR_STATUS is COMPLD.
Note The BYTES_XFRD is only sent when the FXFR_STATUS is IP or COMPLD.
Category
File Transfer
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT FXFR
"<FILENAME>,<FXFR_STATUS>,[<FXFR_RSLT>],[<BYTES_XFRD>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT FXFR
"NEW.PKG,COMPLD,SUCCESS,21215147"
;
Output Parameters
17.15 REPT EVT IOSCFG
Report Event Internet Operating System Configuration File
Usage Guidelines
Cisco ONS 15454
Reports the status of copying the Cisco IOS configuration file when the COPY-IOSCFG command is issued.
Note You can identify if this message is caused by a Cisco IOS config file downloading/uploading/merging by looking at the SRC and DEST field in the message. See the "8.1 COPY-IOSCFG" section on page 8-1 for more details.
Note There is no success/failure in the message to indicate the success or failure of the merge process when merging the startup Cisco IOS config file to the running config file.
Category
File Transfer
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT IOSCFG
"<AID>:<SRC>,<DEST>,<STATUS>,[<RESULT>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT IOSCFG
"SLOT-1:STARTUP,IOS-CONFIG-FILE-IN-NETWORK,COMPLD,SUCCESS"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.13 EQPT" section on page 25-27. Slot AID for the equipment |
SRC |
Source access identifier. Specifies where the Cisco IOS config file is copied from. String |
DEST |
Destination. Specifies where the Cisco IOS config file is copied to. String |
STATUS |
The status of COPY-IOSCFG: Start, IP, or COMPLD Parameter type is TX_STATUS—status of the file transfer |
• |
The file transmission is completed |
• |
The file transmission is in progress |
• |
The file transmission is started |
RESULT |
The result of the file transfer: Success or Failure. Optional Parameter type is TX_RSLT—result of the file transfer |
• |
A failed result |
• |
A successful result |
17.16 REPT EVT SECU
Report Event Security
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of a non-alarmed security event against the NE.
Based on TR-NWT-000835 in TR-NWT-000835 and the AID of the security alarm should be the Connection Identifier (CID) which is not supported in this release. The COM or UID is an acceptable substitute for the AID here. CIDs will be supported in a future release.
For the rule of single failure, single message/alarm, the security alarm will not be reported as
REPT ALM COM, because it is reported as REPT ALM SECU.
Because the NE sends this security message as a transient message, to make all TL1 autonomous messages consistent, the TL1 agent reports the security message into REPT EVT SECU.
This message is inhibited by default. A superuser will have to issue the ALW-MSG-SECU to see this message.
Category
Security
Security
Superuser
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT SECU
"<AID>:<DNFIELD>,[<CONDEFF>],,,,,,,:<SECURITY>:<DNFIELD1>"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT SECU
"COM:LOGIN-FAILURE-PSWD,TC,,,,,,,:\"SECURITY:
INVALID LOGIN - PASSWORD - SEE AUDIT LOG\""
;
Output Parameters
17.17 REPT EVT SESSION
Report Event Session
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports a non-alarmed event related to establishing a session with the NE.
Note•The WARN field might contain different information depending on the type of session-related event.
•If the password aging feature has not been enabled (or the feature is enabled but the password is not close to expiring):
/*USER <UID> LOGGED IN <IP/SERIAL PORT*/
•If the forced password feature is enforced and the user is logging in for the first time (or the password has expired):
/*PLEASE CHANGE PASSWORD BEFORE CONTINUING*/
•If a session is terminated for any reason (except a user timeout), the reason for the session termination is indicated in the warning (<WARN>).
Category
Security
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT SESSION
"<AID>:<EXP>,<PCN>"
"<WARN>"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT SESSION
"TCCP:YES,5-DAY"
"/* USER TERRI LOGGED IN TO TCCP */"
;
Output Parameters
17.18 REPT EVT SYNCN
Report Event Synchronization
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of a non-alarmed event against a synchronization entity.
Category
Synchronization
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT EVT SYNCN
"<AID>:<CONDTYPE>,[<CONDEFF>],,,,,,,:[<DESC>],[<AIDDET>]"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT EVT SYNCN
"SYNC-NE:SWTOINT,SC,,,,,,,:\"SWITCH TO INTERNAL CLOCK\",TCC"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.25 SYNC_REF" section on page 25-40. Identifies a synchronization reference with alarm condition |
CONDTYPE |
Condition type for an alarm or a reported event Parameter type is CONDITION—any problem detected on an ONS 15454, ONS 15327, ONS 15310-CL, or ONS 15600 shelf, whether or not the problem is reported (that is, whether or not it generates a trouble notification). Reported conditions include alarms, Not-Alarmed conditions (NA), and Not-Reported (NR) conditions. See Chapter 26, "Conditions" for a list of conditions |
CONDEFF |
The effect of the event on the condition of the NE Parameter type is COND_EFF—the state of the condition upon the affected unit |
• |
Standing condition cleared |
• |
Standing condition raised |
• |
Transient condition |
DESC |
Condition description. Optional |
AIDDET |
AIDDET uses the same addressing rules as the AID, but specifies AID type and additional details about the entity being managed. Optional Parameter type is EQPT_TYPE—the type of equipment being provisioned into a slot |
• |
Optical Add/Drop Multiplexed (OADM) 1 Band Filter |
• |
Optical Add/Drop Multiplexed (OADM) 1 Channel Filter |
• |
Optical Add/Drop Multiplexed (OADM) 2 Channels Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Bands Filter |
• |
Optical Add/Drop Multiplexed (OADM) 4 Channels Filter |
• |
The AICI card |
• |
The Alarm Indicator Panel |
• |
Alarm Power |
• |
ASAP Carrier card with four PIM slots |
• |
The Backplane of the NE |
• |
Eight port CE-100T card on ONS 15454 and ONS 15310-CL |
• |
Craft Timing |
• |
The Data Communications Channel |
• |
Optical De/Multiplexed (DMX) 32 Channels |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 14 port interface card supporting DS1 facilities |
• |
A 12 port interface card supporting DS3 facilities |
• |
A three port interface card supporting DS3 facilities |
• |
High Density DS3/EC1 card supporting 48 ports |
• |
A 12 port interface card supporting DS3 ATM facilities |
• |
Cost reduced DS-3 |
• |
A 12 port DS-3 enhancement interface card supporting DS3E facilities |
• |
A 12 port interface card supporting DS-3 facilities |
• |
A 12 port DS3 enhancement interface card supporting DS3E facilities |
• |
An interface card that converts six framed DS-3 network connections to 28x6 or 168 VT1.5s |
• |
A two port interface card supporting 1000 BASE T Ethernet facilities |
• |
A 12 port interface card supporting 100 BASE T Ethernet facilities |
• |
A four port interface card supporting 100 BASE T Ethernet facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
A 12 port interface card supporting EC1 facilities |
• |
Smart Filler card (ONS 15600) |
• |
The fan tray of the NE |
• |
The fan tray 1 of the NE |
• |
The fan tray 2 of the NE |
• |
A four port G1000 card |
• |
Optical Multiplexer/Demultiplexer with 4 Channels |
• |
ONS 15327 MIC card A |
• |
ONS 15327 MIC card B |
• |
ONS 15327 MIC card |
• |
ONS 15327 MIC card |
• |
Eight port ML-100T card on ONS 15310-CL |
• |
Optical Multiplexed (MUX) 32 Channels |
• |
10G (4 * 2.5G) Muxponder Card |
• |
An interface card that supports one or more OC-12 (622Mbs) optical facilities |
• |
ONS 15327 OC12 card |
• |
A four port OC12 card |
• |
An interface card that supports one intermediate range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one long range OC-12 (622Mbs) optical facilities |
• |
An interface card that supports one short range OC-12 (622Mbs) optical facilities |
• |
Four port OC-192 card (ONS 15600) |
• |
An interface card that supports one or more OC-192 optical facilities |
• |
An interface card that supports multiple OC-3 (155Mbs) optical facilities |
• |
ONS 15327 OC-3 card |
• |
An interface card that supports four intermediate range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports four short range OC-3 (155Mbs) optical facilities |
• |
An interface card that supports six intermediate range OC-3 (155Mbs) ATM optical fibers |
• |
An OC3 card which has 8 ports over the lower speed slot of the ONS 15454 with XC10G/192 |
• |
An interface card that supports four short range OC-3 (155Mbs) POS optical facilities |
• |
An interface card that supports one or more OC-48 (10Gbs) optical facilities |
• |
ONS 15327 OC-48 card |
• |
An interface card that supports one short range OC-48 (10Gbs) optical facilities that can be provisioned in any I/O slot |
• |
An interface card that supports one short-range OC-48 (2.5Gbs) optical facility |
• |
An interface card that supports one intermediate-range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one long-range OC-48 (10Gbs) optical facility |
• |
An interface card that supports one short-range OC-48 (10Gbs) optical facilities |
• |
16 port OC48 card (ONS 15600) |
• |
Optical Booster Amplifier |
• |
Optical Preamplifier |
• |
Optical Service Channel (OSC) with Combiner/Separator Module (SCM) |
• |
Optical Service Channel (OSC) Module |
• |
Pluggable interface module with four PPM slots |
• |
Pluggable port module with one port SFP module |
• |
Cross connect card (ONS 15600) |
• |
The Timing Communication and Control card |
• |
Timing and synchronization controller card (ONS 15600) |
• |
10G Multirate Transponder Card |
• |
Multirate 2.5G Unprotected |
• |
Multirate 2.5G Protected |
• |
A Cross-Connect card |
• |
A Cross-Connect card |
• |
ONS 15327 XTC card |
• |
ONS 15327 XTC DS1-14 card |
• |
ONS 15327 XTC DS1-28 card |
• |
ONS 15327 XTC DS1-56 card |
• |
ONS 15327 XTC DS3-3 card |
17.19 REPT PM <MOD2>
Report Performance Monitoring (10GFC, 10GIGE, 1GFC, 1GFICON, 2GFC, 2GFICON, CLNT, D1VIDEO, DS1, DV6000, E1, E3, E4, EC1, ESCON, ETRCLO, FSTE, G1000, GFPOS, GIGE, HDTV, ISC1, OC12, OC192, OC3, OC48, OCH, OMS, OTS, POS, STS1, STS12C, STS18C, STS192C, STS24C, STS36C, STS3C, STS48C, STS6C, STS9C, T1, T3, VC12, VC3, VT1, VT2)
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports autonomous monitoring statistics as a result of the schedule created by SCHED-PMREPT.
See Table 27-1 on page 27-1 for supported modifiers by platform.
Category
Performance
Security
Retrieve
Related Commands
Output Format
SID DATE TIME
A ATAG REPT PM <MOD2>
"<AID>:<MONTYPE>,<MONVAL>,<VLDTY>,<LOCN>,<DIRN>,<TMPER>,<MONDAT>,
<MONTM>"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100 REPT PM 10GFC
"FAC-3-1:CVL,10,PRTL,NEND,BTH,15-MIN,05-25,14-46"
;
Output Parameters
|
|
|
|---|---|
AID |
Access identifier from the "25.1.1 ALL" section on page 25-1 |
MONTYPE |
Monitored type Parameter type is ALL_MONTYPE—monitoring type list |
• |
Alarm Indication Signal Seconds—Path |
• |
All possible values |
• |
OTN—Background Block Errors—Path Monitor Point |
• |
OTN—Background Block Errors—Section Monitor Point |
• |
OTN—Background Block Error Ratio—Path Monitor Point expressed as 1/10th of a percentage. |
• |
OTN—Background Block Error Ratio—Section Monitor Point expressed as 1/10th of a percentage. |
• |
FEC—Bit Errors Corrected |
• |
8B10B—Code Group Violations |
• |
Controlled Slip Seconds—Path (DSXM-12 FDL/T1.403 PM count) |
• |
Coding Violations—CP-Bit Path |
• |
Coding Violations—Line |
• |
Coding Violations—Path |
• |
Coding Violations—Section |
• |
Coding Violations—Section |
• |
8B10B—Data Code Groups |
• |
Errored Second Type A-Path (DS3XM-12 DS1 PM count) |
• |
Errored Second Type B-Path (DS3XM-12 DS1 PM count) |
• |
Errored Seconds—CP—Bit Path |
• |
Errored Seconds—Line |
• |
Errored Second -Network Path (DS3XM-12 DS1 PM count) |
• |
Errored Seconds—Path |
• |
OTN—Errored Seconds—Path Monitor Point |
• |
OTN—Errored Seconds—Section Monitor Point |
• |
Errored Second—Ratio |
• |
Errored Seconds Ratio—Path monitor Point expressed as 1/10th of a percentage |
• |
Errored Seconds Ratio—Section monitor Point expressed as 1/10th of a percentage |
• |
Errored Seconds—Section |
• |
Errored Seconds—VT Path |
• |
The total number of good packets received that were directed to a multicast address |
• |
Number of transmit packets that are collisions |
• |
The total number of packets received that have a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets |
• |
Number of received frames dropped at the port level |
• |
The total number of packets received that were less than 64 octets |
• |
The total number of packets received that are longer than 1518 octets |
• |
The total number of octets of data |
• |
The total number of packets received that are longer than 1518 octets |
• |
The total number of packets (including bad packets, broadcast packets, and multicast packets) received |
• |
The total number of packets received that are less than 64 octets |
• |
Failure Count—Line |
• |
OTN—Failure Count—Path Monitor Point |
• |
OTN—Failure Count—Section Monitor Point |
• |
Availability Ratio |
• |
High-Order Path Background Block Error |
• |
High-Order Path Background Block Error Ratio |
• |
High-Order Path Errored Block |
• |
High-Order Path Errored Second |
• |
High-Order Path Errored Seconds - A |
• |
High-Order Path Errored Seconds - B |
• |
High-Order Path Errored Second Ratio |
• |
High-Order Path Failure Count |
• |
High-Order Path Negative Pointer Justification Count |
• |
High-Order Path, Negative Pointer Justification Count |
• |
Outage Intensity |
• |
High-Order Path Pointer Justification Count Difference |
• |
High-Order Path Pointer Justification Count |
• |
High-Order Path Pointer Justification Count Seconds |
• |
High-Order Path Positive Pointer Justification Count |
• |
High-Order Path, Positive Pointer Justification Count |
• |
The number of SEP events in available time |
• |
High-Order Path Severely Errored Seconds |
• |
High-Order Path Severely Errored Second Ratio |
• |
High-Order Path Unavailable Seconds |
• |
Number of broadcast packets received since the last counter reset |
• |
The number of inbound packets |
• |
Receive Error Byte |
• |
The number of inbound packets (or transmission units) that contained errors |
• |
Receive Framing Error |
• |
Receive Interpkt Junk |
• |
Number of multicast packets received since the last counter reset |
• |
Number of bytes transmitted since the last counter reset |
• |
Number of unicast packets received since the last counter reset |
• |
Number of broadcast packets transmitted |
• |
The number of outbound packets |
• |
The number of outbound packets (or transmission units) that could not be transmitted because of errors |
• |
Number of multicast packets transmitted |
• |
Received payload CRC errors |
• |
Number of unicast packets transmitted |
• |
8B10B- Idle Ordered Sets |
• |
Invalid Packet Count |
• |
Average Laser Bias current in uA |
• |
Maximum Laser Bias current in uA |
• |
Minimum Laser Bias current in uA |
• |
Normalized Laser Bias Current for OC3-8 |
• |
Laser Bias Current |
• |
Laser Bias Current |
• |
Loss of Signal Seconds—Line |
• |
Low-Order Path Background Block Error |
• |
Low-Order Path Background Block Error Ratio |
• |
Low-Order Path Errored Block |
• |
Low-Order Path Errored Second |
• |
Low-Order Path Errored Seconds-A |
• |
Low-Order Path Errored Seconds-B |
• |
Low-Order Path Errored Second Ratio |
• |
Low-Order Path Failure Count |
• |
Low-Order Negative Pointer Justification Count, Detected |
• |
Low Order Negative Pointer Justification Count, Generated |
• |
Low-Order Positive Pointer Justification Count, Detected |
• |
Low-Order positive Pointer Justification Count, Generated |
• |
Low-Order Path Severely Errored Period |
• |
Low-Order Path Severely Errored Period Intensity |
• |
Low-Order Path Severely Errored |
• |
Low-Order Path Unavailable Seconds |
• |
Protection switch count |
• |
Protection switch duration |
• |
8B10B—Non Idle Ordered Sets |
• |
PPJC-PDET:Negative Pointer Justification |
• |
PPJC-PGEN:Negative Pointer Justification |
• |
Average Receive Power in 1/10 uW |
• |
Maximum Receive Power in 1/10 uW |
• |
Minimum Receive Power in 1/10 uW |
• |
Normalized Optical Receive Power for OC3-8 |
• |
Maximum value for OPRN |
• |
Minimum value for OPRN |
• |
Average Transmit Power in 1/10 uW |
• |
Maximum Transmit Power in 1/10 uW |
• |
Minimum Transmit Power in 1/10uW |
• |
Normalized value for Optical Power Transmitted for the OC3-8 card |
• |
Maximum value for OPTN |
• |
Minimum value for OPTN |
• |
Optical Power—Average Interval Value in 1/10th of dBm |
• |
Optical Power—Maximum Interval Value in 1/10th of dBm |
• |
Optical Power—Minimum Interval Value in 1/10th of dBm |
• |
PPJC-PDET:Positive Pointer Justification |
• |
PPJC-PGEN:Positive Pointer Justification |
• |
Protection Switching Count |
• |
Protection Switching Count—Ring |
• |
Protection Switching Count—Span |
• |
Protection Switching Count—Working |
• |
Protection Switching Duration |
• |
Protection Switching Duration—Ring |
• |
Protection Switching Duration—Span |
• |
Protection Switching Duration—Working |
• |
Severely Errored Framing/AIS Second—CP-Bit Path |
• |
Severely Errored Framing/AIS Seconds Path |
• |
Severely Errored Framing Seconds |
• |
Severely Errored Framing Seconds—Path (DS3XM-12 DS1 PM count) |
• |
Severely Errored Second—CP-Bit Path |
• |
Severely Errored Second—Line |
• |
Severely Errored Second - Network Path (DS3XM-12 DS1 PM count) |
• |
Severely Errored Second—Path |
• |
OTN—Severely Errored Second—Path |
• |
OTN—Severely Errored Second Ratio—Path Monitor Point expressed as 1/10th of a percentage |
• |
OTN—Severely Errored Second Ratio—Section Monitor Point expressed as 1/10th of a percentage |
• |
Severely Errored Second—Section |
• |
OTN—Severely Errored Second—Section Monitor Point |
• |
Severely Errored Second—VT Path |
• |
Unavailable Second—CP-Bit Path |
• |
Unavailable Second—Line |
• |
Unavailable Second - Network Path (DS3XM-12 DS1 PM count) |
• |
Unavailable Second—Path |
• |
OTN—Unavailable Second—Path Monitor Point |
• |
OTN—Unavailable Second—Section Monitor Point |
• |
Unavailable Second—VT Path |
• |
FEC—Uncorrectable Words |
• |
Valid Packet Count |
MONVAL |
The value to which the register identified by MONTYPE is to be initialized to or the measured value of a monitored parameter. The value is in the form of numeric counts or rates. String |
VLDTY |
Indicates whether the information for the specified time period was accumulated over the entire time period or a portion of that time period. Validity indicator for the reported PM data Parameter type is VALIDITY—response validity |
• |
Complete response |
• |
Partial response |
LOCN |
Location associated with a particular command in reference to the entity identified by the AID Parameter type is LOCATION—the location where the action is to take place |
• |
Action occurs on the Far End of the facility |
• |
Action occurs on the Near End of the facility |
DIRN |
Direction relative to the entity identified by the AID. Direction of PM relative to the entity identified by the AID Parameter type is DIRECTION—transmit and receive directions |
• |
Both transmit and receive directions |
• |
Receive direction only |
• |
Transmit direction only |
TMPER |
Accumulation time period for performance counters Parameter type is TMPER—accumulation time period for the performance management center |
• |
Performance parameter accumulation interval length; every 24-hours. For SONET PM data only one day of history data is available. For RMON managed PM data seven days of history data are available |
• |
Performance parameter accumulation interval length; every 1 hour. This is only applicable to RMON managed PM data. There are 24 hours of history data available |
• |
Performance parameter accumulation interval length; every 1 minute. This is only applicable to RMON managed PM data. There are 60 minutes of history available |
• |
Performance parameter accumulation interval length; every 15 minutes. There are 32 15-MIN buckets of history data available for this accumulation interval length |
• |
Performance parameter accumulation interval length; starting from the last time the counters were cleared. This is only applicable to RMON managed PMs |
MONDAT |
The beginning date of the PM or storage register period specified in TMPER. The format is MM-DD. String |
MONTM |
The beginning time of day of the PM or storage register period specified in TMPER. The format is HH-MM. String |
17.20 REPT SW
Report Switch
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the autonomous switching of a unit in a duplex equipment pair to the standby state and its mate unit to the active state. An automatic report for the occurrence or clearance of an alarm or event that triggers the switch might be associated with the message.
Category
Protection
Security
Retrieve
Related Commands
ALW-SWDX-EQPT ALW-SWTOPROTN-EQPT ALW-SWTOWKG-EQPT EX-SW-<OCN_BLSR> |
INH-SWDX-EQPT INH-SWTOPROTN-EQPT INH-SWTOWKG-EQPT |
SW-DX-EQPT SW-TOPROTN-EQPT SW-TOWKG-EQPT |
Output Format
SID DATE TIME
A ATAG REPT SW
"<ACTID>,<STDBYID>"
;
Output Example
TID-000 1998-06-20 14:30:00
A 100.100 REPT SW
"SLOT-8,SLOT-10"
;
Output Parameters
|
|
|
|---|---|
ACTID |
Identifies the equipment unit from the "25.1.13 EQPT" section on page 25-27 that was placed in the active state. Parameter grouping cannot be used with this parameter |
STDBYID |
Identifies the equipment unit from the "25.1.13 EQPT" section on page 25-27 that was placed in the standby state. Parameter grouping cannot be used with this parameter |
Feedback