About this Guide
Note 
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.
This section provides the following information:
•Audience
•Document Organization
•Related Documentation
•Document Conventions
•Obtaining Optical Networking Information
•Obtaining Documentation and Submitting a Service Request
Revision History
|
|
|
March 2007 |
Revision History Table added for the first time |
August 2007 |
Updated About this Guide chapter |
April 2008 |
Changed the minute range for REPTINVL from 1-1440 min to 5-1440 min for SCHED-PMREPT command in the SCHED Commands chapter. |
May 2008 |
Added a note to the COPY-RFILE command. |
March 2009 |
•Added Facility AID format for CE-100T-8 card in Chapter 25, Access Identifiers. •Added prerequisites to COPY-RFILE command. •Updated the cct parameter in the ED-CRS-<PATH> in Chapter 11, ED Commands. |
June 2009 |
•Updated the input parameters for the APPLY command in Chapter 3, APPLY Commands. •Updated the output parameter for the RTRV-FAC command in Chapter 21, RTRV Commands. •Updated the following: –The output example and output parameters for the RTRV-CMD-SECU command in Chapter 21, RTRV Commands. –The input example and input parameters for the ED-CMD-SECU command in Chapter 11, ED Commands. |
August 2009 |
Updated the input parameter description for APPLY command in Chapter 3, APPLY Commands. |
September 2009 |
Updated the PH parameter description in Chapter 15, INIT Commands. |
November 2009 |
•Updated "OPR-PROTNSW-OCH" command description in Chapter 16, OPR Commands. •Updated the <PJMON> parameter description in Chapter 11, ED Commands. •Updated the <PJMON> parameter description in Chapter 21, RTRV Commands. |
February 2010 |
Updated Input Parameters table in Chapter "INIT Commands". |
July 2010 |
Updated the "RTRV-AUDIT-LOG" command in the chapter "RTRV Commands". |
November 2010 |
Removed the "prerequisite" section from the "COPY-RFILE" command. |
December 2010 |
Updated the following: –The input parameter, input format, and input example for the ED-WLEN command in the Chapter, ED Commands. –The input parameter, input format, and input example for the ENT-WLEN command in the Chapter, ENT Commands. |
Document Objectives
This guide explains the use of Transaction Language 1 (TL1) for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL systems. Use this guide in conjunction with the appropriate publications listed in the Related Documentation section.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably have experience as a telecommunications technician.
Document Organization
The Cisco ONS SONET TL1 Command Guide, R6.0 is organized into the following chapters:
Table 1 Cisco ONS 15454 SDH TL1 Command Guide Chapters
|
|
|
Chapter 1, "ACT Commands" |
Lists activate commands |
Chapter 2, "ALW Commands" |
Lists allow commands |
Chapter 3, "APPLY Commands" |
Lists apply commands |
Chapter 4, "CANC Commands" |
Lists cancel commands |
Chapter 5, "CHG Commands" |
Lists change commands |
Chapter 6, "CLR Commands" |
Lists clear commands |
Chapter 7, "CONN Commands" |
Lists connect commands |
Chapter 8, "COPY Commands" |
Lists copy commands |
Chapter 9, "DISC Commands" |
Lists disconnect commands |
Chapter 10, "DLT Commands" |
Lists delete commands |
Chapter 11, "ED Commands" |
Lists edit commands |
Chapter 12, "ENT Commands" |
Lists enter commands |
Chapter 13, "EX Commands" |
Lists exercise commands |
Chapter 14, "INH Commands" |
Lists inhibit commands |
Chapter 15, "INIT Commands" |
Lists initialize commands |
Chapter 16, "OPR Commands" |
Lists operate commands |
Chapter 17, "REPT Messages" |
Lists report autonomous messages |
Chapter 18, "RLS Commands" |
Lists release commands |
Chapter 19, "RMV Commands" |
Lists remove commands |
Chapter 20, "RST Commands" |
Lists restore commands |
Chapter 21, "RTRV Commands" |
Lists retrieve commands |
Chapter 22, "SCHED Commands" |
Lists schedule commands |
Chapter 23, "SET Commands" |
Lists set commands |
Chapter 24, "SW Commands" |
Lists switch commands |
Chapter 25, "Access Identifiers" |
Lists access identifiers |
Chapter 26, "Conditions" |
Lists conditions |
Chapter 27, "Modifiers" |
Lists modifiers |
Related Documentation
Use the Cisco ONS SONET TL1 Command Guide, R6.0 in conjunction with the following referenced publications:
•Cisco ONS SONET TL1 Reference Guide
Provides general information, procedures, and errors related to using TL1 in the Cisco ONS 15454, ONS 15327, ONS 15310-CL, and ONS 15600.
•Cisco ONS SONET TL1 Command Quick Reference Guide
Provides input formats and output formats (where applicable) for all R6.0 TL1 commands and autonomous messages.
•Cisco ONS SONET TL1 for Beginners
Provides basic beginning instruction for using TL1.
•Cisco ONS 15454 Procedure Guide
Cisco ONS 15327 Procedure Guide
Cisco ONS 15310-CL Procedure Guide
Cisco ONS 15600 Procedure Guide
Provides procedures and tasks for the corresponding Cisco ONS node and network.
•Cisco ONS 15454 Reference Manual
Cisco ONS 15327 Reference Manual
Cisco ONS 15310-CL Reference Manual
Cisco ONS 15600 Reference Manual
Provides reference material for the corresponding Cisco ONS node and network.
•Cisco ONS 15454 Troubleshooting Guide
Cisco ONS 15327 Troubleshooting Guide
Cisco ONS 15310-CL Troubleshooting Guide
Cisco ONS 15600 Troubleshooting Guide
Provides general troubleshooting procedures, alarm descriptions, performance monitoring parameters, and SNMP parameters.
•Ethernet Card Software Feature and Configuration Guide for the Cisco ONS 15454,
Cisco ONS 15454 SDH, and Cisco ONS 15327
Provides software features for all Ethernet cards and configuration information for Cisco IOS on ML-Series cards.
•Release Notes for the Cisco ONS 15454 Release 6.0
Release Notes for the Cisco ONS 15327 Release 6.0
Release Notes for the Cisco ONS 15310 Release 6.0
Release Notes for the Cisco ONS 15600 Release 6.0
Provides caveats, closed issues, and new feature and functionality information.
Document Conventions
This publication uses the following conventions:
|
|
|
[ ] |
Keywords or arguments that appear within square brackets are optional. |
{ x | x | x } |
A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one. |
Ctrl |
The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key. |
screen font |
Examples of information displayed on the screen. |
< > |
Command parameters that must be replaced by module-specific codes. |
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the document.
Caution
Means
reader be careful. In this situation, the user might do something that could result in equipment damage or loss of data.
|
Warning |
IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS |
Waarschuwing |
BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES |
Varoitus |
TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET |
Attention |
IMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS |
Warnung |
WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. |
Avvertenza |
IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI |
Advarsel |
VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE |
Aviso |
INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES |
¡Advertencia! |
INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES |
Varning! |
VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR |
|
|
|
|
|
|
|
|
|
|
Aviso |
INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo. GUARDE ESTAS INSTRUÇÕES |
Advarsel |
VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Obtaining Optical Networking Information
This section contains information that is specific to optical networking products. For information that pertains to all of Cisco, refer to the Obtaining Documentation and Submitting a Service Request section.
Where to Find Safety and Warning Information
For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the international agency compliance and safety information for the Cisco ONS 15454 system. It also includes translations of the safety warnings that appear in the ONS 15454 system documentation.
Cisco Optical Networking Product Documentation CD-ROM
Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Feedback