Review Safety Warnings
Review the safety warnings available at Regulatory Compliance and Safety Information for Cisco NCS 1000 Series.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter explains how to prepare for the Cisco NCS 1001 installation.
Review the safety warnings available at Regulatory Compliance and Safety Information for Cisco NCS 1000 Series.
Step 1 |
When you receive Cisco NCS 1001 equipment at the installation site, open the top of the box. The Cisco Systems logo is on the side of the box. |
||||||||||||
Step 2 |
Remove accessories and foam inserts from the box. The box contains Cisco NCS 1001 and other items needed for installation. |
||||||||||||
Step 3 |
To remove the shelf, grasp the side of the shelf and lift the shelf out of the box. |
||||||||||||
Step 4 |
Verify that you have all items.
|
||||||||||||
Step 5 |
Verify the following:
|
||||||||||||
Step 6 |
If there is any damage, call your Cisco sales engineer for a replacement. |
See Prepare to Install Cisco NCS 1000 32-Channel Mux/Demux Patch Panel for the site preparation information to install the even mux/demux patch panel.