Configuring Ethernet Interfaces
This module describes the configuration of Ethernet interfaces.
The distributed Gigabit Ethernet and 10-Gigabit, 40-Gigabit, 100-Gigabit Ethernet architecture and features deliver network scalability and performance, while enabling service providers to offer high-density, high-bandwidth networking solutions designed to interconnect the router with other systems in POPs, including core and edge routers and Layer 2 and Layer 3 switches.
![]() YANG Data Model |
You can programmatically configure and manage the Ethernet interfaces using |
Feature History for Configuring Ethernet Interfaces
Release |
Modification |
||
Release 3.7.2 |
Support was added on the Cisco ASR 9000 Series Router for the following line cards:
|
||
Release 3.9.0 |
Support was added on the Cisco ASR 9000 Series Router for the following line cards:
Support for these features was added:
|
||
Release 3.9.1 |
Support was added on the Cisco ASR 9000 Series Router for the following line cards:
|
||
Release 4.0.1 |
Support for Layer 2 statistics collection for performance monitoring on Layer 2 subinterfaces (EFPs) is added. |
||
Release 4.1.0 |
Support for Link Layer Discovery Protocol (LLDP) was added.
|
||
Release 4.1.1 |
Support was added for MAC address accounting feature. |
||
Release 4.2.2 |
Support for Unidirectional Link Routing (UDLR) was introduced. |
||
Release 4.3.1 |
Support was added on the Cisco ASR 9000 Series Router for these line cards:
Support was added on the Cisco ASR 9000 Series Router for these Modular Port Adaptors (MPAs):
|
||
Release 5.3.1 |
Support for IRB with Provider Backbone Bridge (PBB). |
||
Release 6.2.1 |
Link Degrade Alarm in Case of Link Loss Changing by 2 dB from the Preset Value |