- Overview
- OVA Images and Upgrade Scripts Verification
- Installing the OVA
- Installing Custom CA Certificates and Importing SUDI Certificate
- Configuring IoT FND for IPv6 Tunnel Provisioning and Registration
- Starting and Stopping FND
- Starting and Stopping Fog Director
- Upgrading IoT FND OVA
- Obtaining Status of All Services Running on the Host
- Backup and Restore
- Setting the Time and Timezone Using NTP Service
Overview
This document provides the steps required to install the Cisco IoT Field Network Director (Cisco IoT FND) Release 4.3.1 and Later application with Integrated Application Management (Fog Director) on an Open Virtual Appliance (OVA), VMware ESXi 5.5 or 6.0. You use the same instructions to install both VMware versions.
Note |
For information about installing Cisco IoT FND and Oracle on an OVA for Release 4.3 and Later, refer to the following guides:
|
For an overview of the features and functionality of the IoT FND application and details on how to configure features and manage Cisco IoT FND after its installation, refer to the Cisco IoT Field Network Director User Guide.
Note |
The documentation set for this product strives to use bias-free language. For purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on standards documentation, or language that is used by a referenced third-party product. |