To display the
Frequency Synchronization selection information for all selection points or for
a specific node, use the
show frequency
synchronization selection command in EXEC mode.
show frequency synchronization selection {location node-id}
Syntax Description
location
node-id
|
Displays
information for a specific node on the router. The
node-id
argument is entered in the
rack/slot/module notation.
|
Command Default
No default behavior
or values
Command History
Release
|
Modification
|
Release 6.1.42
|
This command
was introduced.
|
Usage Guidelines
The
show frequency
synchronization selection command shows the status of the timing
stream from the timing source
Task ID
Task ID
|
Operations
|
ethernet-services
|
execute
|
Examples
This example shows
the normal output for the
show frequency
synchronization selection command:
RP/0/RP0:ios # show frequency synchronization selection
Node 0/RP0:
==============
Selection point: T0_SEL (4 inputs, 1 selected)
Last programmed 00:05:34 ago, and selection made 00:05:18 ago
Next selection points
SPA scoped : None
Node scoped : T4_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Used for local line interface output
S Input Last Selection Point QL Pri Status
== ======================== ======================== ===== === ===========
1 Sync2 [0/RP0] n/a PRS 99 Locked
TenGigE0/7/0/9/4 0/RP0 LC7_ING_SEL 1 PRS 100 Available
TenGigE0/13/0/0/6 0/RP0 LC13_ING_SEL 1 STU 100 Available
Internal0 [0/RP0] n/a ST3 255 Available
Selection point: T4_SEL (2 inputs, 1 selected)
Last programmed 00:05:22 ago, and selection made 00:05:18 ago
Next selection points
SPA scoped : None
Node scoped : None
Chassis scoped: None
Router scoped : None
Uses frequency selection
Used for local clock interface output
S Input Last Selection Point QL Pri Status
== ======================== ======================== ===== === ===========
1 Sync2 [0/RP0] 0/RP0 T0_SEL 1 PRS 99 Locked
Internal0 [0/RP0] n/a ST3 255 Available
Selection point: LC0_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC1_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC2_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC3_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC4_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC5_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC6_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC7_ING_SEL (1 inputs, 1 selected)
Last programmed 00:05:36 ago, and selection made 00:05:35 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
S Input Last Selection Point QL Pri Status
== ======================== ======================== ===== === ===========
1 TenGigE0/7/0/9/4 n/a PRS 100 Available
Selection point: LC8_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC9_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC10_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC11_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC12_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC13_ING_SEL (2 inputs, 1 selected)
Last programmed 00:05:36 ago, and selection made 00:05:34 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
S Input Last Selection Point QL Pri Status
== ======================== ======================== ===== === ===========
1 TenGigE0/13/0/0/6 n/a STU 100 Available
TenGigE0/13/0/8 n/a STU 100 Available
Selection point: LC14_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection
Selection point: LC15_ING_SEL (0 inputs, 0 selected)
Last programmed 00:05:36 ago, and selection made 00:05:36 ago
Next selection points
SPA scoped : None
Node scoped : T0_SEL
Chassis scoped: None
Router scoped : None
Uses frequency selection