hardware-module olr
To divide the line cards on to two planes while preparing the node for OLR, use the hardware-module olr command in the global configuation mode.
hardware-module olr plane plane-idrack rack-id nodes node/ lc-list
Syntax Description
plane plane-id |
Specifies the plane. The line cards can be divided on to plane A or plane B. |
rack rack-id |
Specifies the rack in which the line card is present. |
nodes node/ lc-list |
Specifies the node of the line card. |
Command Default
None
Command Modes
Global Configuration
Command History
Release | Modification |
---|---|
Release 6.1.42 |
This command was introduced. |
Usage Guidelines
No specific usage guidelines.
Examples
The following example shows how to use the hw-module olr command:
RP/0/RP0:hostname(config) # hw-module plane A rack 0 nodes 1,2,3