Secure Overlay and BGP Commands

show secure-overlay

To display the secure overlay status, use the show secure-overlay command in privileged EXEC mode.

show secure-overlay

Command Default

Information about secure overlay state is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.10.1

This command was introduced.

Examples

The following is a sample output of the show secure-overlay command: 


nfvis# show secure-overlay

secure-overlay test
state                           up
active-local-bridge             wan-br
selected-local-bridge           wan-br
active-local-system-ip-addr     90.90.90.8
active-remote-interface-ip-addr 10.30.1.113
active-remote-system-ip-addr    90.90.90.1
active-remote-system-ip-subnet  90.90.90.1/32
active-remote-id                "\"10.30.1.113\""
nfvis# show bgp ?
Possible completions:
  ipv4    Address family
  vpnv4   Address family
  |       Output modifiers

show bgp vpnv4 unicast

To display the local BGP status for BGP over IPSec tunnel, use the show bgp vpnv4 unicast command in privileged EXEC mode.

show bgp vpn4 unicast

Command Default

Information about local BGP status for BGP over IPSec tunnel is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
4.5.1

This command was introduced.

Examples

The following is a sample output of the show bgp vpnv4 unicast command: 


nfvis# show bgp vpnv4 unicast

Family Transmission Router ID       Local AS Number
vpnv4  unicast      169.254.1.1     200

show bgp vpnv4 unicast route

To display the BGP learned/announced routes for BGP over IPSec tunnel, use the show bgp vpnv4 unicast route command in privileged EXEC mode.

show bgp vpn4 unicast route

Command Default

Information about the BGP learned/announced routes for BGP over IPSec tunnel is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
4.5.1

This command was introduced.

Examples

The following is a sample output of the show bgp vpnv4 unicast route command: 


nfvis# show bgp vpnv4 unicast route

Network            Next-Hop        Metric LocPrf Path
91.91.91.0/24      90.90.90.1      0      100    65000 ?
92.92.92.0/24      90.90.90.1      0      100    65000 ?
10.20.0.0/24       0.0.0.0                       i

show bgp vpnv4 unicast summary

To display the BGP neighbor status for BGP over IPSec tunnel, use the show bgp vpnv4 unicast summary command in privileged EXEC mode.

show bgp vpn4 unicast summary

Command Default

Information about the BGP neighbor status for BGP over IPSec tunnel is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
4.5.1

This command was introduced.

Examples

The following is a sample output of the show bgp vpnv4 unicast summary command: 


nfvis# show bgp vpnv4 unicast summary

Neighbor        IP Version AS Number Up/Down
90.90.90.1      4          65000     up