System Portal Commands

system portal access

To enable or disable the Cisco Enterprise NFVIS portal access, use the system portal access command in global configuration mode.

system portal access {enable | disable}

Syntax Description

enable

Enables the portal access.

disable

Disables the portal access.

Command Default

Portal access is enabled by default.

Command Modes

Global configuration (config)

Command History

Release Modification
3.5.1

This command was introduced.

Examples

The following example shows how to disable the portal access: 


nfvis(config)# system portal access disable
nfvis(config)# commit
nfvis(config)# end

show system portal status

To verify the Cisco Enterprise NFVIS portal access status, use the show system portal statuscommand in privileged EXEC mode.

show system portal status

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.5.1

This command was introduced.

Examples

The following is a sample output of the show system portal status command: 


nfvis# show system portal status
system portal status "access disabled"

show running-config system portal access

To display the running configuration for the Cisco Enterprise NFVIS portal access, use the show running-config system portal access command in privileged EXEC mode.

show running-config system portal access

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.5.1

This command was introduced.

Examples


nfvis# show running-config system portal access
system portal access enabled