Support Commands

support show arp

To display the ARP table, use the support show arp command in privileged EXEC mode.

support show arp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show arp 
IP address HW type Flags HW address Mask Device
203.0.113.1 0x1 0x2 00:25:b4:47:44:00 * wan-br
203.0.113.1 0x1 0x2 3c:ce:73:da:60:00 * wan-br
203.0.113.1 0x1 0x2 00:00:0c:9f:f0:15 * wan-br

support show bgp

To display the BGP session details, use the support show bgp command in privileged EXEC mode.

support show bgp

Command Default

Information about BGP session details is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
4.5.1

This command was introduced.

Examples

The following is a sample output of the support show bgp command:


nfvis# support show bgp

BIRD 1.6.8 ready.
name     proto    table    state  since       info
bgp_bgp_neighbor BGP      bgp_table_bgp_neighbor up     22:35:37    Established
  Preference:     100
  Input filter:   ACCEPT
  Output filter:  ACCEPT
  Import limit:   15
    Action:       disable
  Routes:         2 imported, 1 exported, 4 preferred
  Route change stats:     received   rejected   filtered    ignored   accepted
    Import updates:              2          0          0          0          2
    Import withdraws:            0          0        ---          0          0
    Export updates:              3          2          0        ---          1
    Export withdraws:            0        ---        ---        ---          0
  BGP state:          Established
    Neighbor address: 90.90.90.1
    Neighbor AS:      65000
    Neighbor ID:      90.90.90.1
    Neighbor caps:    refresh enhanced-refresh AS4
    Session:          external multihop AS4
    Source address:   90.90.90.8
    Route limit:      2/15
    Hold timer:       173/240
    Keepalive timer:  39/80

support show bgp route

To display the BGP routes learnt through BGP, use the support show bgp route command in privileged EXEC mode.

support show bgp route

Command Default

Information about the BGP routes learnt through BGP is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
4.5.1

This command was introduced.

Examples

The following is a sample output of the support show bgp route command:


nfvis# support show bgp route

BIRD 1.6.8 ready.
91.91.91.0/24      dev ipsec0 [bgp_bgp_neighbor 22:35:37 from 90.90.90.1] (100) [AS65000?]
     Type: BGP unicast univ
     BGP.origin: Incomplete
     BGP.as_path: 65000
     BGP.next_hop: 90.90.90.1
     BGP.med: 0
     BGP.local_pref: 100
92.92.92.0/24      dev ipsec0 [bgp_bgp_neighbor 22:35:37 from 90.90.90.1] (100) [AS65000?]
     Type: BGP unicast univ
     BGP.origin: Incomplete
     BGP.as_path: 65000
     BGP.next_hop: 90.90.90.1
     BGP.med: 0
     BGP.local_pref: 100
nfvis#

support show config-drive

To display the VM Day-0 configuration file listing, use the support show config-drive command in privileged EXEC mode.

support show config-drive domain

Syntax Description

domain

Specifies the domain ID or name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show config-drive 12 
-rw-r--r--. 1 qemu qemu 393216 Dec  1 00:25 /cisco/esc/esc_database/nodejs/VM/4e802bd4-c6e4-4c7b-a163-787927324967/
4e802bd4-c6e4-4c7b-a163-787927324967-hdd.config

show cellular

To display the LTE PIM module's information, use the show cellular command in privileged EXEC mode.

show cellular

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

4.4.1

This command was introduced.

Examples

nfvis# show cellular 
cellular 1/0
 details IPv4 address =     192.168.100.101
 details Default Gateway Address =  192.168.100.102
 details Interface subnet mask =  255.255.255.252
 details Interface name =   int-CELL-1-0
 details Interface Status =  up
 details DNS IP Address =   198.224.173.135
 details Modem Status =     Call_Connected
 hardware Modem Firmware Version =                                         SWI9X30C_02.33.03.00
 hardware Device Model ID =                                                EM7455
 hardware International Mobile Subscriber Identity(IMSI) =                 311480148702353
 hardware International Mobile Equipment Identity (IMEI) =                 356129070591075
 hardware Integrated Circuit Card ID (ICCID) =                             89148000001470156497
 hardware Mobile Subscriber Intergrated Services Digital Network Number (MSISDN) =  4085550087
 hardware Factory Serial Number (FSN) =                                    LF911203620410
 hardware Current Modem Temperature =                                      37 deg C
 hardware PRI SKU ID =                                                     1102526
 hardware PRI Version =                                                    002.079_001
 hardware Carrier =                                                        VERIZON
 hardware OEM PRI Version =                                                000.016
 hardware Modem Status =                                                   Modem Online
 network Current System Time =     2020/11/15/23/35/12
 network Network Selection Mode =  AUTO
 network Current Service Status =  Packet switched
 network Mobile Country Code(MCC) =  311
 network Mobile Network Code(MNC) =  480
 network Current Roaming Status =  HOME
 network Network =                 Verizon
 network Packet Switch domain(PS) state =  Attached
 network EMM State =               Registered
 network EMM Sub state =           Normal-Service
 network EMM Connection State =    2
 network Tracking Area Code (TAC) =  7936
 network Cell ID =                 7962134
 network Network MTU =             1428
 radio-details Radio Power Mode =           online
 radio-details Radio Access Technology(RAT) Preference =  AUTO
 radio-details Radio Access Technology(RAT) Selected =  LTE
 radio-details LTE RX Channel Number =      2075
 radio-details LTE TX Channel Number =      20075
 radio-details LTE Band =                   4
 radio-details LTE Bandwidth =              15 MHz
 radio-details Current RSSI =               -73 dBm
 radio-details Current RSRP =               -103 dBm
 radio-details Current RSRQ =               -10 dB
 radio-details Current SNR =                5 dB
 radio-details PCI =                        169
Profile 3, Packet Session Status = ACTIVE
Call end mode = None
Session disconnect reason type = None(0)
Session disconnect reason = None(0)
PDN 0
Back off timer is NOT running
Back off error count = 0
Back off timer index = 0
Back off timer array (in minutes) = 0 1 1 1 5 10 15 30 60
Cellular interface back-off is not enforced
Period of back-off = 0 minute(s)
 profile-details 1
  PDP-Type       IPv4v6
  APN-Name       ims
  state          INACTIVE
  PDP-Address    0.0.0.0
  Authentication None
  Username
  Password
 profile-details 2
  PDP-Type       IPv4v6
  APN-Name       vzwadmin
  state          INACTIVE
  PDP-Address    0.0.0.0
  Authentication None
  Username
  Password
 profile-details 3
  PDP-Type       IPv4v6
  APN-Name       we01.VZWSTATIC
  state          ACTIVE
  PDP-Address    192.168.100.101
  Authentication None
  Username
  Password
 profile-details 4
  PDP-Type       IPv4v6
  APN-Name       vzwapp
  state          INACTIVE
  PDP-Address    0.0.0.0
  Authentication None
  Username
  Password
 profile-details 5
  PDP-Type       IPv4v6
  APN-Name       vzw800
  state          INACTIVE
  PDP-Address    0.0.0.0
  Authentication None
  Username
  Password
 profile-details 6
  PDP-Type       IPv4v6
  APN-Name       vzwclass6
  state          INACTIVE
  PDP-Address    0.0.0.0
  Authentication None
  Username
  Password
 status Firmware Upgrade Status =  "Not Initiated"
 status DM Logging Status =  Stopped
SIM
ID   SIM STATUS
-------------------
0    OK
1    Not inserted

show cellular 1/0

To display cellular information, use the show cellular 1/0 command in privileged EXEC mode.

show cellular 1/0

Syntax Description

connection

Displays cellular connection information.

details

Displays cellular basic information.

hardware

Displays cellular hardware information.

network

Displays cellular network information.

profile-details

Displays cellular profile details.

radio-details

Displays cellular radio details.

status

Displays cellular status details.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

4.4.1

This command was introduced.

Examples

The following examples shows the individual cellular information using the show cellular 1/0 command.

The command show cellular 1/0 connection is used to display the status and details of the cellular connection on a specific interface.

nfvis# show cellular 1/0 connection
Profile 3, Packet Session Status = ACTIVE
Call end mode = None
Session disconnect reason type = None(0)
Session disconnect reason = None(0)
PDN 0
Back off timer is NOT running
Back off error count = 0
Back off timer index = 0
Back off timer array (in minutes) = 0 1 1 1 5 10 15 30 60
Cellular interface back-off is not enforced
Period of back-off = 0 minute(s)

The command show cellular 1/0 details is used to provide detailed information about the cellular interface 1/0.

nfvis# show cellular 1/0 details
details IPv4 address =     192.168.100.101
details Default Gateway Address =  192.168.100.102
details Interface subnet mask =  255.255.255.252
details Interface name =   int-CELL-1-0
details Interface Status =  up
details DNS IP Address =   198.224.173.135
details Modem Status =     Call_Connected

The command show cellular 1/0 hardware provides detailed hardware information for the cellular interface 1/0 on a Cisco IOS XE Catalyst SD-WAN device.

nfvis# show cellular 1/0 hardware
hardware Modem Firmware Version =                                         SWI9X30C_02.33.03.00
hardware Device Model ID =                                                EM7455
hardware International Mobile Subscriber Identity(IMSI) =                 311480148702353
hardware International Mobile Equipment Identity (IMEI) =                 356129070591075
hardware Integrated Circuit Card ID (ICCID) =                             89148000001470156497
hardware Mobile Subscriber Intergrated Services Digital Network Number (MSISDN) =  4085550087
hardware Factory Serial Number (FSN) =                                    LF911203620410
hardware Current Modem Temperature =                                      37 deg C
hardware PRI SKU ID =                                                     1102526
hardware PRI Version =                                                    002.079_001
hardware Carrier =                                                        VERIZON
hardware OEM PRI Version =                                                000.016
hardware Modem Status =                                                   Modem Online

The command show cellular 1/0 network provides detailed network information for the cellular interface 1/0 on a Cisco IOS XE Catalyst SD-WAN device.

nfvis# show cellular 1/0 network
C8200-NFVIS# show cellular 1/0 network
network Current System Time =     2020/11/15/23/39/52
network Network Selection Mode =  AUTO
network Current Service Status =  Packet switched
network Mobile Country Code(MCC) =  311
network Mobile Network Code(MNC) =  480
network Current Roaming Status =  HOME
network Network =                 Verizon
network Packet Switch domain(PS) state =  Attached
network EMM State =               Registered
network EMM Sub state =           Normal-Service
network EMM Connection State =    2
network Tracking Area Code (TAC) =  7936
network Cell ID =                 7962134
network Network MTU =             1428

The command show cellular 1/0 profile-details provides detailed information about the profiles configured on the cellular interface 1/0 of a Cisco IOS XE Catalyst SD-WAN device.

nfvis# show cellular 1/0 profile-details
profile-details 1
 PDP-Type       IPv4v6
 APN-Name       ims
 state          INACTIVE
 PDP-Address    0.0.0.0
 Authentication None
 Username
 Password
profile-details 2
 PDP-Type       IPv4v6
 APN-Name       vzwadmin
 state          INACTIVE
 PDP-Address    0.0.0.0
 Authentication None
 Username
 Password
profile-details 3
 PDP-Type       IPv4v6
 APN-Name       we01.VZWSTATIC
 state          ACTIVE
 PDP-Address    192.168.100.101
 Authentication None
 Username
 Password
profile-details 4
 PDP-Type       IPv4v6
 APN-Name       vzwapp
 state          INACTIVE
 PDP-Address    0.0.0.0
 Authentication None
 Username
 Password
profile-details 5
 PDP-Type       IPv4v6
 APN-Name       vzw800
 state          INACTIVE
 PDP-Address    0.0.0.0
 Authentication None
 Username
 Password
profile-details 6
 PDP-Type       IPv4v6
 APN-Name       vzwclass6
 state          INACTIVE
 PDP-Address    0.0.0.0
 Authentication None
 Username
 Password

The command show cellular 1/0 radio-details provides information about the radio parameters and current signal status for the cellular interface 1/0 on a Cisco IOS XE Catalyst SD-WAN device.

nfvis# show cellular 1/0 radio-details
radio-details Radio Power Mode =           online
radio-details Radio Access Technology(RAT) Preference =  AUTO
radio-details Radio Access Technology(RAT) Selected =  LTE
radio-details LTE RX Channel Number =      2075
radio-details LTE TX Channel Number =      20075
radio-details LTE Band =                   4
radio-details LTE Bandwidth =              15 MHz
radio-details Current RSSI =               -72 dBm
radio-details Current RSRP =               -103 dBm
radio-details Current RSRQ =               -17 dB
radio-details Current SNR =                7 dB
radio-details PCI =                        169

The command show cellular 1/0 status provides an overview of the status for the cellular interface 1/0 on a Cisco IOS XE Catalyst SD-WAN device.

nfvis# show cellular 1/0 status
status Firmware Upgrade Status =  "Not Initiated"
status DM Logging Status =  Stopped
SIM
ID   SIM STATUS
-------------------
0    OK
1    Not inserted

support show config-drive content

To display the brief content of VM Day-0 configuration file, use the support show config-drive content command in privileged EXEC mode.

support show config-drive content domain

Syntax Description

domain

Specifies the domain ID or name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show config-drive content 12 
<version text="1"/> <hypervisor text="nfvis"/> <guest text="TEST"/> <gateway addr="10.1.1.1"/> 
<mgmt-intf text="Virtual2"/> 
<data-intf text="SHARED"/> <localip addr="10.1.1.1" mask="10.1.1.1"/> <int-intf text="Virtual1"/> 
<intip addr="10.20.0.3" mask="255.255.255.0"/> <cm addr="10.1.1.1"/> <ntp addr="10.1.1.1"/> </bootstrap>
 vWAAS-6000R <bootstrap> <version text="1"/> <hypervisor text="nfvis"/> <guest text="TEST"/> <gateway addr="10.1.1.1"/> 
<mgmt-intf text="Virtual2"/> <data-intf text="SHARED"/> <localip addr="10.1.1.1" mask="10.1.1.1"/> 
<int-intf text="Virtual1"/> <intip addr="10.20.0.3" mask="255.255.255.0"/> 
<cm addr="10.1.1.1"/> <ntp addr="10.1.1.1"/> </bootstrap> 
vWAAS-6000R {"files":[{"path":"bootstrap-cfg.xml","content_path":"/content/0000"},{"path":"model.txt","content_path":
"/content/0001"}]}

support show cpuinfo

To display CPU information, use the support show cpuinfo command in privileged EXEC mode.

support show cpuinfo

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show cpuinfo 
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 79
model name : Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz
stepping : 1
microcode : 0xb00001f
cpu MHz : 1265.859
cache size : 25600 KB
physical id : 0
siblings : 20
core id : 0
cpu cores : 10
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 20
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ida arat epb pln pts dtherm intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdseed adx smap xsaveopt cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local
bogomips : 4389.33
clflush size : 64
cache_alignment : 64
address sizes : 46 bits physical, 48 bits virtual
power management:
...

support show date-time

To display the date and time information, use the support show date-time command in privileged EXEC mode.

support show date-time

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show date-time 
Thu Nov 16 10:50:52 UTC 2017

support show df

To display the amount of disk space used and available, use the support show df command in privileged EXEC mode.

support show df

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show df 
Filesystem Type 1024-blocks Used Available Capacity Mounted on
/dev/mapper/vg_nfv-lv_root ext4 8125880 1755256 5934812 23% /
devtmpfs devtmpfs 65863696 0 65863696 0% /dev
tmpfs tmpfs 65874332 12 65874320 1% /dev/shm
tmpfs tmpfs 65874332 1224 65873108 1% /run
tmpfs tmpfs 65874332 0 65874332 0% /sys/fs/cgroup
/dev/sda2 ext4 739536 112860 572916 17% /boot
/dev/mapper/vg_nfv-lv_var ext4 3997376 137112 3634168 4% /var
/dev/mapper/vg_nfv-lv_data ext4 2311085988 4765488 2305792116 1% /data
tmpfs tmpfs 13174868 0 13174868 0% /run/user/0

support show domainname

To display the information about domain name, use the support show domainname command in privileged EXEC mode.

support show domainname

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show domainname 

support show dmidecode

To display the system hardware information, use the support show dmidecode command in privileged EXEC mode.

support show dmidecode

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show dmidecode 
# dmidecode 3.0
Scanning /dev/mem for entry point.
SMBIOS 3.0.0 present.
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Cisco Systems Inc
Product Name: UCSC-C220-M4S
Version: A0
Serial Number: FCH2110V0DX
UUID: EB7C9CE9-9DF9-3142-898B-C84A16B10706
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Cisco Systems Inc
Product Name: UCSC-C220-M4S
Version: 74-12419-02
Serial Number: FCH2108JLC4
Asset Tag: Unknown
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Not Specified
Chassis Handle: 0x0003
Type: Server Blade
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 25 bytes
Chassis Information
Manufacturer: Cisco Systems Inc
Type: Rack Mount Chassis
Lock: Not Present
Version: 74-12502-02
Serial Number: FCH2110V0DX
Asset Tag: Unknown
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00018755
Height: 1 U
Number Of Power Cords: 1
Contained Elements: 1

support show ethtool

To display the standard information about a device, use the support show ethtool command in privileged EXEC mode.

support show ethtool devicename

Syntax Description

devicename

Specifies the name of the device.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show ethtool eth1 
nfvis# support show ethtool eth1
Driver information for device eth1
driver: igb
version: 5.3.0-k
firmware-version: 1.63, 0x80000b15, 0.384.130
expansion-rom-version: 
bus-info: 0000:01:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

Features for eth1:
rx-checksumming: on
tx-checksumming: on
 tx-checksum-ipv4: off [fixed]
 tx-checksum-ip-generic: on
 tx-checksum-ipv6: off [fixed]
 tx-checksum-fcoe-crc: off [fixed]
 tx-checksum-sctp: on
scatter-gather: on
 tx-scatter-gather: on
 tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: on
 tx-tcp-segmentation: on
 tx-tcp-ecn-segmentation: off [fixed]
 tx-tcp6-segmentation: on
udp-fragmentation-offload: off [fixed]
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off [fixed]
rx-vlan-offload: on
tx-vlan-offload: on
ntuple-filters: off
receive-hashing: on
highdma: on [fixed]
rx-vlan-filter: on [fixed]
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
netns-local: off [fixed]
tx-gso-robust: off [fixed]
tx-fcoe-segmentation: off [fixed]
tx-gre-segmentation: off [fixed]
tx-ipip-segmentation: off [fixed]
tx-sit-segmentation: off [fixed]
tx-udp_tnl-segmentation: off [fixed]
tx-mpls-segmentation: off [fixed]
fcoe-mtu: off [fixed]
tx-nocache-copy: off
loopback: off [fixed]
rx-fcs: off [fixed]
rx-all: off
tx-vlan-stag-hw-insert: off [fixed]
rx-vlan-stag-hw-parse: off [fixed]
rx-vlan-stag-filter: off [fixed]
busy-poll: off [fixed]
tx-sctp-segmentation: off [fixed]
l2-fwd-offload: off [fixed]
hw-tc-offload: off [fixed]
Permanent address: 70:db:98:70:2f:6f
Pause parameters for eth1:
Autonegotiate: on
RX:  off
TX:  off


NIC statistics:
     rx_packets: 0
     tx_packets: 0
     rx_bytes: 0
     tx_bytes: 0
     rx_broadcast: 0
     tx_broadcast: 0
     rx_multicast: 0
     tx_multicast: 0
     multicast: 0
     collisions: 0
     rx_crc_errors: 0
     rx_no_buffer_count: 0
     rx_missed_errors: 0
     tx_aborted_errors: 0
     tx_carrier_errors: 0
     tx_window_errors: 0
     tx_abort_late_coll: 0
     tx_deferred_ok: 0
     tx_single_coll_ok: 0
     tx_multi_coll_ok: 0
     tx_timeout_count: 0
     rx_long_length_errors: 0
     rx_short_length_errors: 0
     rx_align_errors: 0
     tx_tcp_seg_good: 0
     tx_tcp_seg_failed: 0
     rx_flow_control_xon: 0
     rx_flow_control_xoff: 0
     tx_flow_control_xon: 0
     tx_flow_control_xoff: 0
     rx_long_byte_count: 0
     tx_dma_out_of_sync: 0
     tx_smbus: 0
     rx_smbus: 0
     dropped_smbus: 0
     os2bmc_rx_by_bmc: 0
     os2bmc_tx_by_bmc: 0
     os2bmc_tx_by_host: 0
     os2bmc_rx_by_host: 0
     tx_hwtstamp_timeouts: 0
     rx_hwtstamp_cleared: 0
     rx_errors: 0
     tx_errors: 0
     tx_dropped: 0
     rx_length_errors: 0
     rx_over_errors: 0
     rx_frame_errors: 0
     rx_fifo_errors: 0
     tx_fifo_errors: 0
     tx_heartbeat_errors: 0
     tx_queue_0_packets: 0
     tx_queue_0_bytes: 0
     tx_queue_0_restart: 0
     tx_queue_1_packets: 0
     tx_queue_1_bytes: 0
     tx_queue_1_restart: 0
     tx_queue_2_packets: 0
     tx_queue_2_bytes: 0
     tx_queue_2_restart: 0
     tx_queue_3_packets: 0
     tx_queue_3_bytes: 0
     tx_queue_3_restart: 0
     tx_queue_4_packets: 0
     tx_queue_4_bytes: 0
     tx_queue_4_restart: 0
     tx_queue_5_packets: 0
     tx_queue_5_bytes: 0
     tx_queue_5_restart: 0
     tx_queue_6_packets: 0
     tx_queue_6_bytes: 0
     tx_queue_6_restart: 0
     tx_queue_7_packets: 0
     tx_queue_7_bytes: 0
     tx_queue_7_restart: 0
     rx_queue_0_packets: 0
     rx_queue_0_bytes: 0
     rx_queue_0_drops: 0
     rx_queue_0_csum_err: 0
     rx_queue_0_alloc_failed: 0
     rx_queue_1_packets: 0
     rx_queue_1_bytes: 0
     rx_queue_1_drops: 0
     rx_queue_1_csum_err: 0
     rx_queue_1_alloc_failed: 0
     rx_queue_2_packets: 0
     rx_queue_2_bytes: 0
     rx_queue_2_drops: 0
     rx_queue_2_csum_err: 0
     rx_queue_2_alloc_failed: 0
     rx_queue_3_packets: 0
     rx_queue_3_bytes: 0
     rx_queue_3_drops: 0
     rx_queue_3_csum_err: 0
     rx_queue_3_alloc_failed: 0
     rx_queue_4_packets: 0
     rx_queue_4_bytes: 0
     rx_queue_4_drops: 0
     rx_queue_4_csum_err: 0
     rx_queue_4_alloc_failed: 0
     rx_queue_5_packets: 0
     rx_queue_5_bytes: 0
     rx_queue_5_drops: 0
     rx_queue_5_csum_err: 0
     rx_queue_5_alloc_failed: 0
     rx_queue_6_packets: 0
     rx_queue_6_bytes: 0
     rx_queue_6_drops: 0
     rx_queue_6_csum_err: 0
     rx_queue_6_alloc_failed: 0
     rx_queue_7_packets: 0
     rx_queue_7_bytes: 0
     rx_queue_7_drops: 0
     rx_queue_7_csum_err: 0
     rx_queue_7_alloc_failed: 0

Coalesce parameters for eth1:
Adaptive RX: off  TX: off
stats-block-usecs: 0
sample-interval: 0
pkt-rate-low: 0
pkt-rate-high: 0

rx-usecs: 3
rx-frames: 0
rx-usecs-irq: 0
rx-frames-irq: 0

tx-usecs: 0
tx-frames: 0
tx-usecs-irq: 0
tx-frames-irq: 0

rx-usecs-low: 0
rx-frame-low: 0
tx-usecs-low: 0
tx-frame-low: 0

rx-usecs-high: 0
rx-frame-high: 0
tx-usecs-high: 0
tx-frame-high: 0

Ring parameters for eth1:
Pre-set maximums:
RX:  4096
RX Mini: 0
RX Jumbo: 0
TX:  4096
Current hardware settings:
RX:  256
RX Mini: 0
RX Jumbo: 0
TX:  256

support show ifconfig

To display the configuration details of all network interfaces or a specific interface, use the support show ifconfig command in privileged EXEC mode.

support show ifconfig interface

Syntax Description

interface

Specifies the interface name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show ifconfig wan-br 
wan-br: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000
inet 172.19.181.196 netmask 255.255.255.0 broadcast 172.19.181.255
inet6 fe80::72db:98ff:fe70:2f6e prefixlen 64 scopeid 0x20<link>
ether 70:db:98:70:2f:6e txqueuelen 1000 (Ethernet)
RX packets 3373533 bytes 5021452007 (4.6 GiB)
RX errors 0 dropped 3945 overruns 0 frame 0
TX packets 337841 bytes 30441490 (29.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

support show iostat

To display the I/O statistics of block devices, use the support show iostat command in privileged EXEC mode.

support show iostat

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show iostat 
Major Minor Device Reads Reads Sectors Time (ms) Writes Writes Sectors Time (ms) IOs In Time (ms) Weighted 
Number Number Name Successful Merged Read Reading Completed Merged Written Writing Progress Doing IOs Time(ms) IOs
-----------------------------------------------------------------------------------------------------------------------------------------
8 0 sda 34721 8 938752 149830 2713238 302897 37631784 84086836 0 1098844 84236605 
8 1 sda1 52 0 416 156 0 0 0 0 0 156 156 
8 2 sda2 437 0 49322 629 7 1 64 0 0 469 628 
8 3 sda3 34054 8 884766 148345 2713231 302896 37631720 84086836 0 1098524 84238309 
253 0 dm-0 17693 0 564042 101847 66698 0 694744 74520 0 40719 176366 
253 1 dm-1 218 0 4456 832 0 0 0 0 0 810 832 
253 2 dm-2 15066 0 261514 42646 2911495 0 36585456 84848114 0 1056312 84891060 
253 3 dm-3 1055 0 53730 4699 37951 0 351520 246240 0 20556 250939

support show ipsec

To display the IPsec session details, use the support show ipsec command in privileged EXEC mode.

support show ipsec

Command Default

Information about IPsec session details is displayed.

Command Modes

Privileged EXEC (#)

Command History

Release Modification
4.5.1

This command was introduced.

Examples

The following is a sample output of the support show ipsec command:


nfvis# support show ipsec

Status of IKE charon daemon (strongSwan 5.7.1, Linux 3.10.0-1062.4.1.el7.x86_64, x86_64):
  uptime: 13 minutes, since Mar 24 22:35:31 2021
  malloc: sbrk 2822144, mmap 0, used 630752, free 2191392
  worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 2
  loaded plugins: charon pkcs11 tpm aesni aes des rc2 sha2 sha1 md4 md5 mgf1 random nonce x509 revocation constraints acert pubkey pkcs1 pkcs7 pkcs8 pkcs12 pgp dnskey sshkey pem openssl gcrypt fips-prf gmp curve25519 chapoly xcbc cmac hmac ctr ccm gcm curl attr kernel-netlink resolve socket-default stroke vici updown eap-identity eap-sim eap-aka eap-aka-3gpp eap-aka-3gpp2 eap-md5 eap-gtc eap-mschapv2 eap-dynamic eap-radius eap-tls eap-ttls eap-peap xauth-generic xauth-eap xauth-pam xauth-noauth dhcp led duplicheck unity counters
Listening IP addresses:
  192.168.1.1
  172.25.221.110
  192.168.50.1
  192.168.10.11
  169.254.1.1
Connections:
        test:  172.25.221.110...10.30.1.113  IKEv2
        test:   local:  [172.25.221.110] uses pre-shared key authentication
        test:   remote: [10.30.1.113] uses pre-shared key authentication
        test:   child:  0.0.0.0/0 === 0.0.0.0/0 TUNNEL
Security Associations (1 up, 0 connecting):
        test[1]: ESTABLISHED 13 minutes ago, 172.25.221.110[172.25.221.110]...10.30.1.113[10.30.1.113]
        test[1]: IKEv2 SPIs: 9371ee51ac1b436d_i* 52e341d1eb29f7bf_r, rekeying in 23 hours
        test[1]: IKE proposal: AES_CBC_256/HMAC_SHA2_512_256/PRF_HMAC_SHA2_512/MODP_2048
        test{1}:  INSTALLED, TUNNEL, reqid 1, ESP SPIs: c916a993_i 7bb99a5e_o
        test{1}:  AES_CBC_256/HMAC_SHA2_512_256, 8393 bytes_i (111 pkts, 1s ago), 8485 bytes_o (112 pkts, 1s ago), rekeying in 40 minutes
        test{1}:   0.0.0.0/0 === 0.0.0.0/0

support show loadavg

To display the load average of CPU and IO over 1, 5, and 10 minute period, use the support show loadavg command in privileged EXEC mode.

support show loadavg

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show loadavg 
Avg CPU and IO Utilization (1m) : 0.40
Avg CPU and IO Utilization (5m) : 0.36
Avg CPU and IO Utilization (10m) : 0.33
Running/Total Num of Processes : 1/678
Last Proccess ID Used : 13411

support show meminfo

To display the information about system's RAM usage, use the support show meminfo command in privileged EXEC mode.

support show meminfo

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show meminfo 
MemTotal: 131748668 kB
MemFree: 123779264 kB
MemAvailable: 128225916 kB
Buffers: 11800 kB
Cached: 4887312 kB
SwapCached: 0 kB
Active: 1842792 kB
Inactive: 4658692 kB
Active(anon): 1613936 kB
Inactive(anon): 13644 kB
Active(file): 228856 kB
Inactive(file): 4645048 kB
Unevictable: 184888 kB
Mlocked: 184888 kB
SwapTotal: 16777212 kB
SwapFree: 16777212 kB
Dirty: 5112 kB
Writeback: 0 kB
AnonPages: 1787960 kB
Mapped: 95852 kB
Shmem: 16156 kB
Slab: 240824 kB
SReclaimable: 172504 kB
SUnreclaim: 68320 kB
KernelStack: 11536 kB
PageTables: 22360 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 82651544 kB
Committed_AS: 7245188 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 507704 kB
VmallocChunk: 34291843068 kB
HardwareCorrupted: 0 kB
AnonHugePages: 1208320 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 171680 kB
DirectMap2M: 7055360 kB
DirectMap1G: 128974848 kB

support show netstattcp

To display the network connection and protocol statistics information for TCP, use the support show netstattcp command in privileged EXEC mode.

support show netstattcp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show netstattcp 
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State 
tcp 0 0 127.0.0.1:7878 0.0.0.0:* LISTEN 
tcp 0 0 127.0.0.1:199 0.0.0.0:* LISTEN 
tcp 0 0 127.0.0.1:2023 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:8008 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:22222 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 
tcp 0 0 127.0.0.1:4565 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 
tcp 0 0 0.0.0.0:830 0.0.0.0:* LISTEN 
tcp 0 0 127.0.0.1:8000 0.0.0.0:* LISTEN 
tcp6 0 0 :::8001 :::* LISTEN 
tcp6 0 0 127.0.0.1:8005 :::* LISTEN 
tcp6 0 0 ::1:7878 :::* LISTEN 
tcp6 0 0 :::8009 :::* LISTEN 
tcp6 0 0 :::22222 :::* LISTEN 
tcp6 0 0 :::111 :::* LISTEN 
tcp6 0 0 :::8080 :::* LISTEN 
tcp6 0 0 :::80 :::* LISTEN 
tcp6 0 0 :::8081 :::* LISTEN 
tcp6 0 0 :::22 :::* LISTEN 
tcp6 0 0 :::443 :::* LISTEN 
tcp6 0 0 :::830 :::* LISTEN

support show netstatudp

To display the network connection and protocol statistics information for UDP, use the support show netstatudp command in privileged EXEC mode.

support show netstatudp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show netstatudp 
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State 
udp 0 0 0.0.0.0:161 0.0.0.0:* 
udp 0 0 127.0.0.1:323 0.0.0.0:* 
udp 0 0 0.0.0.0:1610 0.0.0.0:* 
udp6 0 0 ::1:323 :::* 
udp6 0 0 ::1:1610 :::*

support show procstat

To display the statistics information for kernel or system, use the support show procstat command in privileged EXEC mode.

support show procstat

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show procstat 
cpu 155096 1 303421 267304458 50402 0 4774 0 52078 0
cpu0 29046 0 43045 6607705 3121 0 1175 0 0 0
cpu1 27238 0 39353 6562272 1857 0 2558 0 0 0
cpu2 0 0 231 6697805 0 0 0 0 0 0
cpu3 0 0 231 6698222 0 0 0 0 0 0
cpu4 0 0 231 6698222 0 0 0 0 0 0
cpu5 0 0 231 6698222 0 0 0 0 0 0
cpu6 0 0 231 6698222 0 0 0 0 0 0
cpu7 0 0 231 6698221 0 0 0 0 0 0
cpu8 0 0 231 6698221 0 0 0 0 0 0
cpu9 0 0 231 6698221 0 0 0 0 0 0
cpu10 0 0 262 6697886 0 0 0 0 0 0
cpu11 0 0 231 6698214 0 0 0 0 0 0
cpu12 0 0 231 6698213 0 0 0 0 0 0
cpu13 0 0 231 6698213 0 0 0 0 0 0
cpu14 0 0 231 6698212 0 0 0 0 0 0
cpu15 0 0 231 6698212 0 0 0 0 0 0
cpu16 0 0 231 6698212 0 0 0 0 0 0
cpu17 0 0 231 6698211 0 0 0 0 0 0
cpu18 0 0 231 6698211 0 0 0 0 0 0
cpu19 52484 0 27416 6600223 63 0 41 0 52078 0
cpu20 22792 0 95509 6572676 1530 0 368 0 0 0
cpu21 23533 0 89953 6524896 43829 0 631 0 0 0
cpu22 0 0 231 6698210 0 0 0 0 0 0
cpu23 0 0 231 6698210 0 0 0 0 0 0
cpu24 0 0 231 6698209 0 0 0 0 0 0
cpu25 0 0 231 6698209 0 0 0 0 0 0
cpu26 0 0 231 6698209 0 0 0 0 0 0
cpu27 0 0 231 6698209 0 0 0 0 0 0
cpu28 0 0 231 6698208 0 0 0 0 0 0
cpu29 0 0 231 6698207 0 0 0 0 0 0
cpu30 0 0 231 6698207 0 0 0 0 0 0
cpu31 0 0 231 6698207 0 0 0 0 0 0
cpu32 0 0 231 6698206 0 0 0 0 0 0
cpu33 0 0 231 6698206 0 0 0 0 0 0
cpu34 0 0 231 6698206 0 0 0 0 0 0
cpu35 0 0 231 6698205 0 0 0 0 0 0
cpu36 0 0 231 6698205 0 0 0 0 0 0
cpu37 0 0 231 6698204 0 0 0 0 0 0
cpu38 0 0 231 6698204 0 0 0 0 0 0
cpu39 0 0 231 6698204 0 0 0 0 0 0
intr 71282795 154 0 0 0 890 0 0 0 1 148338 0 0 0 0 0 0 0 0 129 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 162766 64744 
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 533 25119 2256492 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 171740 2860624 
452569 36061 40063 97867 61120 302923 0 0 33470 33470 33470 33470 33470 33470 33470 33470 0 33469 33469 33469 33469 
33469 33469 33469 33469 0 0 33469 33469 33469 33469 33469 33469 33469 33469 0 0 33468 33468 33468 33468 33468 33468 
33468 33468 0 0 33468 33468 33468 33468 33468 33468 33468 33468 33433 33433 33433 33433 33433 33433 33433 33433 33433 
33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 
33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 0 0 33433 33433 33433 33433 33433 33433 33433 33433 
33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 
33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 33433 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
ctxt 107838268
btime 1510762560
processes 162648
procs_running 1
procs_blocked 0
softirq 73632593 9 31179219 13427 11364643 2471015 0 686 11744081 0 16859513

support show route

To display the route netstat information, use the support show route command in privileged EXEC mode.

support show route

Syntax Description

table-id

(Optional) Specifies the table ID.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples


nfvis# support show route ?
Possible completions:
  Linux routing table number to display  |  <cr>
nfvis# support show route 220
90.90.90.1 dev ipsec0 scope link
91.91.91.0/24 dev ipsec0 proto bird scope link
92.92.92.0/24 dev ipsec0 proto bird scope link

support show snmp

To display the IP, ICMP, TCP, and UDP MIB information for SNMP agent, use the support show snmp command in privileged EXEC mode.

support show snmp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show snmp 
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests 
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates
Ip: 1 64 6869229 0 0 0 0 0 3944160 3939158 407 0 0 0 0 0 0 0 0
Icmp: InMsgs InErrors InCsumErrors InDestUnreachs InTimeExcds InParmProbs InSrcQuenchs InRedirects InEchos InEchoReps InTimestamps
 InTimestampReps InAddrMasks InAddrMaskReps OutMsgs OutErrors OutDestUnreachs OutTimeExcds OutParmProbs OutSrcQuenchs OutRedirects
 OutEchos OutEchoReps OutTimestamps OutTimestampReps OutAddrMasks OutAddrMaskReps
Icmp: 9732 0 0 9732 0 0 0 0 0 0 0 0 0 0 9735 0 9735 0 0 0 0 0 0 0 0 0 0
IcmpMsg: InType3 OutType3
IcmpMsg: 9732 9735
Tcp: RtoAlgorithm RtoMin RtoMax MaxConn ActiveOpens PassiveOpens AttemptFails EstabResets CurrEstab InSegs OutSegs RetransSegs 
InErrs OutRsts InCsumErrors
Tcp: 1 200 120000 -1 15203 14161 1119 7 402 3931354 3927811 489 0 1127 0
Udp: InDatagrams NoPorts InErrors OutDatagrams RcvbufErrors SndbufErrors InCsumErrors
Udp: 0 9732 0 9732 0 0 0
UdpLite: InDatagrams NoPorts InErrors OutDatagrams RcvbufErrors SndbufErrors InCsumErrors
UdpLite: 0 0 0 0 0 0 0

support show system-version

To display the information about the system version, use the support show system-version command in privileged EXEC mode.

support show system-version

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show system-version 
Linux version 3.10.0-514.21.1.el7.x86_64 (abc@sample.localdomain) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) )
 #1 SMP Tue Aug 8 14:23:12 IST 2017

support show system-hostname

To display the system host name, use the support show system-hostname command in privileged EXEC mode.

support show system-hostname

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support show system-hostname 
nfvis

support virsh all-info

To display the output of all supported virsh commands, use the support virsh all-info command in privileged EXEC mode.

support virsh all-info

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh all-info 
support virsh list
 Id    Name                           State
----------------------------------------------------
 1     1510117366.RouterUnmon         running
 2     1510085877.ubuntu              running
 3     1510095552.ROUTER              running
 4     isr1-dep.isr1-vg               running


support virsh dumpxml 1
<domain type='kvm' id='1'>
  <name>1510117366.RouterUnmon</name>
  <uuid>2329b9ff-2a77-4e20-9cad-a5a5984bd4ba</uuid>
  <memory unit='KiB'>2359296</memory>
  <currentMemory unit='KiB'>2359296</currentMemory>
  <vcpu placement='static' current='2'>8</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='12'/>
    <vcpupin vcpu='1' cpuset='11'/>
    <emulatorpin cpuset='11-12'/>
  </cputune>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch='x86_64' machine='pc-i440fx-rhel7.0.0'>hvm</type>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <pae/>
  </features>
  <cpu mode='host-passthrough'/>
  <clock offset='utc'/>
  <on_poweroff>restart</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/libexec/qemu-kvm</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writethrough'/>
      <source file='/data/cisco/vm_lifecycle/volumes/2329b9ff-2a77-4e20-9cad-a5a5984bd4ba_0.img'/>
      <backingStore type='file' index='1'>
        <format type='qcow2'/>
        <source file='/data/cisco/vm_lifecycle/volumes/isrv-universalk9.16.06.01-vga.qcow2_0.img'/>
        <backingStore/>
      </backingStore>
      <target dev='vda' bus='virtio'/>
      <alias name='virtio-disk0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </disk>
    <controller type='usb' index='0'>
      <alias name='usb'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pci-root'>
      <alias name='pci.0'/>
    </controller>
    <interface type='bridge'>
      <mac address='52:54:00:f7:06:89'/>
      <source network='lan-net' bridge='lan-br'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='98b0908f-8ddc-4800-b970-b1a902f2f1ac'/>
      </virtualport>
      <target dev='vnic8'/>
      <model type='virtio'/>
      <alias name='net0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <interface type='bridge'>
      <mac address='52:54:00:52:67:ba'/>
      <source network='wan-net' bridge='wan-br'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='b42b7f81-37a8-45c5-b468-ec60074a5ec4'/>
      </virtualport>
      <target dev='vnic9'/>
      <model type='virtio'/>
      <alias name='net1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </interface>
    <input type='mouse' bus='ps2'>
      <alias name='input0'/>
    </input>
    <input type='tablet' bus='usb'>
      <alias name='input1'/>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='keyboard' bus='ps2'>
      <alias name='input2'/>
    </input>
    <graphics type='vnc' port='5900' autoport='yes' listen='0.0.0.0'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <video>
      <model type='cirrus' vram='16384' heads='1' primary='yes'/>
      <alias name='video0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='none'/>
  </devices>
  <seclabel type='dynamic' model='selinux' relabel='yes'>
    <label>system_u:system_r:svirt_t:s0:c379,c571</label>
    <imagelabel>system_u:object_r:svirt_image_t:s0:c379,c571</imagelabel>
  </seclabel>
  <seclabel type='dynamic' model='dac' relabel='yes'>
    <label>+107:+107</label>
    <imagelabel>+107:+107</imagelabel>
  </seclabel>
</domain>
...

support virsh capabilities

To display the host capabilities, use the support virsh capabilities command in privileged EXEC mode.

support virsh capabilities

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh capabilities 
<capabilities>
<host>
<uuid>eb7c9ce9-9df9-3142-898b-c84a16b10706</uuid>
<cpu>
<arch>x86_64</arch>
<model>Broadwell</model>
<vendor>Intel</vendor>
<topology sockets='1' cores='10' threads='2'/>
<feature name='vme'/>
<feature name='ds'/>
<feature name='acpi'/>
<feature name='ss'/>
<feature name='ht'/>
<feature name='tm'/>
<feature name='pbe'/>
<feature name='dtes64'/>
<feature name='monitor'/>
<feature name='ds_cpl'/>
<feature name='vmx'/>
<feature name='smx'/>
<feature name='est'/>
<feature name='tm2'/>
<feature name='xtpr'/>
<feature name='pdcm'/>
<feature name='dca'/>
<feature name='osxsave'/>
<feature name='f16c'/>
<feature name='rdrand'/>
<feature name='arat'/>
<feature name='tsc_adjust'/>
<feature name='cmt'/>
<feature name='xsaveopt'/>
<feature name='mbm_total'/>
<feature name='mbm_local'/>
<feature name='pdpe1gb'/>
<feature name='abm'/>
<feature name='invtsc'/>
<pages unit='KiB' size='4'/>
<pages unit='KiB' size='2048'/>
<pages unit='KiB' size='1048576'/>
</cpu>
<power_management>
<suspend_mem/>
<suspend_disk/>
<suspend_hybrid/>
</power_management>
<migration_features>
<live/>
<uri_transports>
<uri_transport>tcp</uri_transport>
<uri_transport>rdma</uri_transport>
</uri_transports>
</migration_features>
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>66995472</memory>
<pages unit='KiB' size='4'>16748868</pages>
<pages unit='KiB' size='2048'>0</pages>
<pages unit='KiB' size='1048576'>0</pages>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
</distances>
<cpus num='20'>
<cpu id='0' socket_id='0' core_id='0' siblings='0,20'/>
<cpu id='1' socket_id='0' core_id='1' siblings='1,21'/>
<cpu id='2' socket_id='0' core_id='2' siblings='2,22'/>
<cpu id='3' socket_id='0' core_id='3' siblings='3,23'/>
<cpu id='4' socket_id='0' core_id='4' siblings='4,24'/>
<cpu id='5' socket_id='0' core_id='8' siblings='5,25'/>
<cpu id='6' socket_id='0' core_id='9' siblings='6,26'/>
<cpu id='7' socket_id='0' core_id='10' siblings='7,27'/>
<cpu id='8' socket_id='0' core_id='11' siblings='8,28'/>
<cpu id='9' socket_id='0' core_id='12' siblings='9,29'/>
<cpu id='20' socket_id='0' core_id='0' siblings='0,20'/>
<cpu id='21' socket_id='0' core_id='1' siblings='1,21'/>
<cpu id='22' socket_id='0' core_id='2' siblings='2,22'/>
<cpu id='23' socket_id='0' core_id='3' siblings='3,23'/>
<cpu id='24' socket_id='0' core_id='4' siblings='4,24'/>
<cpu id='25' socket_id='0' core_id='8' siblings='5,25'/>
<cpu id='26' socket_id='0' core_id='9' siblings='6,26'/>
<cpu id='27' socket_id='0' core_id='10' siblings='7,27'/>
<cpu id='28' socket_id='0' core_id='11' siblings='8,28'/>
<cpu id='29' socket_id='0' core_id='12' siblings='9,29'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>67108864</memory>
<pages unit='KiB' size='4'>16777216</pages>
<pages unit='KiB' size='2048'>0</pages>
<pages unit='KiB' size='1048576'>0</pages>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='10'/>
</distances>
<cpus num='20'>
<cpu id='10' socket_id='1' core_id='0' siblings='10,30'/>
<cpu id='11' socket_id='1' core_id='1' siblings='11,31'/>
<cpu id='12' socket_id='1' core_id='2' siblings='12,32'/>
<cpu id='13' socket_id='1' core_id='3' siblings='13,33'/>
<cpu id='14' socket_id='1' core_id='4' siblings='14,34'/>
<cpu id='15' socket_id='1' core_id='8' siblings='15,35'/>
<cpu id='16' socket_id='1' core_id='9' siblings='16,36'/>
<cpu id='17' socket_id='1' core_id='10' siblings='17,37'/>
<cpu id='18' socket_id='1' core_id='11' siblings='18,38'/>
<cpu id='19' socket_id='1' core_id='12' siblings='19,39'/>
<cpu id='30' socket_id='1' core_id='0' siblings='10,30'/>
<cpu id='31' socket_id='1' core_id='1' siblings='11,31'/>
<cpu id='32' socket_id='1' core_id='2' siblings='12,32'/>
<cpu id='33' socket_id='1' core_id='3' siblings='13,33'/>
<cpu id='34' socket_id='1' core_id='4' siblings='14,34'/>
<cpu id='35' socket_id='1' core_id='8' siblings='15,35'/>
<cpu id='36' socket_id='1' core_id='9' siblings='16,36'/>
<cpu id='37' socket_id='1' core_id='10' siblings='17,37'/>
<cpu id='38' socket_id='1' core_id='11' siblings='18,38'/>
<cpu id='39' socket_id='1' core_id='12' siblings='19,39'/>
</cpus>
</cell>
</cells>
</topology>
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>+107:+107</baselabel>
<baselabel type='qemu'>+107:+107</baselabel>
</secmodel>
</host>
<guest>
<os_type>hvm</os_type>
<arch name='i686'>
<wordsize>32</wordsize>
<emulator>/usr/libexec/qemu-kvm</emulator>
<machine maxCpus='240'>pc-i440fx-rhel7.0.0</machine>
<machine canonical='pc-i440fx-rhel7.0.0' maxCpus='240'>pc</machine>
<machine maxCpus='240'>rhel6.0.0</machine>
<machine maxCpus='240'>rhel6.1.0</machine>
<machine maxCpus='240'>rhel6.2.0</machine>
<machine maxCpus='240'>rhel6.3.0</machine>
<machine maxCpus='240'>rhel6.4.0</machine>
<machine maxCpus='240'>rhel6.5.0</machine>
<machine maxCpus='240'>rhel6.6.0</machine>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/libexec/qemu-kvm</emulator>
</domain>
</arch>
<features>
<cpuselection/>
<deviceboot/>
<disksnapshot default='off' toggle='no'/>
<acpi default='on' toggle='yes'/>
<apic default='on' toggle='no'/>
<pae/>
<nonpae/>
</features>
</guest>
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/libexec/qemu-kvm</emulator>
<machine maxCpus='240'>pc-i440fx-rhel7.0.0</machine>
<machine canonical='pc-i440fx-rhel7.0.0' maxCpus='240'>pc</machine>
<machine maxCpus='240'>rhel6.0.0</machine>
<machine maxCpus='240'>rhel6.1.0</machine>
<machine maxCpus='240'>rhel6.2.0</machine>
<machine maxCpus='240'>rhel6.3.0</machine>
<machine maxCpus='240'>rhel6.4.0</machine>
<machine maxCpus='240'>rhel6.5.0</machine>
<machine maxCpus='240'>rhel6.6.0</machine>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/libexec/qemu-kvm</emulator>
</domain>
</arch>
<features>
<cpuselection/>
<deviceboot/>
<disksnapshot default='off' toggle='no'/>
<acpi default='on' toggle='yes'/>
<apic default='on' toggle='no'/>
</features>
</guest>
</capabilities>

support virsh cpu-stats

To display the CPU statistics for a domain, use the support virsh cpu-stats command in privileged EXEC mode.

support virsh cpu-stats domain

Syntax Description

domain

Specifies the domain name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh cpu-stats 1512149985.ROUTER 
Time used by the domain: 
cpu_time    : 55311955404 ns
system_time : 3910000000 ns
user_time   : 810000000 ns

support virsh domiflist

To display the list of interfaces in a domain, use the support virsh domiflist command in privileged EXEC mode.

support virsh domiflist domain

Syntax Description

domain

Specifies the domain name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh domiflist 2 
Interface  Type       Source     Model       MAC
-------------------------------------------------------
vnic2      bridge     wan-net    virtio      52:54:00:db:4d:10
vnic3      bridge     lan-net    virtio      52:54:00:8a:58:f5

support virsh dumpxml

To display the VM XML dump of the configuration file, use the support virsh dumpxml command in privileged EXEC mode.

support virsh dumpxml domain

Syntax Description

domain

Specifies the name or ID of the domain.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh dumpxml 2 
<domain type='kvm' id='2'>
  <name>1505948272.vmdk</name>
  <uuid>285b8c3f-9f10-4e6b-b9bc-e87caaf7d877</uuid>
  <memory unit='KiB'>4456448</memory>
  <currentMemory unit='KiB'>4456448</currentMemory>
  <vcpu placement='static' current='2'>8</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='17'/>
    <vcpupin vcpu='1' cpuset='16'/>
  </cputune>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch='x86_64' machine='pc-i440fx-rhel7.0.0'>hvm</type>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <pae/>
  </features>
  <cpu mode='host-passthrough'/>
  <clock offset='utc'/>
  <on_poweroff>restart</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/libexec/qemu-kvm</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='writethrough'/>
      <source file='/data/cisco/vm_lifecycle/volumes/285b8c3f-9f10-4e6b-b9bc-e87caaf7d877_0.img'/>
      <backingStore type='file' index='1'>
        <format type='qcow2'/>
        <source file='/data/cisco/vm_lifecycle/volumes/vwlc.vmdk_0.img'/>
        <backingStore/>
      </backingStore>
      <target dev='vda' bus='virtio'/>
      <alias name='virtio-disk0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </disk>
    <controller type='usb' index='0'>
      <alias name='usb'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pci-root'>
      <alias name='pci.0'/>
    </controller>
    <interface type='bridge'>
      <mac address='52:54:00:db:4d:10'/>
      <source network='wan-net' bridge='wan-br'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='ad1fb82a-b6c3-4f39-adc0-72788820e798'/>
      </virtualport>
      <target dev='vnic2'/>
      <model type='virtio'/>
      <alias name='net0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <interface type='bridge'>
      <mac address='52:54:00:8a:58:f5'/>
      <source network='lan-net' bridge='lan-br'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='58070073-58ab-4ec6-92e3-81da3f7468ad'/>
      </virtualport>
      <target dev='vnic3'/>
      <model type='virtio'/>
      <alias name='net1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </interface>
    <input type='mouse' bus='ps2'>
      <alias name='input0'/>
    </input>
    <input type='tablet' bus='usb'>
      <alias name='input1'/>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='keyboard' bus='ps2'>
      <alias name='input2'/>
    </input>
    <graphics type='vnc' port='5901' autoport='yes' listen='0.0.0.0'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <video>
      <model type='cirrus' vram='16384' heads='1' primary='yes'/>
      <alias name='video0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='none'/>
  </devices>
  <seclabel type='dynamic' model='selinux' relabel='yes'>
    <label>system_u:system_r:svirt_t:s0:c726,c919</label>
    <imagelabel>system_u:object_r:svirt_image_t:s0:c726,c919</imagelabel>
  </seclabel>
  <seclabel type='dynamic' model='dac' relabel='yes'>
    <label>+107:+107</label>
    <imagelabel>+107:+107</imagelabel>
  </seclabel>
</domain>

support virsh iface-list

To display a list of interfaces on the host, use the support virsh iface-list command in privileged EXEC mode.

support virsh iface-list

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh iface-list 
Name                 State      MAC Address
---------------------------------------------------
 eth0                 active     70:db:98:70:2f:6e
 int-mgmt-net-br      active     c6:13:e5:4d:e1:46
 lan-br               active     70:db:98:07:1f:35
 lo                   active     00:00:00:00:00:00
 wan-br               active     70:db:98:70:2f:6e

support virsh iface-dumpxml

To display the XML dump of an interface, use the support virsh iface-dumpxml command in privileged EXEC mode.

support virsh iface-dumpxml interface

Syntax Description

interface

Specifies the interface name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.7.1

This command was introduced.

Examples


nfvis# support virsh iface-dumpxml wan-br 
<interface type='ethernet' name='wan-br'>
   <protocol family='ipv4'>
     <ip address='172.19.181.196' prefix='24'/>
   </protocol>
   <protocol family='ipv6'>
     <ip address='2001:420:30d:200:72db:98ff:fe70:2f6e' prefix='64'/>
     <ip address='2001:420:30d:201:ffff:ffff:fffd:fa50' prefix='64'/>
     <ip address='fe80::72db:98ff:fe70:2f6e' prefix='64'/>
   </protocol>
   <link state='unknown'/>
   <mac address='70:db:98:70:2f:6e'/>
</interface>

support virsh list

To display a list of VM domains provisioned in the system, use the support virsh list command in privileged EXEC mode.

support virsh list

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh list 
Id    Name                           State
----------------------------------------------------
 2     1505948272.vmdk                running
 3     1505947515.raw                 running
 -     1505946928.iso                 shut off
 -     1505948274.iso2                shut off

support virsh memory-stats

To display the memory statistics for a domain, use the support virsh memory-stats command in privileged EXEC mode.

support virsh memory-stats domain

Syntax Description

domain

Specifies the domain name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh memory-stats name 1510771542.OTHER 
Memory used:
rss: 119808 KB

support virsh net-dumpxml

To display the XML dump of a network, use the support virsh net-dumpxml command in privileged EXEC mode.

support virsh net-dumpxml network

Syntax Description

network

Specifies the network name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh net-dumpxml wan-net 
<network connections='1'>
   <name>wan-net</name>
   <uuid>e51f65c5-fec4-4b3c-a7cd-540b748bde57</uuid>
   <forward mode='bridge'/>
   <bridge name='wan-br'/>
   <virtualport type='openvswitch'/>
</network>

support virsh net-list

To display a list of networks in the host, use the support virsh net-list command in privileged EXEC mode.

support virsh net-list

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh net-list 
Name                 State      Autostart     Persistent
----------------------------------------------------------
 int-mgmt-net         active     yes           yes
 lan-net              active     yes           yes
 wan-net              active     yes           yes

support virsh net-info

To display information about a network, use the support virsh net-info command in privileged EXEC mode.

support virsh net-info network

Syntax Description

network

Specifies the name of the network.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh net-info wan-net 
Name:           wan-net
UUID:           e51f65c5-fec4-4b3c-a7cd-540b748bde57
Active:         yes
Persistent:     yes
Autostart:      yes
Bridge:         wan-br

support virsh nodecpustats

To display the system-wide CPU statistics, use the support virsh nodecpustats command in privileged EXEC mode.

support virsh nodecpustats

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh nodecpustats 
usage:            0.1%
user:             0.0%
system:           0.0%
idle:           100.0%
iowait:           0.0%

support virsh pool-list

To display a list of all storage pools in the system, use the support virsh pool-list command in privileged EXEC mode.

support virsh pool-list

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh pool-list 
Name                 State      Autostart 
-------------------------------------------
 cisco_datastore1     active     no   

support virsh pool-dumpxml

To display the XML dump of a storage pool, use the support virsh pool-dumpxml command in privileged EXEC mode.

support virsh pool-dumpxml poolname

Syntax Description

poolname

Specifies the pool name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh pool-dumpxml cisco_datastore1 
<pool type='dir'>
  <name>cisco_datastore1</name>
  <uuid>51487524-16fe-40c9-a598-6384c914e191</uuid>
  <capacity unit='bytes'>2304488226816</capacity>
  <allocation unit='bytes'>256696770560</allocation>
  <available unit='bytes'>2047791456256</available>
  <source>
  </source>
  <target>
    <path>/data/cisco/vm_lifecycle/volumes</path>
    <permissions>
      <mode>0755</mode>
      <owner>0</owner>
      <group>0</group>
      <label>system_u:object_r:etc_runtime_t:s0</label>
    </permissions>
  </target>
</pool>

support virsh sys-info

To display the system information, use the support virsh sys-info command in privileged EXEC mode.

support virsh sys-info

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh sys-info 
Sys info: <sysinfo type='smbios'>
<bios>
<entry name='vendor'>Cisco Systems, Inc.</entry>
<entry name='version'>C220M4.2.0.13g.0.1113162259</entry>
<entry name='date'>11/13/2016</entry>
<entry name='release'>5.11</entry>
</bios>
<system>
<entry name='manufacturer'>Cisco Systems Inc</entry>
<entry name='product'>UCSC-C220-M4S</entry>
<entry name='version'>A0</entry>
<entry name='serial'>FCH2110V0DX</entry>
<entry name='uuid'>EB7C9CE9-9DF9-3142-898B-C84A16B10706</entry>
<entry name='sku'>Not Specified</entry>
<entry name='family'>Not Specified</entry>
</system>
<baseBoard>
<entry name='manufacturer'>Cisco Systems Inc</entry>
<entry name='product'>UCSC-C220-M4S</entry>
<entry name='version'>74-12419-02</entry>
<entry name='serial'>FCH2108JLC4</entry>
<entry name='asset'>Unknown</entry>
<entry name='location'>Not Specified</entry>
</baseBoard>
<processor>
<entry name='socket_destination'>CPU1</entry>
<entry name='type'>Central Processor</entry>
<entry name='family'>Xeon</entry>
<entry name='manufacturer'>Intel(R) Corporation</entry>
<entry name='signature'>Type 0, Family 6, Model 79, Stepping 1</entry>
<entry name='version'>Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz</entry>
<entry name='external_clock'>100 MHz</entry>
<entry name='max_speed'>4000 MHz</entry>
<entry name='status'>Populated, Enabled</entry>
<entry name='serial_number'>Not Specified</entry>
<entry name='part_number'>Not Specified</entry>
</processor>
<processor>
<entry name='socket_destination'>CPU2</entry>
<entry name='type'>Central Processor</entry>
<entry name='family'>Xeon</entry>
<entry name='manufacturer'>Intel(R) Corporation</entry>
<entry name='signature'>Type 0, Family 6, Model 79, Stepping 1</entry>
<entry name='version'>Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz</entry>
<entry name='external_clock'>100 MHz</entry>
<entry name='max_speed'>4000 MHz</entry>
<entry name='status'>Populated, Enabled</entry>
<entry name='serial_number'>Not Specified</entry>
<entry name='part_number'>Not Specified</entry>
</processor>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_A1</entry>
<entry name='bank_locator'>NODE 0 CHANNEL 0 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E462C9</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_B1</entry>
<entry name='bank_locator'>NODE 0 CHANNEL 1 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E4536B</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_C1</entry>
<entry name='bank_locator'>NODE 0 CHANNEL 2 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E4539A</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_D1</entry>
<entry name='bank_locator'>NODE 0 CHANNEL 3 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E4544B</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_E1</entry>
<entry name='bank_locator'>NODE 1 CHANNEL 0 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E468CE</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_F1</entry>
<entry name='bank_locator'>NODE 1 CHANNEL 1 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E44191</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_G1</entry>
<entry name='bank_locator'>NODE 1 CHANNEL 2 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E46927</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
<memory_device>
<entry name='size'>16384 MB</entry>
<entry name='form_factor'>DIMM</entry>
<entry name='locator'>DIMM_H1</entry>
<entry name='bank_locator'>NODE 1 CHANNEL 3 DIMM 0</entry>
<entry name='type'>DDR4</entry>
<entry name='type_detail'>Registered (Buffered)</entry>
<entry name='speed'>2400 MHz</entry>
<entry name='manufacturer'>0xCE00</entry>
<entry name='serial_number'>34E468D0</entry>
<entry name='part_number'>M393A2K40BB1-CRC</entry>
</memory_device>
</sysinfo>

support virsh vol-dumpxml

To display the XML dump of a volume, use the support virsh vol-dumpxml command in privileged EXEC mode.

support virsh vol-dumpxml poolname volumename

Syntax Description

poolname

Specifies the pool name.

volumename

Specifies the volume name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification
3.7.1

This command was introduced.

Examples


nfvis# support virsh vol-dumpxml cisco_datastore1 vwlc.vmdk_0.img 
<volume type='file'>
  <name>vwlc.vmdk_0.img</name>
  <key>/data/cisco/vm_lifecycle/volumes/vwlc.vmdk_0.img</key>
  <source>
  </source>
  <capacity unit='bytes'>8589934592</capacity>
  <allocation unit='bytes'>200704</allocation>
  <target>
    <path>/data/cisco/vm_lifecycle/volumes/vwlc.vmdk_0.img</path>
    <format type='qcow2'/>
    <permissions>
      <mode>0600</mode>
      <owner>107</owner>
      <group>107</group>
      <label>system_u:object_r:virt_content_t:s0</label>
    </permissions>
    <timestamps>
      <atime>1505921732.573554833</atime>
      <mtime>1505921559.789556401</mtime>
      <ctime>1505921732.494554834</ctime>
    </timestamps>
    <compat>1.1</compat>
    <features/>
  </target>
</volume>

support virsh vol-list

To display the list of interfaces in a domain, use the support virsh vol-list command in privileged EXEC mode.

support virsh vol-list poolname

Syntax Description

poolname

Specifies the pool name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support virsh vol-list cisco_datastore1 
Name                 Path                                    
------------------------------------------------------------------------------
 24ef7a32-4490-49ca-bbc8-c9a01ec20ae4_0.img /data/cisco/vm_lifecycle/volumes/24ef7a32-4490-49ca-bbc8-c9a01ec20ae4_0.img
 285b8c3f-9f10-4e6b-b9bc-e87caaf7d877_0.img /data/cisco/vm_lifecycle/volumes/285b8c3f-9f10-4e6b-b9bc-e87caaf7d877_0.img
 5db7f935-501b-4606-935b-bf650fefdc02_0.img /data/cisco/vm_lifecycle/volumes/5db7f935-501b-4606-935b-bf650fefdc02_0.img
 d4a8df33-3bc1-43db-9a82-b96dc8429fb3_0.img /data/cisco/vm_lifecycle/volumes/d4a8df33-3bc1-43db-9a82-b96dc8429fb3_0.img
 fattest_0.img        /data/cisco/vm_lifecycle/volumes/fattest_0.img
 TinyLinux.qcow2_0.img /data/cisco/vm_lifecycle/volumes/TinyLinux.qcow2_0.img
 vwlc.vmdk_0.img      /data/cisco/vm_lifecycle/volumes/vwlc.vmdk_0.img

support ovs all-info

To display the output of all supported ovs commands, use the support ovs all-info command in privileged EXEC mode.

support ovs all-info

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs all-info 
support ovs vsctl show
c23984a8-7379-445d-9ca3-0980bf1db317
    Bridge wan-br
        Port "vnic4"
            Interface "vnic4"
        Port wan-br
            Interface wan-br
                type: internal
        Port "vnic2"
            Interface "vnic2"
        Port "eth0"
            Interface "eth0"
        Port "vnic9"
            Interface "vnic9"
        Port "vnic0"
            Interface "vnic0"
    Bridge int-mgmt-net-br
        Port "vnic3"
            Interface "vnic3"
        Port int-mgmt-net-br
            Interface int-mgmt-net-br
                type: internal
    Bridge lan-br
        Port lan-br
            Interface lan-br
                type: internal
        Port "eth6"
            Interface "eth6"
        Port "eth7"
            Interface "eth7"
        Port "eth4"
            Interface "eth4"
        Port "eth2"
            Interface "eth2"
        Port "eth1"
            Interface "eth1"
        Port "vnic8"
            Interface "vnic8"
        Port "eth5"
            Interface "eth5"
        Port "vnic1"
            Interface "vnic1"
        Port "eth3"
            Interface "eth3"
    ovs_version: "2.5.2"
support ovs vsctl list-br
int-mgmt-net-br
lan-br
wan-br
...

support ovs appctl fdb-show

To display information about the ports of a bridge , use the support ovs appctl fdb-show command in privileged EXEC mode.

support ovs appctl fdb-show bridge

Syntax Description

bridge

Specifies the bridge name.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs appctl fdb-show wan-br 
port  VLAN  MAC                Age
    1     0  00:24:14:de:0f:b0  275
    1     0  00:19:2f:bc:f9:40  271
    1     0  b4:14:89:cb:7a:18  252
    1     0  a8:9d:21:04:2c:a1  228
    1     0  c4:71:fe:60:51:40  211
    1     0  00:d0:c9:bd:b1:ca  187
    1     0  00:0c:29:25:71:45  176
    1     0  0c:4d:e9:c7:14:eb  176
    1     0  ac:87:a3:01:5d:38  175
    1     0  00:1a:a1:21:a9:08  172
    1     0  00:17:08:50:27:9b  153
    1     0  00:50:56:87:24:11  150
    1     0  00:1a:a1:df:48:70  143
    1     0  00:6b:f1:25:13:f0  139
    1     0  00:78:88:50:95:40  139
    1     0  00:03:ba:85:a1:16  123
    1     0  00:11:92:fa:07:d1  123
    1     0  50:57:a8:e1:5f:48  122
    1     0  70:db:98:c3:fb:00  110
    1     0  a8:9d:21:f4:74:10  110
    1     0  50:3d:e5:9d:5a:a8  107
    1     0  00:17:95:42:67:e0  106
    1     0  00:50:56:8b:01:37  105
    1     0  a8:9d:21:ce:de:50   81
    1     0  fa:9d:46:a0:61:ce   80
    1     0  6c:ae:8b:15:f3:c6   61
    1     0  4c:4e:35:44:25:ca   59
    1     0  80:e0:1d:37:1c:68   54
    1     0  00:f2:8b:c3:97:70   52
    1     0  a2:6e:e7:10:a1:bb   50
    1     0  00:6b:f1:25:13:fc   50
    1     0  44:2b:03:16:db:83   50
    1     0  80:e0:1d:36:e3:7d   50
    1     0  d8:b1:90:40:7a:0f   49
    1     0  70:db:98:70:0a:d9   47
    1     0  a8:9d:21:93:65:06   46
    1     0  bc:f1:f2:da:f9:41   40
    1     0  5c:f3:fc:2b:2d:79   35
    1     0  70:db:98:6f:fb:c0   33
    1     0  ce:b2:05:54:47:82   32
    1     0  84:b8:02:b8:5a:fc   32
    1     0  00:f2:8b:c3:97:7c   32
    1     0  10:05:ca:9d:8a:21   31
    1     0  d4:6d:50:cf:9e:8d   31
    1     0  84:b8:02:5b:cd:d9   29
    1     0  00:1e:be:10:81:9a   29
    1     0  80:e0:1d:37:2a:80   27
    6     0  52:54:00:82:95:43   26
    1     0  f8:66:f2:da:0a:80   26
    1     0  da:eb:ea:3f:ed:04   25
    1     0  50:3d:e5:17:b4:00   23
    1     0  e4:c7:22:f0:16:f9   16
    1     0  a8:9d:21:ce:de:4b   15
    1     0  00:1d:70:7e:5d:80   14
    1     0  f8:0b:cb:d6:a6:d5   14
    1     0  00:6b:f1:25:13:7c   14
    1     0  70:db:98:6f:fb:bb   14
    1     0  d4:6d:50:cf:c1:81   13
    1     0  80:e0:1d:36:e3:82   13
    1     0  a8:9d:21:93:65:02   11
    1     0  00:b0:64:fd:06:87   11
    1     0  d4:6d:50:cf:c1:86   11
    1     0  70:db:98:c3:fa:80   10
    1     0  70:db:98:c3:f9:68   10
    9     0  52:54:00:85:8a:7a   10
    1     0  bc:f1:f2:da:f9:04    9
    1     0  00:0c:29:3d:50:1e    7
    1     0  00:0c:29:3d:50:0a    7
    1     0  52:54:00:54:78:e4    7
    1     0  d6:b2:96:90:eb:25    6
    1     0  84:b8:02:b8:5a:f7    5
    1     0  00:6b:f1:25:13:fd    5
    1     0  00:0d:60:84:1e:c0    5
    1     0  00:25:45:0e:c3:c0    5
    1     0  00:05:73:a0:00:08    2
    1     0  00:25:b4:47:44:00    0
    1     0  00:09:e6:00:39:d6    0
    1     0  68:bc:0c:5b:cb:01    0
    1     0  00:00:0c:9f:f0:06    0
LOCAL     0  70:db:98:70:2f:6e    0
    1     0  3c:ce:73:da:60:00    0
    1     0  00:05:73:a0:00:01    0
    1     0  00:00:0c:9f:f0:15    0

support ovs dpctl show

To display an overview of the database contents, use the support ovs dpctl show command in privileged EXEC mode.

support ovs dpctl show

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs dpctl show 
system@ovs-system:
 lookups: hit:9883843 missed:715875 lost:0
 flows: 27
 masks: hit:38834243 total:4 hit/pkt:3.66
 port 0: ovs-system (internal)
 port 1: eth4
 port 2: eth5
 port 3: eth3
 port 4: eth1
 port 5: eth7
 port 6: eth6
 port 7: lan-br (internal)
 port 8: eth2
 port 9: eth0
 port 10: wan-br (internal)
 port 11: int-mgmt-net-br (internal)
 port 12: vnic0
 port 13: vnic1
 port 14: vnic2
 port 15: vnic3
 port 16: vnic4
 port 17: vnic5
 port 18: vnic6
 port 19: vnic7

support ovs ofctl dump-ports

To display the port statistics, use the support ovs ofctl dump-ports command in privileged EXEC mode.

support ovs ofctl dump-ports bridge

Syntax Description

bridge

Specifies the name of the bridge.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs ofctl dump-ports wan-br 
OFPST_PORT reply (xid=0x2): 6 ports
  port 10: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=513, bytes=80488, drop=5259654, errs=0, coll=0
  port  8: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=2280, bytes=365070, drop=6185138, errs=0, coll=0
  port  6: rx pkts=2315, bytes=97662, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=3153581, bytes=501088395, drop=31404, errs=0, coll=0
  port  1: rx pkts=14451444, bytes=3479151791, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=1450836, bytes=167179629, drop=0, errs=0, coll=0
  port LOCAL: rx pkts=8318452, bytes=11458196810, drop=6920, errs=0, frame=0, over=0, crc=0
           tx pkts=1416016, bytes=164944277, drop=0, errs=0, coll=0
  port  9: rx pkts=892, bytes=51312, drop=0, errs=0, frame=0, over=0, crc=0
           tx pkts=2940893, bytes=467376770, drop=54234, errs=0, coll=0

support ovs ofctl dump-ports-desc

To display the port descriptions, use the support ovs ofctl dump-ports-desc command in privileged EXEC mode.

support ovs ofctl dump-ports-desc bridge

Syntax Description

bridge

Specifies the name of the bridge.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs ofctl dump-ports-desc wan-br 
OFPST_PORT_DESC reply (xid=0x2):
 1(eth0): addr:70:db:98:70:2f:6e
     config:     0
     state:      0
     current:    1GB-FD COPPER AUTO_NEG
     advertised: 10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG
     supported:  10MB-HD 10MB-FD 100MB-HD 100MB-FD 1GB-FD COPPER AUTO_NEG AUTO_PAUSE
     speed: 1000 Mbps now, 1000 Mbps max
 6(vnic2): addr:fe:54:00:82:95:43
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max
 8(vnic1): addr:fe:54:00:3a:f1:c0
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max
 9(vnic3): addr:fe:54:00:85:8a:7a
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max
 10(vnic6): addr:fe:54:00:e4:a3:3a
     config:     0
     state:      0
     current:    10MB-FD COPPER
     speed: 10 Mbps now, 0 Mbps max
 LOCAL(wan-br): addr:70:db:98:70:2f:6e
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max

support ovs vsctl list-br

To display the names of all bridges, use the support ovs vsctl list-br command in privileged EXEC mode.

support ovs vsctl list-br

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs vsctl list-br 
int-mgmt-net-br
lan-br
wan-br

support ovs vsctl list interface

To display information about a specific interface or all interfaces, use the support ovs vsctl list interface command in privileged EXEC mode.

support ovs vsctl list interface interface

Syntax Description

interface

Specifies the interface name.

Command Default

Displays information about all interfaces.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs vsctl list interface wan-br 
_uuid               : be31801b-9729-41c4-8053-52534a59a9c4
admin_state         : up
bfd                 : {}
bfd_status          : {}
cfm_fault           : []
cfm_fault_status    : []
cfm_flap_count      : []
cfm_health          : []
cfm_mpid            : []
cfm_remote_mpids    : []
cfm_remote_opstate  : []
duplex              : []
external_ids        : {}
ifindex             : 12
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current        : []
link_resets         : 1
link_speed          : []
link_state          : up
mac                 : []
mac_in_use          : "70:db:98:70:2f:6e"
mtu                 : 1500
name                : wan-br
ofport              : 65534
ofport_request      : []
options             : {}
other_config        : {}
statistics          : {collisions=0, rx_bytes=11457008582, rx_crc_err=0, rx_dropped=6907, rx_errors=0, rx_frame_err=0, 
rx_over_err=0, rx_packets=8310154, tx_bytes=164896735, tx_dropped=0, tx_errors=0, tx_packets=1415893}
status              : {driver_name=openvswitch}
type                : internal

support ovs vsctl list-ports

To display the names of all ports on a bridge , use the support ovs vsctl list-ports command in privileged EXEC mode.

support ovs vsctl list-ports bridge

Syntax Description

bridge

Specifies the bridge name.

Command Default

None.

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs vsctl list-ports wan-br 
eth0
vnic1
vnic2
vnic3
vnic6

support ovs vsctl show

To display an overview of the database contents, use the support ovs vsctl show command in privileged EXEC mode.

support ovs vsctl show

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Privileged EXEC (#)

Command History

Release Modification

3.7.1

This command was introduced.

Examples

nfvis# support ovs vsctl show 
c9c52c5d-d0f3-4d8d-9ee2-ebd9728b83a6
    Bridge wan-br
        Port "vnic2"
            Interface "vnic2"
        Port "vnic3"
            Interface "vnic3"
        Port wan-br
            Interface wan-br
                type: internal
        Port "eth0"
            Interface "eth0"
        Port "vnic6"
            Interface "vnic6"
        Port "vnic1"
            Interface "vnic1"
    Bridge int-mgmt-net-br
        Port "vnic0"
            Interface "vnic0"
        Port int-mgmt-net-br
            Interface int-mgmt-net-br
                type: internal
        Port "vnic5"
            Interface "vnic5"
    Bridge lan-br
        Port "vnic4"
            Interface "vnic4"
        Port "eth3"
            Interface "eth3"
        Port "eth4"
            Interface "eth4"
        Port lan-br
            Interface lan-br
                type: internal
        Port "eth2"
            Interface "eth2"
        Port "eth7"
            Interface "eth7"
        Port "eth1"
            Interface "eth1"
        Port "eth5"
            Interface "eth5"
        Port "vnic7"
            Interface "vnic7"
        Port "eth6"
            Interface "eth6"
    ovs_version: "2.3.2"