Troubleshooting Cisco APIC QoS Policies
The following table summarizes common troubleshooting scenarios for Cisco APIC QoS.
Problem |
Solution |
---|---|
Unable to update a configured QoS policy. |
|
Show QoS interface statistics. |
CLI displays statistics for eth1/1 for only QoS classes – level1, leve2, level3, level4, level5, level6, and policy-plane – if you don’t use “detail” option.
If you want to display statistics for control-plane and span classes for an interface, you need to use CLI with the “detail” option. Example: fabric 107 show queuing interface ethernet 1/1 detail
|