Cisco Nexus 5000 Series NX-OS FabricPath Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 20, 2015

Chapter: D Commands

description (FabricPath)

D Commands

This chapter describes the Cisco NX-OS FabricPath commands that begin with D.

description (FabricPath)

To configure the topology description, use the description command.

description desc

no description desc

Syntax Description


desc	Line description. The maximum size is 80 bytes.

Command Default

None

Command Modes

Global configuration mode

Command History


Release	Modification
5.1(3)N1(1)	This command was introduced.

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to configure the topology description:

switch# configure terminal

switch#(config)# description FabricPath Topology 50 Configuration

switch#(config)#

Related Commands


Command	Description
fabricpath domain default	Enables FabricPath Layer 2 IS-IS.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)