Obtaining Hardware
Each Cisco UCS X440p PCIe Node interoperates with other required hardware to provide GPU processing offload and acceleration for the Cisco UCS X-Series compute node that is paired with it.
The following table shows the required hardware to support a fully functioning PCIe node. Use the following table when you want to order spares or additional PCIe nodes to scale out your Cisco UCS X-Fabric deployment.
 Note |
Power cables are required and ship with the riser cages. |
|
Hardware Component |
Description |
Cisco PID |
|---|---|---|
|
Chassis |
UCS X-Series Server Chassis, for example the Cisco UCS X9508 Server Chassis |
UCSX-9508 |
|
Compute Nodes |
UCS X-Series Compute Nodes, for example, the Cisco UCS X210c M6 Compute Node |
UCSX-210C-M6 UCSX-210C-M7 UCSX-410C-M7 |
|
PCIe Nodes |
UCS X-Series Gen4 PCIe node, for example the Cisco UCS X440p Front Mezzanine PCIe Node |
UCSX-440P |
|
PCIe Node Riser Cage, FHFL GPU |
Riser A for one dual slot GPU per riser, |
UCSX-RIS-A-440P |
|
PCIe Node Riser Cage, HHHL GPU |
Riser B for two single slot GPUs per riser |
UCSX-RIS-B-440P |
|
PCIe Node Riser Blank (filler panel) |
PCIe blank for UCS X-series 440P PCIe node |
UCSX-RIS-BLK-440P |
|
PCIe Node GPUs, HHHL |
NVIDIA L4 Tensor Core, 70W, 24 GB |
UCSX-GPU-L4 |
|
NVIDIA T4 PCIE 75W 16GB |
UCSX-GPU-T4-16 |
|
|
Intel GPU Flex 140, Gen4x8, 75W PCIe |
UCSX-GPU-FLEX140 |
|
|
PCIe Node GPU, HHFL |
Intel GPU Flex 170, Gen4 x16, 150W PCIe |
UCSX-GPU-FLEX170 |
|
PCIe Node GPUs, FHFL |
NVIDIA A16 PCIe 250W 4X16GB |
UCSX-GPU-A16 |
|
TESLA A40 RTX, Passive, 300W, 48GB |
UCSX-GPU-A40 |
|
|
NVIDIA L40 300W, 48GB |
UCSX-GPU-L40 This PID comes with a power cable included. |
|
|
TESLA A100, Passive, 300W, 80GB |
UCSX-GPU-A100-80 |
|
|
NVIDIA Tesla H100, Passive, 350W, 80 GB |
UCSX-GPU-H100-80 |
|
|
Cisco UCS X-Fabric Modules (XFMs) |
UCS 9416 X-Fabric module for 9508 chassis Must be deployed as a pair, so two are required per Cisco X-Series Server chassis |
UCSX-F-9416 |
|
Rear Mezzanine Card |
UCS PCI Mezz card for X-Fabric Connectivity Required for Cisco UCS X-Series compute nodes (for example, the Cisco UCS X210c M6 Compute Node) |
UCSX-V4-PCIME |
Feedback