- Welcome to Cisco Unified SIP Proxy
- Documentation Roadmap for Cisco Unified SIP Proxy Release 9.0
- Configuring SIP Stacks
- Configuring Networks
- Configuring Triggers
- Configuring Server Groups
- Configuring Route Groups
- Configuring Route Tables
- Configuring Route Policies
- Configuring Normalization Policies
- Configuring Time Policies
- Configuring Routing Triggers
- Configuring Normalization Triggers
- Configuring Performance Control
- Configuring Call Admission Control
- Configuring Users
- Setting User Defaults
- Configuring Groups
- Configuring Privileges
- Configuring Authentication, Authorization, and Accounting
- Displaying System Information
- Configuring Domain Name Settings
- Configuring Network Time and Time Zone Settings
- Configuring SNMP Settings
- Configuring the System Login Banner
- Monitoring the Cisco Unified SIP Proxy System
- Viewing Reports
- Configuring Backup and Restore
- Using the Administration Control Panel
- Managing the System Configuration
- Smart License
- Troubleshooting
- Error Messages
Configuring Network Time and Time Zone Settings
You must add an NTP server to your Cisco Unified SIP Proxy system and configure the time zone to ensure that voicemails and system processes have the correct date and time associated with them.
Adding an NTP Server
You can have a maximum of three NTP servers.
Step 1 Choose System > Network Time & Time Zone Settings.
The system displays the Network Time & Time Zone Settings page.
The system displays the Add a NTP Server page.
Step 3 Enter the hostname or IP address of the NTP server. To make it the primary NTP server, check the Preferred check box.
The system displays the Network Time and Time Zone Settings page with the new server listed in the table.
Save and then reload the configuration. See Using the Administration Control Panel .
Back to the Configuring Network Time and Time Zone Settings menu page
Removing an NTP Server
Step 1 Choose System > Network Time & Time Zone Settings.
The system displays the Network Time & Time Zone Settings page.
Step 2 Check the check box next to the NTP server to remove.
Step 4 Click OK at the prompt.
Save and then reload the configuration. See Using the Administration Control Panel .
Back to the Configuring Network Time and Time Zone Settings menu page
Setting an NTP Server as the Preferred Server
You must have at least two NTP servers.
Step 1 Choose System > Network Time & Time Zone Settings.
The system displays the Network Time & Time Zone Settings page.
Step 2 Check the check box next to the NTP server to set as the preferred server.
Save and then reload the configuration. See Using the Administration Control Panel .
Back to the Configuring Network Time and Time Zone Settings menu page
Changing the Time Zone
Step 1 Choose System > Network Time & Time Zone Settings.
The system displays the Network Time & Time Zone Settings page.
Step 2 Use the drop-down menu to select the correct country.
Step 3 Use the drop-down menu to select the correct time zone.
Step 5 Click OK at the information prompt.
Save and then reload the configuration. See Using the Administration Control Panel .
Back to the Configuring Network Time and Time Zone Settings menu page