Command Line Interface Reference, Modes I - Q, StarOS Release 21.11

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: November 28, 2018

Chapter: PCC-Service Addon Configuration Mode Commands

PCC-Service Addon Configuration Mode Commands
associate-addon-state
description
duration
end
exit
status active
time-allowance
volume-allowance

PCC-Service Addon Configuration Mode Commands

The PCC-Service Configuration Mode is used to link, consolidate and manage the policy logic for the network. It defines the authorization of resources for a subscriber's data usage under various conditions and policies in the PCC-service.

Important

This configuration mode is supported from StarOS Release 15.0 onwards.

Important

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

associate-addon-state

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

associate-addon-state   {expired  | grace  | not-started  | started } {action-set  act_set_name [notification-template  not_temp_name] | notification-template  not_temp_name}    
no  associate-addon-state  {expired  | grace  | not-started  | started }

no

Removes the configured associated addon state from this PCC service addon instance for IPCF configuration.

expired

grace

not-started

started

action-set `act_set_name`

The act_set_name must be an alphanumerical string from 1 through 63 characters.

notification-template `not_temp_name`

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt:

[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service.

action-set  pcc_act1

Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service.

no action-set  pcc_act1

description

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set  act_set_name [-noconfirm ] 
no  action-set  act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

`act_set_name`

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt:

[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service.

action-set  pcc_act1

Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service.

no action-set  pcc_act1

duration

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set  act_set_name [-noconfirm ] 
no  action-set  act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

`act_set_name`

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt:

[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service.

action-set  pcc_act1

Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service.

no action-set  pcc_act1

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

status active

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set  act_set_name [-noconfirm ] 
no  action-set  act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

`act_set_name`

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt:

[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service.

action-set  pcc_act1

Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service.

no action-set  pcc_act1

time-allowance

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set  act_set_name [-noconfirm ] 
no  action-set  act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

`act_set_name`

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt:

[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service.

action-set  pcc_act1

Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service.

no action-set  pcc_act1

volume-allowance

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set  act_set_name [-noconfirm ] 
no  action-set  act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

`act_set_name`

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt:

[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service.

action-set  pcc_act1

Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service.

no action-set  pcc_act1

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)