PCC-Service Addon Configuration Mode Commands

The PCC-Service Configuration Mode is used to link, consolidate and manage the policy logic for the network. The Addon mode specifies the commands related to addon instances for PCC-service.


Important
This configuration mode is supported from StarOS Release 15.0 onwards.

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Entering the above command sequence results in the following prompt:

[context_name]host_name(config-pcc-addon)#

Important

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).


Important

For information on common commands available in this configuration mode, refer to the Common Commands chapter.

associate-addon-state

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

associate-addon-state  {expired | grace | not-started | started} {action-set act_set_name [notification-template not_temp_name] | notification-template not_temp_name}    
no associate-addon-state {expired | grace | not-started | started}

no

Removes the configured associated addon state from this PCC service addon instance for IPCF configuration.

expired

grace

not-started

started

action-set act_set_name

The act_set_name must be an alphanumerical string from 1 through 63 characters.

notification-template not_temp_name

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt: 
[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service. 
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service. 
no action-set pcc_act1

description

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set act_set_name [-noconfirm] 
no action-set act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

act_set_name

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt: 
[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service. 
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service. 
no action-set pcc_act1

duration

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set act_set_name [-noconfirm] 
no action-set act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

act_set_name

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt: 
[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service. 
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service. 
no action-set pcc_act1

status active

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set act_set_name [-noconfirm] 
no action-set act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

act_set_name

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt: 
[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service. 
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service. 
no action-set pcc_act1

time-allowance

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set act_set_name [-noconfirm] 
no action-set act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

act_set_name

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt: 
[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service. 
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service. 
no action-set pcc_act1

volume-allowance

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > Addon Configuration

configure > context context_name > pcc-service service_name > addon addon_name

Syntax

action-set act_set_name [-noconfirm] 
no action-set act_set_name

no

Removes the configured PCC-Action-Set from this PCC-service instance for IPCF configuration.

act_set_name

Identifies the name of the PCC-Action-Set which is to be created or modified through this command.

The act_set_name must be an alphanumerical string from 1 through 63 characters.

-noconfirm

Indicates that the command is to execute without any additional prompt and confirmation from the user.

Usage Guidelines

Use this command to create/remove/configure an action-set in a PCC-service instance for IPCF Configuration.

An Action-set indicates the policy and charging as well as event generation related decisions that will get activated when the corresponding Condition-Group is evaluated to TRUE within a subscriber policy/profile.

A maximum of 512 PCC-Action-Sets can be configured in 1 instance of PCC-Service.

Entering this command results in the following prompt: 
[context_name]hostname(config-pcc-action-set)

Important

For more information on PCC-Action-Set configuration, refer PCC-Action-Set Configuration Mode Commands.

Example

Following command creates a PCC-action-set named pcc_act1 with in a PCC-service. 
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named pcc_act1 from a PCC-service. 
no action-set pcc_act1