Feature Defaults
The following table indicates what features are enabled or disabled by default.
Feature |
Default |
---|---|
Address Hold Timer Support |
Disabled - Configuration Required |
Bulkstats to Print Summarized PGW Roaming Data Rate |
Enabled-Always-On |
Bulk Busyout IP Pools based on VRFs |
Disabled - Configuration Required to Enable |
Clear Address Hold Timer for IP Pools |
|
Collision Handling of Modify Bearer Request over Modify Bearer Request Drop and Retry |
Disabled - Configuration Required |
Configuring ACL SRP Checkpoint |
Disabled - Configuration Required |
Differential Charging with 5G NSA |
Disabled - Configuration Required |
Dynamic S-GW Selection for Interworking-5GC |
Disabled - Configuration Required |
Encrypt AES-GCM-256 Algorithm |
Disabled - Configuration Required |
EPS to 5Gs Mobility Procedure without n1 Mode Support |
Enabled-Always-On |
Fetching the Target eNB based on the Target en-gNB ID without TAC |
Enabled - Always-on |
Handling CC-Request-Number AVP during Assume Positive State |
Disabled - Configuration Required |
Handling Simultaneous Gy RARs from Different DRAs with Different RGs |
Disabled - Configuration Required |
Handling Duplicate eNodeB Path |
Disabled - Configuration Required |
Handling of 5G to 4G TAU when n1-mode is not Supported |
Disabled - Configuration Required |
IMSI Privacy on ePDG |
Disabled – Configuration Required |
IP Source Violation |
Disabled - Configuration Required |
NAT Port Chunk Hold Timer |
Disabled - Configuration Required |
Prioritizing IMEI over MAC Address |
Disabled - Configuration Required |
Processing APCO IE on Unsupported Container ID |
Disabled - Configuration Required |
Public Warning System Failure and Restart Indication Support on SBc Interface |
Enabled - Configuration Required |
QCI67 Support |
Enabled - Always-on |
Send 5G User Location Information to SMF+PGW-c |
Disabled – Configuration Required |
Separate Counters for All EAP Type for Success and Failur Events |
Enabled - Always-on |
Support for DH group 5 Encryption under IKESA and IPSEC Transform Set |
Disabled – Configuration Required |
Subscriber Session Continuation at SaMOG During Wi-Fi Frequency Band Change |
Enabled - Always-on |
TMSI Based NRI Container IE |
Disabled - Configuration Required |
TEID Collision with ULI Change |
Disabled - Configuration Required |
UE-Usage-Type based P-GW Selection in ePDG |
Disabled - License not Required |
UE Radio Capability IE Size |
Disabled – Configuration Required to Enable |
VLAN-aware VMs |
Disabled - Configuration Required |