この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
シャーシ ディスカバリ ポリシーは、新しい Cisco UCS S3260 シャーシ または既存のスタンドアロン Cisco UCS S3260 シャーシ を Cisco UCS システムに追加した際のシステムによる対応方法を規定します。 Cisco UCS S3260 システム アーキテクチャの概要 では、Cisco UCS Managerが管理するCisco UCS S3260 システムの接続を説明します。Cisco UCS Managerは、システム I/O コントローラ(SIOC)からファブリック ポート チャネルのファブリック インターコネクトへのリンクをグループ化するかどうかの決定にシャーシ ディスカバリ ポリシーの設定を使用します。
以前のスタンドアロン Cisco UCS S3260 シャーシ を Cisco UCS システムに追加するには、最初に工場出荷時のデフォルトに設定する必要があります。これにより、シャーシの両 SIOC を両方のファブリック インターコネクトに接続できます。シャーシの SIOC をファブリック インターコネクトに接続し、ポートをサーバ ポートとしてマークすると、シャーシ ディスカバリが開始されます。
Cisco UCS S3260 シャーシ が検出されると、Cisco UCS Manager は Cisco UCS S3260 サーバ ノードを自動的に検出します。
(注) | サーバ ディスカバリはサーバに対応する SIOC が存在しない場合、失敗します。 |
Cisco UCS S3260 シャーシ を FEX 経由で Cisco UCS 6200 シリーズ ファブリック インターコネクトに接続、または Cisco UCS 6300 シリーズ ファブリック インターコネクトに直接接続する場合、Cisco UCS Manager は [Port Channel] のプリファレンスを無視し、SIOC は、非ポート チャネル モードで動作します。
Cisco UCS S3260 シャーシ を Cisco UCS 6200 シリーズ ファブリック インターコネクトに直接接続すると、リンクのグループ化を使用して、シャーシの検出時に SIOC からファブリック インターコネクトへのすべてのリンクがファブリック ポート チャネルにグループ化されているかどうかを判断できます。リンクのグループ化を [Port Channel] に優先設定している場合、SIOC からファブリック インターコネクトへのリンクがすべてファブリック ポート チャネルにグループ化されます。[None] に設定すると、SIOC からのリンクはファブリック インターコネクトにピン接続されます。
Cisco UCS S3260 シャーシ が 4x10G ブレークアウト ケーブルを介して Cisco UCS 6200 シリーズ ファブリック インターコネクトに接続されている場合、リンクのグループ化プリファレンスを [Port Channel] に設定します。これを行わないと、シャーシ ディスカバリは完了しません。
Cisco UCS S3260 シャーシ がシングル 10G ケーブルを介してファブリック インターコネクトに接続されている場合、リンクのグループ化プリファレンスを [None] に設定します。
Cisco UCS Manager GUI の [Link Group Preference] 値を変更した後、変更を有効にするには、Cisco UCS S3260 シャーシ の稼働を中止してから再稼働させます。
Cisco UCS ドメイン では、他のシャーシが [Port Channel] モードで稼働している場合、次を実行します。
特性のシャーシのファブリック ポート チャネルの接続をカスタマイズするには、シャーシ接続ポリシーを設定します。
シャーシ接続ポリシーは、特定のシャーシがシャーシ ディスカバリ後にファブリック ポート チャネルに含められるかどうかを決定します。このポリシーは、グローバル シャーシ ディスカバリ ポリシーで指定したのとは異なる方法で 1 つ以上のシャーシを設定する場合に役立ちます。
デフォルトでは、シャーシ接続ポリシーはグローバルに設定されます。これはつまり、接続制御はシャーシが新しく検出されたときに、シャーシ ディスカバリ ポリシーに設定された内容を使用して設定されることを意味しています。シャーシが検出されると、接続制御が「なし」と「ポート チャネル」のどちらに設定されるかを、シャーシ接続ポリシーが制御します。
(注) | シャーシ接続ポリシーは、Cisco UCS Manager によって、ハードウェア設定がファブリック ポート チャネルをサポートする場合にだけ作成されます。 |
次の表に、FC/FCoE のさまざまな接続とメディア タイプのサポートを示します。
FI |
接続 |
サポート |
ポート チャネル |
FC/FCoE |
---|---|---|---|---|
63xx |
直接接続 40 GB |
対応 |
非対応 |
対応 |
63xx |
直接接続 10 GB – QSA |
対応 ブレークアウトを使用しない |
非対応 |
対応 |
63xx |
直接接続 4x10 GB – ブレイクアウト |
非対応 |
該当なし |
該当なし |
63xx |
2348UPQ FEX - 10 GB – QSA |
対応 |
非対応 |
対応 |
63xx |
2348UPQ FEX - 4x10 GB - ブレークアウト |
非対応 |
該当なし |
該当なし |
62xx |
直接接続 – 4x10 GB - ブレークアウト ケーブル |
対応 |
ポリシー駆動ですが、非ポート チャネルはサポートされる構成ではありません |
非対応 |
62xx |
直接接続 – 10 GB – QSA |
対応 |
ポリシー駆動 |
対応。非ポート チャネル シャーシ ディスカバリ ポリシーの場合 |
62xx |
2232 FEX - 10 GB - QSA |
対応 |
非対応 |
対応 |
62xx |
2232xx - 4x10 GB - ブレークアウト ケーブル |
非対応 |
該当なし |
該当なし |
6324 |
直接接続 - 40 GB |
非対応 |
該当なし |
該当なし |
6324 |
直接接続 - 10 GB – QSA |
非対応 |
該当なし |
該当なし |
注意 | シャーシの接続モードを変更すると、シャーシの稼働が停止し、再稼働することになります。その間トラフィックが中断されます。 |