高可用性の基本的な展開のワークフロー
次のワークフロー図に、高可用性の基本的な IM and Presence Service 展開を設定するためのおおまかな手順を示します。基本設定後は、ユーザは基本的な IM 機能、プレゼンス、およびアド ホック グループ チャットなどの IM およびアベイラビリティの中心的な機能にアクセスできます。オプション機能は、ユーザ機能を強化するように設定できます。
より高度な展開シナリオとワークフローについては、電話利用状況の設定およびフェデレーションを含むワークフローに関するトピックを参照してください。
次の表に、ワークフローの各タスクについて説明します。
ヒント |
IM and Presence Service ノードをインストールまたは設定する場合は、次のすべての準備タスクを実行します。展開オプションおよび計画要件に関連するトピックを確認します。 |
タスク |
説明 |
|||
---|---|---|---|---|
1 |
インストール |
詳細なインストール手順については、『Cisco Unified Communications Manager のインストール』を参照してください。 |
||
2 |
サービスのアクティブ化 |
ノードをインストールした後に手動で機能サービスをアクティブ化する必要があります。詳細な手順については、『Cisco Unified Communications Manager のインストール』を参照してください。
|
||
3 |
Cisco Unified Communications Manager との LDAP ディレクトリの統合 |
IM and Presence Service ノードの LDAP ディレクトリ統合をセットアップします。
|
||
4 |
エンド ユーザのセットアップ |
IM and Presence Service 展開のノードおよびプレゼンス冗長グループにユーザを割り当てます。IM and Presence Service 展開のノードには手動または自動でユーザを割り当てることができます。ユーザを割り当てる手順については『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。User Assignment Mode for Presence Server の [エンタープライズ パラメータ(Enterprise Parameter)] を使用して、ユーザ割り当てモードを、バランス、アクティブ/スタンバイ、またはなしに設定します。
|
||
5 |
サードパーティ製 XMPP クライアントの統合 |
(任意)Cisco Jabber を使用しない場合は、サードパーティ製 XMPP クライアントを統合します。 |
||
6 |
LDAP ディレクトリのクライアントの統合 |
LDAP ディレクトリとのユーザの統合の設定:
|
||
7 |
クラスタ通信とクライアントのログインが可能かどうかの検証 |
クラスタ内で IM とアベイラビリティをやりとりできることを確認します。IM が送受信でき、ユーザのアベイラビリティの変化が確認できることを確認します。複数のクラスタを設定する場合は、クラスタ全体の基本的な IM とアベイラビリティを検証します。 |
||
8 |
高可用性とプレゼンス冗長グループの設定 |
高可用性とプレゼンス冗長性グループを設定する手順については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。 |
||
9 |
サービスが実行されていること、およびクライアントがログインできることの検証 |
サービスが実行中であることを確認する検証タスクを実行します。クライアントが IM and Presence Service にログインできること、そしてアベイラビリティがあることを確認します。 |
||
10 |
セキュア通信の有効化 |
|
||
11 |
証明書を使用してクライアントを検証します。 |
クライアントが IM and Presence Service にログインできること、そしてアベイラビリティがあることを確認します。 |