アクセスポイントの電源としての USB ポート
一部の Cisco AP には、一部の USB デバイスの電源として機能する USB ポートがあります。最大電力は 2.5 W です。USB デバイスが 2.5 W を超える電力を取り出すと、USB ポートは自動的にシャットダウンにします。消費電力が 2.5 W 以下の場合、ポートは有効になっています。AP のデータシートを参照して、AP に電源として機能できる USB ポートがあるかどうかを確認してください。
(注) |
コントローラは、最後の 5 つの電力の超過引き出しインシデントをそのログに記録します。 |
注意 |
サポートされていない USB デバイスが Cisco AP に接続されている場合、次のメッセージが表示されます。 挿入された USB モジュールはサポート対象デバイスではありません。この USB デバイスの動作およびアクセス ポイントへの影響は保証されていません。シスコは、障害または欠陥が、顧客または再販業者が取り付けたサードパーティ製 USB モジュールを使用したことによるものと判断される場合、保証に基づくサポートまたは契約に基づくサポート プログラムの提供を差し控える場合があります。シスコのネットワーキング製品のサポートを提供する過程で、トラブルシューティングの目的で根本原因を診断する上でサードパーティ製の部品を取り外すことがシスコに役立つと判断した場合に、エンド ユーザーはシスコがサポートする USB モジュールを取り付けるように求められることがあります。また、シスコは、当該サービスを提供した後に、製品の欠陥の根本原因はサポート対象外のデバイスによるものだったとシスコが判断したときに、シスコは、お客様に提供されるサービスのその時点で最新の実費請求レートをお客様に請求する権利を留保します。 |