Sample Output from the show ipv6 rip Command
In the following example, output information about all current IPv6 RIP processes is displayed using the show ipv6 ripcommand:
Router> show ipv6 rip
RIP process "process1", port 521, multicast-group FF02::9, pid 62
Administrative distance is 120. Maximum paths is 1
Updates every 5 seconds, expire after 15
Holddown lasts 10 seconds, garbage collect after 30
Split horizon is on; poison reverse is off
Default routes are generated
Periodic updates 223, trigger updates 1
Interfaces:
Ethernet0/0
Redistribution:
Redistributing protocol bgp 65001 route-map bgp-to-rip
In the following example, output information about a specified IPv6 RIP process database is displayed using the show ipv6 ripcommand with the name argument and the database keyword. In the following output for the IPv6 RIP process named process1, timer information is displayed, and route 2001:DB8::16/64 has a route tag set:
Router> show ipv6 rip process1 database
RIP process "process1", local RIB
2001:DB8::/64, metric 2
Ethernet0/0/FE80::A8BB:CCFF:FE00:B00, expires in 13 secs
2001:DB8::/16, metric 2 tag 4, installed
Ethernet0/0/FE80::A8BB:CCFF:FE00:B00, expires in 13 secs
2001:DB8:1::/16, metric 2 tag 4, installed
Ethernet0/0/FE80::A8BB:CCFF:FE00:B00, expires in 13 secs
2001:DB8:2::/16, metric 2 tag 4, installed
Ethernet0/0/FE80::A8BB:CCFF:FE00:B00, expires in 13 secs
::/0, metric 2, installed
Ethernet0/0/FE80::A8BB:CCFF:FE00:B00, expires in 13 secs
In the following example, output information for a specified IPv6 RIP process is displayed using the show ipv6 ripuser EXEC command with the name argument and the next-hops keyword:
Router> show ipv6 rip process1 next-hops
RIP process "process1", Next Hops
FE80::A8BB:CCFF:FE00:A00/Ethernet0/0 [4 paths]
Sample Output from the show ipv6 route Command
The current metric of the route can be found by entering the show ipv6 route command. In the following example, output information for all IPv6 RIP routes is displayed using the show ipv6 routecommand with the rip protocol keyword:
Router> show ipv6 route rip
IPv6 Routing Table - 17 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
R 2001:DB8:1::/32 [120/2]
via FE80::A8BB:CCFF:FE00:A00, Ethernet0/0
R 2001:DB8:2::/32 [120/2]
via FE80::A8BB:CCFF:FE00:A00, Ethernet0/0
R 2001:DB8:3::/32 [120/2]
via FE80::A8BB:CCFF:FE00:A00, Ethernet0/0
Sample Output from the debug ipv6 rip Command
In the following example, debugging messages for IPv6 RIP routing transactions are displayed using the debug ipv6 ripcommand:
Note |
By default, the system sends the output from debug commands and system error messages to the console. To redirect debugging output, use the logging command options within privileged EXEC mode. Possible destinations include the console, virtual terminals, internal buffer, and UNIX hosts running a syslog server.
|
Router# debug ipv6 rip
RIPng: Sending multicast update on Ethernet0/0 for process1
src=FE80::A8BB:CCFF:FE00:B00
dst=FF02::9 (Ethernet0/0)
sport=521, dport=521, length=112
command=2, version=1, mbz=0, #rte=5
tag=0, metric=1, prefix=2001:DB8::/64
tag=4, metric=1, prefix=2001:DB8:1::/16
tag=4, metric=1, prefix=2001:DB8:2;:/16
tag=4, metric=1, prefix=2001:DB8:3::/16
tag=0, metric=1, prefix=::/0
RIPng: Next RIB walk in 10032
RIPng: response received from FE80::A8BB:CCFF:FE00:A00 on Ethernet0/0 for process1
src=FE80::A8BB:CCFF:FE00:A00 (Ethernet0/0)
dst=FF02::9
sport=521, dport=521, length=92
command=2, version=1, mbz=0, #rte=4
tag=0, metric=1, prefix=2001:DB8::/64
tag=0, metric=1, prefix=2001:DB8:1::/32
tag=0, metric=1, prefix=2001:DB8:2::/32
tag=0, metric=1, prefix=2001:DB8:3::/32