Role-Based CLI Access

The Role-Based CLI Access feature allows the network administrator to define views, which are a set of operational commands and configuration capabilities that provide selective or partial access to Cisco IOS EXEC and configuration (config) mode commands. Views restrict user access to Cisco IOS command-line interface (CLI) and configuration information; that is, a view can define what commands are accepted and what configuration information is visible. Thus, network administrators can exercise better control over access to Cisco networking devices.

Prerequisites for Role-Based CLI Access

Your image must support CLI views.

Restrictions for Role-Based CLI Access

Lawful Intercept Images Limitation

CLI views are a part of all platforms and Cisco IOS images because they are a part of the Cisco IOS parser. However, the lawful intercept view is available only in images that contain the lawful intercept subsystem.

Maximum Number of Allowed Views

The maximum number of CLI views and superviews, including one lawful intercept view, that can be configured is 15. (This does not include the root view.)

Parse View Profiles

When you configure Parse View profiles, the 'no' or 'default' commands in combination with any configuration commands are not saved to the startup-configuration file. The configuration is accepted and is persistent until the device is reloaded. Examples of commands which are not saved to the startup-configuration:

  • command configure include all no

  • command interface include all no

  • command configure include all default

Information About Role-Based CLI Access

Benefits of Using CLI Views

Although users can control CLI access via both privilege levels and enable mode passwords, these functions do not provide network administrators with the necessary level of detail needed when working with Cisco IOS devices. CLI views provide a more detailed access control capability for network administrators, thereby, improving the overall security and accountability of Cisco IOS software.

As of Cisco IOS Release 12.3(11)T, network administrators can also specify an interface or a group of interfaces to a view; thereby, allowing access on the basis of specified interfaces.

Root View

When a system is in root view, it has all of the access privileges as a user who has level 15 privileges. If the administrator wishes to configure any view to the system (such as a CLI view, a superview, or a lawful intercept view), the system must be in root view.

The difference between a user who has level 15 privileges and a root view user is that a root view user can configure a new view and add or remove commands from the view. Also, when you are in a CLI view, you have access only to the commands that have been added to that view by the root view user.

Lawful Intercept View

Like a CLI view, a lawful intercept view restricts access to specified commands and configuration information. Specifically, a lawful intercept view allows a user to secure access to lawful intercept commands that are held within the TAP-MIB, which is a special set of simple network management protocol (SNMP) commands that store information about calls and users.

Commands available in lawful intercept view belong to one of the these categories:

  • Lawful intercept commands that should not be made available to any other view or privilege level

  • CLI views that are useful for lawful intercept users but do not have to be excluded from other views or privilege levels

Superview

A superview consists of one or more CLI views, which allow users to define what commands are accepted and what configuration information is visible. Superviews allow a network administrator to easily assign all users within configured CLI views to a superview instead of having to assign multiple CLI views to a group of users.

Superviews contain these characteristics:

  • A CLI view can be shared among multiple superviews.

  • Commands cannot be configured for a superview; that is, you must add commands to the CLI view and add that CLI view to the superview.

  • Users who are logged into a superview can access all of the commands that are configured for any of the CLI views that are part of the superview.

  • Each superview has a password that is used to switch between superviews or from a CLI view to a superview.

  • If a superview is deleted, its associated CLI views are not deleted.

View Authentication via a New AAA Attribute

View authentication is performed by an external authentication, authorization, and accounting (AAA) server via the new attribute cli-view-name .

AAA authentication associates only one view name to a particular user; that is, only one view name can be configured for a user in an authentication server.

How to Use Role-Based CLI Access

Configuring a CLI View

Perform this task to create a CLI view and add commands or interfaces to the view, as appropriate.

Before you begin

Before you create a view, you must perform the following tasks:

  • Enable AAA using the aaa new-model command.

  • Ensure that your system is in root view-not privilege level 15.

SUMMARY STEPS

  1. enable view
  2. configure terminal
  3. parser view view-name [inclusive]
  4. secret [0 | 5] encrypted-password
  5. commands parser-mode {exclude | include-exclusive | include} [all] [interface interface-name | command]
  6. end
  7. enable [privilege-level | view view-name ]
  8. show parser view all

DETAILED STEPS

  Command or Action Purpose

Step 1

enable view

Example:


Device> enable view 

Enables root view.

  • Enter your privilege level 15 password (for example, root password) if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

parser view view-name [inclusive]

Example:


Device(config)# parser view first inclusive
Device(config-view)# 

Creates a view including all commands by default. If the inclusive keyword option is not selected, it creates a view excluding all commands by default. You are in the view configuration mode.

Step 4

secret [0 | 5] encrypted-password

Example:


Device(config-view)# secret 5 secret

Associates a CLI view or superview with a password.

Note

 

You must issue this command before you can configure additional attributes for the view.

Note

 
With CSCts50236, the password can be removed or overwritten. Use the no secret command to remove the configured password.

Step 5

commands parser-mode {exclude | include-exclusive | include} [all] [interface interface-name | command]

Example:


Device(config-view)# commands exec include show version

Adds commands or interfaces to a view and specifies the mode in which the specified command exists.

Note

 
While configuring parser view profiles, the following no or default commands are not saved to the startup configuration. These commands are in use until the device is reloaded. Once the device is reloaded, reapply these commands to get the required results.
  • commands configure include all no

  • commands interface include all no

  • commands configure include all default

Step 6

end

Example:


Device(config-view)# end

Exits view configuration mode and returns to privileged EXEC mode.

Step 7

enable [privilege-level | view view-name ]

Example:


Device# enable view first

Prompts you for a password to access a configured CLI view, and you can switch from one view to another view.

Enter the password to access the CLI view.

Step 8

show parser view all

Example:


Device# show parser view all

(Optional) Displays information for all views that are configured on the device.

Note

 

Although this command is available for both root and lawful intercept users, the all keyword is available only to root users. However, the all keyword can be configured by a user in root view to be available for users in lawful intercept view and CLI view.

Troubleshooting Tips

You must associate a password with a view. If you do not associate a password, and you attempt to add commands to the view using the commands command, a system message such as the following is displayed:


%Password not set for view <viewname>.

Configuring a Lawful Intercept View

Perform this task to initialize and configure a view for lawful-intercept-specific commands and configuration information.

Before you begin

Before you initialize a lawful intercept view, ensure that the privilege level is set to 15 using the privilege command.


Note


Only an administrator or a user who has level 15 privileges can initialize a lawful intercept view.


SUMMARY STEPS

  1. enable view
  2. configure terminal
  3. li-view li-password user username password password
  4. username lawful-intercept [name ] [privilege privilege-level | view view-name ] password password
  5. parser view view-name
  6. secret 5 encrypted-password
  7. name new-name

DETAILED STEPS

  Command or Action Purpose

Step 1

enable view

Example:


Device> enable view 

Enables root view.

  • Enter your privilege level 15 password (for example, root password) if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

li-view li-password user username password password

Example:


Device(config)# li-view lipass user li_admin password li_adminpass

Initializes a lawful intercept view.

After the li-view is initialized, you must specify at least one user via user username password password options.

Step 4

username lawful-intercept [name ] [privilege privilege-level | view view-name ] password password

Example:


Device(config)# username lawful-intercept li-user1 password li-user1pass

Configures lawful intercept users on a Cisco device.

Step 5

parser view view-name

Example:


Device(config)# parser view li view name

(Optional) Enters view configuration mode, which allows you to change the lawful intercept view password or the lawful intercept view name.

Step 6

secret 5 encrypted-password

Example:


Device(config-view)# secret 5 secret

(Optional) Changes an existing password for a lawful intercept view.

Step 7

name new-name

Example:


Device(config-view)# name second

(Optional) Changes the name of a lawful intercept view.

If this command is not issued, the default name of the lawful intercept view is “li-view.”

Troubleshooting Tips

To display information for all users who have access to a lawful intercept view, issue the show users lawful-intercept command. (This command is available only to authorized lawful intercept view users.)

Configuring a Superview

Perform this task to create a superview and add at least one CLI view to the superview.

Before you begin

Before adding a CLI view to a superview, ensure that the CLI views that are added to the superview are valid views in the system; that is, the views have been successfully created using the parser view command.


Note


You can add a view to a superview only after you configure a password for the superview (using the secret 5 command). Thereafter, issue the view command in view configuration mode to add at least one CLI view to the superview.


SUMMARY STEPS

  1. enable view
  2. configure terminal
  3. parser view superview-name superview
  4. secret 5 encrypted-password
  5. view view-name
  6. end
  7. show parser view all

DETAILED STEPS

  Command or Action Purpose

Step 1

enable view

Example:


Device> enable view 

Enables root view.

  • Enter your privilege level 15 password (for example, root password) if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

parser view superview-name superview

Example:


Device(config)# parser view su_view1 superview

Creates a superview and enters view configuration mode.

Step 4

secret 5 encrypted-password

Example:


Device(config-view)# secret 5 secret

Associates a CLI view or superview with a password.

Note

 

You must issue this command before you can configure additional attributes for the view.

Step 5

view view-name

Example:


Device(config-view)# view view_three

Adds a normal CLI view to a superview.

Issue this command for each CLI view that is to be added to a given superview.

Step 6

end

Example:


Device(config-view)# end
Device#

Exits view configuration mode and returns to privileged EXEC mode.

Step 7

show parser view all

Example:


Device# show parser view

(Optional) Displays information for all views that are configured on the device.

Note

 

Although this command is available for both root and lawful intercept users, the all keyword is available only to root users. However, the all keyword can be configured by a user in root view to be available for users in lawful intercept view and CLI view.

Monitoring Views and View Users

To display debug messages for all views-root, CLI, lawful intercept, and superview-use the debug parser view command in privileged EXEC mode.

Configuration Examples for Role-Based CLI Access

Example: Configuring a CLI View

The following example shows how to configure two CLI views, “first” and “second". Thereafter, you can verify the CLI view in the running configuration.


Device(config)# parser view first inclusive
Device(config-view)# secret 5 firstpass
Device(config-view)# command exec exclude show version
Device(config-view)# command exec exclude configure terminal
Device(config-view)# command exec exclude all show ip
Device(config-view)# exit
Device(config)# parser view second
Device(config-view)# secret 5 secondpass
Device(config-view)# command exec include-exclusive show ip interface
Device(config-view)# command exec include logout
Device(config-view)# exit
!
!
Device(config-view)# do show running-config | beg view

parser view first inclusive
 secret 5 $1$MCmh$QuZaU8PIMPlff9sFCZvgW/
 commands exec exclude configure terminal
 commands exec exclude configure
 commands exec exclude all show ip
 commands exec exclude show version
 commands exec exclude show
!
parser view second 
 secret 5 $1$iP2M$R16BXKecMEiQesxLyqygW.
 commands exec include-exclusive show ip interface
 commands exec include show ip
 commands exec include show
 commands exec include logout
!

Example: Verifying a CLI View

After you have configured the CLI views “first” and “second", you can issue the enable view command to verify which commands are available in each view. The following example shows which commands are available inside the CLI view “first” after the user has logged into this view. (Because the show ip command is configured with the all option, a complete set of suboptions is shown, except the show ip interface command, which is using the include-exclusive keyword in the second view.)


Device# enable view first
Password:
Device# ?
Exec commands:
  configure  Enter configuration mode
  enable     Turn on privileged commands
  exit       Exit from the EXEC
  show       Show running system information
Device# show ?
  ip       IP information
  parser   Display parser information
  version  System hardware and software status
Device# show ip ?
 
  access-lists            List IP access lists
  accounting              The active IP accounting database
  aliases                 IP alias table
  arp                     IP ARP table
  as-path-access-list     List AS path access lists
  bgp                     BGP information
  cache                   IP fast-switching route cache
  casa                    display casa information
  cef                     Cisco Express Forwarding
  community-list          List community-list
  dfp                     DFP information
  dhcp                    Show items in the DHCP database
  drp                     Director response protocol
  dvmrp                   DVMRP information
  eigrp                   IP-EIGRP show commands
  extcommunity-list       List extended-community list
  flow                    NetFlow switching
  helper-address          helper-address table
  http                    HTTP information
  igmp                    IGMP information
  irdp                    ICMP Device Discovery Protocol
.
.
.

Example: Configuring a Lawful Intercept View

The following example shows how to configure a lawful intercept view, add users to the view, and verify the users that were added:


!Initialize the LI-View.
Device(config)# li-view lipass user li_admin password li_adminpass
Device(config)# end
! Enter the LI-View; that is, check to see what commands are available within the view.
Device# enable view li-view
Password:
Device# configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Device(config)# parser view li-view
 
Device(config-view)# ?
View commands:
  commands  Configure commands for a view
  default   Set a command to its defaults
  exit      Exit from view configuration mode
  name      New LI-View name      
  no        Negate a command or set its defaults
  password  Set a password associated with CLI views
Device(config-view)#
! NOTE:LI View configurations are never shown as part of ‘running-configuration’.
! Configure LI Users.
Device(config)# username lawful-intercept li-user1 password li-user1pass
 
Device(config)# username lawful-intercept li-user2 password li-user2pass
! Displaying LI User information.
Device# show users lawful-intercept
li_admin     
li-user1     
li-user2     
Device#

Note


The lawful intercept view is available only on specific images and the view name option is available only in the LI view.

Example: Configuring a Superview

The following sample output from the show running-config command shows that “view_one” and “view_two” have been added to superview “su_view1", “view_three”, and “view_four” have been added to superview “su_view2”:


Device# show running-config
!
parser view su_view1 superview
 secret 5 <encoded password>
 view view_one
 view view_two
!
parser view su_view2 superview
 secret 5 <encoded password>
 view view_three
 view view_four
!

Additional References for Role-Based CLI Access

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Command List, All Releases

Security commands

SNMP, MIBs, CLI configuration

Cisco IOS Network Management Configuration Guide , Release 15.0.

Privilege levels

"Configuring Security with Passwords, Privileges and Logins" module.

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for Role-Based CLI Access

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for Role-Based CLI Access

Feature Name

Releases

Feature Information

Role-Based CLI Access

The Role-Based CLI Access feature enables network administrators to restrict user access to CLI and configuration information.

The CLI view capability was extended to restrict user access on a per-interface level, and additional CLI views were introduced to support the extended view capability. Also, support to group configured CLI views into a superview was introduced.

The following commands were introduced or modified: commands (view) , enable , li-view , name (view) , parser view , parser view superview, secret , show parser view , show users , username , and view .

Role-Based CLI Inclusive Views

The Role-Based CLI Inclusive Views feature enables a standard CLI view including all commands by default.

The following command was modified: parser view inclusive .