Chassis Product IDs
The following table lists the high-level product IDs.
|
Component |
Product ID |
Description |
|---|---|---|
|
Multishelf System Components |
||
|
CRS multishelf system |
CRS-MC-FC24 |
Cisco CRS Multishelf System |
The following table lists the PIDs for the fabric card chassis and its components.
|
Component |
Product ID |
Description |
|---|---|---|
|
Fabric card chassis (complete) |
CRS-FC24(=) |
Cisco CRS FCC for a multishelf system (without switch fabric cards) |
|
Fabric card chassis (chassis only) |
CRS-FCC(=) |
Cisco CRS-1 routing system FCC (spare chassis) |
|
Fan tray with fans |
CRS-FCC-FAN-TR(=) |
Cisco CRS FCC fan tray with fans (spare)(2 required for each chassis) |
|
Cards and modules |
||
|
Switch fabric card (fabric chassis) |
CRS-FCC-SFC(=) CRS-FCC-SFC-140(=) |
S2 switch fabric cards for 40G system (8 required for each fabric chassis) S2 switch fabric cards for 140G system (8 required for each fabric chassis) |
|
Switch fabric card blank |
CRS-SFC-IMPEDANCE(=) |
Blank card carrier for each switch fabric slot (used for shipment; must be replaced with fabric card) |
|
22-port shelf controller card |
CRS-FCC-SC-22GE(=) |
22-port shelf controller Gigabit Ethernet (22-port SCGE) card(2 recommended for each fabric chassis) |
|
OIM, single-width |
CRS-FCC-OIM-1S(=) |
Optical interconnect module (OIM)(1 required for each S2 fabric card in fabric chassis) |
|
OIM blank |
CRS-OIM-IMPEDANCE(=) |
Blank carrier for each empty OIM slot |
|
SFC and OIM eight pack bundle |
CRS-FC24-SFC-8P(=) |
Eight pack of S2 switch fabric cards and optional interconnect modules |
|
FM-LED |
CRS-FCC-LED(=) |
Fiber module LED card (2 required for each fabric chassis) |
|
FM-LED blank |
CRS-FM-IMPEDANCE(=) |
Blank carrier for each empty FM-LED slot (required for EMI compliance and cooling) |
|
Fixed Configuration Power |
||
|
AC Delta power system |
CRS-FCC-ACD-KIT(=) |
AC Delta power system for fabric chassis (includes 2 power shelves and 6 AC rectifiers) |
|
AC Wye power system |
CRS-FCC-ACW-KIT(=) |
AC Wye power system for fabric chassis (includes 2 power shelves and 6 AC rectifiers) |
|
DC power system |
CRS-FCC-DC-KIT(=) |
DC power system for fabric chassis(includes 2 power shelves and 4 power modules) |
|
AC power rectifier |
CRS-16-AC-RECT(=) |
AC power rectifier for line card chassis (6 required for each chassis; 3 required for each AC power shelf) |
|
DC PEM |
CRS-16-DC-PEM(=) |
AC power entry module for line card chassis (6 required for each chassis; 3 required for each DC power shelf) |
|
Alarm module |
CRS-16-ALARM(=) |
Chassis alarm module (1 required for each power shelf) |
|
Modular Configuration Power |
||
|
AC power system |
CRS-FCC-ACKIT-M(=) |
AC power system for fabric chassis(includes 2 power shelves and 6 AC PMs) |
|
DC power system |
CRS-FCC-DCKIT-M(=) |
DC power system for fabric chassis(includes 2 power shelves and 8 DC PMs) |
|
Alarm module |
CRS-16-ALARM-C(=) |
Chassis alarm module(1 required for each power shelf) |
|
AC power cord |
CRS-AC-CAB-NA CRS-AC-CAB-AU CRS-AC-CAB-UK CRS-AC-CAB-EU CRS-AC-CAB-IT |
AC power cord—North America AC power cord—Australia AC power cord—United Kingdom AC power cord—Europe AC power cord—Italy Length of each power cord is 4.25 m. |
|
Cable management and cosmetics |
||
|
Front cosmetics |
CRS-FCC-FRNT-CM(=) |
Front cosmetics and cable management kit (front door not included) |
|
Rear cosmetics |
CRS-FCC-REAR-CM(=) |
Rear cosmetics and cable management kit(rear door not included) |
|
Front door |
CRS-FCC-DRS-FR(=) |
Front door for fabric chassis |
|
Rear door |
CRS-FCC-DRS-RR(=) |
Rear door for fabric chassis |
|
AC power grille |
CRS-FCC-ACGRILLE(=) |
Front grille for fixed configuration AC power shelves |
|
DC power grille |
CRS-FCC-DCGRILLE(=) |
Front grille for fixed configuration DC power shelves |
|
Modular power grille |
CRS-16-PW-GRILL(=) |
Front grille for modular configuration AC and DC power shelves |
|
Chassis installation accessories (included with chassis) |
||
|
Drill hole template |
CRS-LCC-DRILLTEMP(=) |
Aluminum template showing where to drill the mounting holes to secure the chassis to the floor |
|
Chassis access template |
CRS-LCC-FLOORTEMP (=) |
Mylar template showing chassis door swings and maintenance access area |
|
Inrigger kit |
CRS-FCC-ALTMNT(=) |
Alternate mounting kit for anchoring chassis to floor |
The following table lists the PIDs for the Cisco CRS 16-slot line card chassis and its components.
|
Component |
Product ID |
Description |
|---|---|---|
|
Line card chassis(complete) |
CRS-16-LCC/M CRS-16LCC140/M CRS-16/S |
Cisco CRS-1 40G LCC (with 2 route processors [RPs], S13 fabric cards, and optical array cables) Cisco CRS-3 140G LCC (with 2 route processors [RPs], S13 fabric cards, and optical array cables) Cisco CRS LCC (with 2 route processors [RPs] and S123 fabric cards) |
|
Conversion Kit |
CRS-16-MC-CONVCRS-16-MC140-CONV |
Cisco CRS Multichassis conversion kit that converts a standalone Cisco CRS 16-Slot LCC into a Cisco CRS-1 Multichassis LCCCisco CRS Multichassis conversion kit that converts a standalone Cisco CRS 16-Slot LCC into a Cisco CRS-3 Multichassis LCC |
|
Switch fabric cards |
||
|
Switch fabric card (single-shelf system) |
CRS-16-FC/S(=) CRS-16-FC140/S(=) CRS-16-FC400/S(=) |
S123 switch fabric cards for CRS-1 system S123 switch fabric cards for CRS-3 system S123 switch fabric cards for CRS-X system (8 required for each line card chassis) |
|
Switch fabric card (multi-shelf system) |
CRS-16-FC/M(=) CRS-16-FC140/M(=) CRS-16-FC400/M(=) |
S13 switch fabric cards for CRS-1 system S13 switch fabric cards for CRS-3 system S13 switch fabric cards for CRS-X system (8 required for each line card chassis) |
|
Route processors |
||
|
Route processor |
CRS-16-RP(=) |
Route processor (2 required for each line card chassis) |
|
Performance route processor (PRP) |
CRS-16-PRP-6G= CRS-16-PRP-12G= |
Performance route processor (6GB memory) Performance route processor (12GB memory) (2 PRPs required for each line card chassis) |
|
Distributed route processor (DRP) |
CRS-DRP(=) |
Additional route processor for the system (optional) (includes two cards, DRP CPU and DRP PLIM) |
|
To order DRP cards separately, use the following IDs (both cards are required for DRP operation): |
||
|
CRS-DRP-B-CPU(=) |
DRP card only (requires DRP PLIM) |
|
|
CRS-DRP-B-PLIM(=) |
DRP PLIM only (requires DRP CPU) |
|
|
Fixed Configuration Power |
||
|
AC Delta power shelf |
CRS-16-LCC-PS-ACD(=) |
AC Delta power shelf for line card chassis (2 required for each chassis) |
|
AC Wye power shelf |
CRS-16-LCC-PS-ACW(=) |
AC Wye power shelf for line card chassis (2 required for each chassis) |
|
DC power shelf |
CRS-16-LCC-PS(=) |
DC power shelf for line card chassis (2 required for each chassis) |
|
AC power rectifier |
CRS-16-AC-RECT(=) |
AC power rectifier for line card chassis(6 required for each chassis; 3 required for each AC power shelf) |
|
DC PEM |
CRS-16-DC-PEM(=) |
AC power entry module for line card chassis(6 required for each chassis; 3 required for each DC power shelf) |
|
Alarm module |
CRS-16-ALARM(=) |
Chassis alarm module(2 required for each chassis; 1 required for each power shelf) |
|
Modular Configuration Power |
||
|
AC power system |
CRS-16-ACKIT-M(=) |
AC power system for fabric chassis(includes 2 power shelves and 10 AC PMs) |
|
DC power system |
CRS-16-DCKIT-M(=) |
DC power system for fabric chassis(includes 2 power shelves and 12 DC PMs) |
|
AC power module |
CRS-PM-AC |
Modular AC power module (Up to 6 required for each power shelf) |
|
DC power module |
CRS-PM-DC |
Modular DC power module (Up to 8 required for each power shelf) |
|
Alarm module |
CRS-16-ALARM-C(=) |
Modular power alarm module(1 required for each power shelf) |
|
AC power cord |
CRS-AC-CAB-NA CRS-AC-CAB-AU CRS-AC-CAB-UK CRS-AC-CAB-EU CRS-AC-CAB-IT |
AC power cord—North America AC power cord—Australia AC power cord—United Kingdom AC power cord—Europe AC power cord—Italy Length of each power cord is 4.25 m. |
|
Cable management and cosmetics |
||
|
Front cosmetics |
CRS-16-LCC-FRNT(=) |
Front cosmetics and cable management kit |
|
Rear cosmetics |
CRS-16-LCC-BCK-CM(=) |
Rear cosmetics and cable management kit |
|
Front door |
CRS-16-LCC-DRS-FR(=) |
Front doors |
|
Rear door |
CRS-16-LCC-DRS-RR(=) |
Rear doors |
|
AC power grille |
CRS-16-ACGRILLE(=) |
Front grille for fixed configuration AC power shelves |
|
DC power grille |
CRS-16-DCGRILLE(=) |
Front grille for fixed configuration DC power shelves |
|
Modular power grille |
CRS-16-PW-GRILL(=) |
Front grille for modular configuration AC and DC power shelves |
|
Chassis installation accessories (included with chassis) |
||
|
Drill hole template |
CRS-LCC-DRILLTEMP(=) |
Aluminum template showing where to drill the mounting holes to secure the chassis to the floor |
|
Chassis access template |
CRS-LCC-FLOORTEMP (=) |
Mylar template showing chassis door swings and maintenance access area |
|
Chassis floor mounting kit |
CRS-16-LCC-ALTMNT(=) |
Alternate mounting kit for anchoring chassis to floor |
|
For detailed specifications for Cisco CRS-1 routing system PLIMs, RPs and other components refer to the data sheet on: http://www.cisco.com/en/US/partner/products/ps5763/products_data_sheets_list.html . CCO login is required. For additional information on Cisco CRS-1 routing system SPA interface processor (SIP) and shared port adapters (SPAs), see Cisco CRS SIP and SPA Hardware Installation Guide . |
||
Feedback