Status and Configuration
View Cluster Node Information
To view information on the nodes in the cluster, follow this procedure:
View Hardware Status
To view the hardware status, follow this procedure:
|
Display Network Status
The network status information that appears depends on if Network Fault Tolerance is enabled. When Network Fault Tolerance is enabled, Ethernet port 1 automatically takes over network communications if Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status information appears for the network ports Ethernet 0, Ethernet 1, and Bond 0. If Network Fault Tolerance is not enabled, status information appears only for Ethernet 0.
To view the network status, follow this procedure:
|
Verify Installed Software
To view the software versions and installed software options, follow this procedure:
|
View System Status
|
Display Registered Ports
You can use the IP Preferences window to display a list of registered ports that the system can use. The IP Preferences window contains the following information:
Step 1 | From the Cisco Unified Communications Operating System Administration window, choose The . IP Preferences window appears. Records from an active (prior) query may also appear in the window. | ||||||||||||||||
Step 2 | To find all records in the database, ensure the dialog box is empty and go to Step 4. | ||||||||||||||||
Step 3 | To filter or search records, do the following:
| ||||||||||||||||
Step 4 | Click
Find.
All matching records appear. You can change the number of items that appear on each page by choosing a different value from the Rows per Page drop-down list box.
|