6. Configure
the phones individually in Unified CM with the correct directory numbers or
configure them with the Unified CM BAT tool. For Bulk Configuration, associate
the Device Pool with the Phone Configuration.
|
Specifies a
unique dialable phone number for each phone.
Also,
defines characteristics for devices, such as region, date/time group, failover
behavior, and others.
You must set
the configuration on each IP phone so that it can locate and connect to Unified
CM. This procedure varies by site according to the customer's network
configuration.
Phone
Configuration window or BAT
See also the
Cisco Unified
Communications Manager Administration Guide,
"Cisco
Unified IP Phone Configuration" section.
From the
Unified CM Administration page menu bar, select
and then click the Add New link.
Next select your phone type and click
Next and continue to follow the instructions,
filling in the required information in the Phone Configuration window.
Add the
phone number and a directory number to the phone number, and then configure the
DN (Dialed Number).
|