エンタープライズ パラメータ
|
接続モニタ間隔(Connection Monitor Duration)
|
クラスタ内の IP 電話がセカンダリ ノードに登録された場合に、このパラメータを使用して、プライマリ ノードが使用可能になった後、それがフォールバックして再登録される前に、IP 電話が待機する時間を設定します。このパラメータは、特定のセキュア
Survivable Remote Site Telephony(SRST)ルータに対応するすべてのセキュアなデバイスに影響します。
詳細については、『Cisco Unified Communications Manager セキュリティ ガイド』(http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-maintenance-guides-list.html)を参照してください。
デフォルトは 120 秒です。
変更内容を反映するには、すべてのサービスを再起動してください。
|
CCMAdmin パラメータ
|
[依存性レコードを有効化(Enable Dependency Records)]
|
このパラメータはトラブルシューティングに必要な依存関係の記録を表示します。初期システム設定の間、依存記録を表示することは有益であるかもしれない。
依存関係記録の表示は、高いCPU使用率のピークをもたらし、コール処理に影響を与える可能性がある。考えられるパフォーマンス問題を回避するために、システム設定の完了後は、このパラメータを無効にします。負荷の低い時間帯またはメンテナンス ウィンドウの間のみに依存関係レコードを表示することを推奨します。
有効にするには、Cisco Unified Communications Manager Administration を使用して大半の設定ウィンドウからアクセスできる [関連リンク(Related Links)] ドロップダウン リストから [依存関係レコード(Dependency Records)] を選択できます。
デフォルト:[いいえ(False)]
|
ユーザ データ サービス パラメータ
|
[すべてのユーザ検索を有効にする(Enable All User Search)]
|
名前、名前、またはディレクトリ番号が指定されていない場合、このパラメータは会社のディレクトリのすべてのユーザを検索することができます。このパラメータは、[Cisco CallManager セルフ ケア(Cisco CallManager Self
Care)](CCMUser)ウィンドウでのディレクトリ検索にも適用されます。
デフォルト:[はい(True)]
|
クラスタ全体のドメイン設定
|
[組織の最上位ドメイン(Organization Top Level Domain)]
|
このパラメータは、組織のトップレベルのドメインを定義します。例:cisco.com
最大長:255 文字
許可された値は、大文字と小文字、数字(0-9)、ハイフンとポイント(ドメインラベル区切り記号として)の有効領域を使用します。ドメイン ラベルの先頭文字をハイフンにすることはできません。最後のラベルの先頭文字を数字にすることはできません。たとえば、cisco.1om
といったドメインは無効です。
|
[クラスタの完全修飾ドメイン名(Cluster Fully Qualified Domain Name)]
|
このパラメータに、このクラスタの 1 つまたは複数の完全修飾ドメイン名(FQDN)を定義します。複数の FQDN はスペースで区切る必要があります。アスタリスク(*)を使用して、FQDN 内でワイルドカードを指定することができます。例:cluster-1.cisco.com *.cisco.com
このパラメータのいずれかの FQDN に一致するホスト部分がある URL を含む要求(SIP コールなど)は、クラスタと接続されたデバイスにルーティングされます。
最大長:255 文字
有効な値:FQDN または * ワイルドカードを使用した部分的な FQDN。大文字と小文字、数字(0-9)、ハイフンとポイント(ドメインラベル区切り記号として)。ドメイン ラベルの先頭文字をハイフンにすることはできません。最後のラベルの先頭文字を数字にすることはできません。たとえば、cisco.1om
といったドメインは無効です。
|
IPv6
|
[IPv6を有効化(Enable IPv6)]
|
このパラメータは、Unified Communications Manager が Internet Protocol Version 6(IPv6)をネゴシエートできるかどうか、および電話で IPv6 機能をアドバタイズできるかどうかを決定します。
このパラメータを有効化する前に、すべてのノードのプラットフォームも含め、他のすべてのネットワーク コンポーネントで IPv 6を有効にする必要があります。それ以外の場合、システムは引き続き IPv4 専用モードで稼動します。
必須フィールドです。
デフォルト:False(IPv6 は無効です)
IPv 6パラメータの変更を有効にするには、以下のサービスを再起動する必要があります。また、インスタントメッセージとオンラインサービスグループで影響を受けるサービスを再起動してください。
|
Cisco Syslog Agent
|
リモート Syslog サーバ名 1(Remote Syslog Server Name 1)
|
リモート Syslog サーバの名前または IP アドレスを入力します。サーバ名が指定されていない場合、Cisco Unified Serviceability は Syslog メッセージを送信しません。このパラメータは、ログ用に Syslog
サーバを使用している場合にのみ必須です。
最大長:255 文字
許可された値:文字の大きさ、数字(0-9)、ハイフン、ポイントの有効なリモートSylogサーバ名を使用します。
接続先として別の Cisco Unified Communications Manager ノードを指定しないでください。
|
Cisco Jabber
|
[ビデオとともにコールを開始しない(Never Start Call with Video)]
|
このパラメータは、ビデオ コールの開始時に、ビデオを送信するかどうかを決定します。すぐにビデオを送信せずにビデオ コールを開始するには、[True] を選択します。ビデオ コール中はいつでも、ビデオの送信開始を選択できます。
このパラメータは、IM and Presence Service のどの設定よりも優先されます。False に設定すると、IM and Presence Service で指定された設定に従ってビデオ コールが開始します。
デフォルト:False
|
SSO および OAuth の設定
|
[IOS の SSO ログイン動作(SSO Login Behavior for iOS)]
|
このパラメータは、制御された Mobile Device Manager(MDM)導入環境で Cisco Jabber が IdP に対して証明書ベースの認証を実行できるようにする場合に必要です。
[iOS向けSSOログイン動作(SSO Login Behavior for iOS)] パラメータには次のオプションが含まれます。
-
[組み込みブラウザの使用(Use Embedded Browser)]:このオプションを有効化すると、Cisco Jabber は SSO 認証に組み込みブラウザを使用します。このオプションにより、バージョン 9 より前の iOS デバイスのネイティブ Apple Safari ブラウザで、クロス起動なしの SSO
を使用できるようになります。
-
[ネイティブブラウザの使用(Use Native Browser)]:このオプションを有効化すると、Cisco Jabber は、MDM 導入環境でアイデンティティ プロバイダー(IdP)に対して証明書ベースの認証を実行するために、iOS デバイスで Apple Safari フレームワークを使用します。
(注)
|
制御された MDM 導入環境である場合を除き、ネイティブ ブラウザの使用は組み込みブラウザを使用する場合ほどセキュアではないため、このオプションの設定は推奨しません。
|
必須フィールドです。
[デフォルト(Default)]:組み込みブラウザ(WebView)を使用します。
|
[更新ログインフローを使用したOAuth(OAuth with Refresh Login Flow)]
|
このパラメータは、Unified Communications Manager に接続するときに、Cisco Jabber などのクライアントによって使用されるログイン フローを制御します。
-
[有効(Enabled)]:このオプションを有効にすると、クライアントで oAuth ベースの高速なログイン フローを使用してすばやく効率的にログインできるようになり、たとえばネットワークの変更などによってログインし直す際にユーザが入力する必要がなくなります。このオプションを使用するためには、Expressway
や Unity Connection(更新ログイン フローが有効化されている互換性のあるバージョン)など、Unified Communications ソリューションのその他のコンポーネントからのサポートが必要です。
-
[無効(Disabled)]:このオプションを有効化する場合、従来の動作のままとなり、旧バージョンの他のシステム コンポーネントとの互換性が保たれます。
(注)
|
Cisco Jabber を使用したモバイルおよびリモート アクセスの導入環境では、更新ログイン フローで oAuth をサポートする、互換性のある Expressway バージョンでのみ、このパラメータを有効化することを推奨します。互換性のないバージョンは、Cisco
Jabber の機能に影響する場合があります。サポートされているバージョンおよび設定要件については、特定の製品のドキュメントを参照してください。
|
必須フィールドです。
デフォルトでは無効になっています。
|
[RTMT での SSO の使用(Use SSO for RTMT)]
|
このパラメータは、Real-Time Monitoring Tool(RTMT)用に SAML SSO を有効化するために設定します。
[RTMTでのSSOの使用(Use SSO for RTMT)] パラメータには、次のオプションが含まれます。
必須フィールドです。
デフォルト:[True]。
|