この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
Cisco Prime Infrastructure では、Mobility Services Engine に通知を特定のリスナーに送信させる条件を定義できます。 この章では、イベントおよびイベント グループの定義方法とイベント通知の概要の表示方法について説明します。
![]() (注) |
[Services] タブの [Mobility Services Engines]、[Synchronize Services]、[Synchronization History]、[High Availability]、[Context Aware Notifications]、および [MSAP] ページは、リリース 7.3.101.0 の仮想ドメインでのみ使用できます。 |
この章の内容は、次のとおりです。
イベント グループ:イベント通知を編成しやすくなります。
イベント定義:イベント定義には、イベントを発生させた条件、イベントが適用されるアセット、イベント通知の宛先が含まれます。
イベント通知:Mobility Services Engine は、次の転送メカニズムを介して、登録されたリスナーにイベント通知を送信します。
ここでは、次の内容について説明します。
Mobility Services Engine は、イベント通知を送信しますが、イベントを保存しません。 ただし、通知イベントの宛先が Prime Infrastructure の場合、Prime Infrastructure は受信した通知を保存し、次に示す 7 つのカテゴリに分類します。
[Absence (Missing)]:Mobility Services Engine は、アセットが不明になった場合に Absence イベントを生成します。 つまり、Mobility Services Engine は、指定された時間で WLAN のアセットを検出できません。
[In/Out Area (Containment)]:Mobility Services Engine は、アセットが指定エリアに移動するかエリアから出ると Containment イベントを生成します。
![]() (注) |
Containment エリア(キャンパス、ビルディング、またはフロア)は、[Monitor] > [Maps] で定義します。 カバレッジ エリアを定義するには、Map Editor を使用します。 |
[Movement from Marker (Movement/Distance)]:Mobility Services Engine は、マップで定義した指定マーカーから指定された距離を超えてアセットが移動された場合、Movement イベントを生成します。
[Location Changes]:Mobility Services Engine は、クライアント ステーション、アセット タグ、不正クライアント、または不正アクセス ポイントのロケーションが変更されると Location Changes イベントを生成します。
[Battery Level]:Mobility Services Engine は、追跡されるすべてのアセット タグについて Battery Level イベントを生成します。
[Emergency]:Mobility Services Engine は、タグのパニック ボタンがトリガーされるか、タグが削除されるか、改ざんされるか、非アクティブになるか、不明な状態を報告すると、Cisco CX v.1 準拠のアセット タグの Emergency イベントを生成します。 この情報は、Cisco CX v.1 準拠のタグについてのみ、報告および表示されます。
[Chokepoint Notifications]:Mobility Services Engine は、タグがチョークポイントによって誘導されたときにイベントを生成します。 この情報は、Cisco CX v.1 準拠のタグについてのみ、報告および表示されます。
![]() (注) |
すべての要素のイベントは時間単位と日単位で要約されます。 |
![]() (注) |
トラック グループとイベントは、Mobility Services Engine と同期する必要があります。 |
[Missing (Absence)]:要素(クライアント、タグ、不正アクセス ポイント、または不正クライアント)が再表示される。
[In/Out Area (Containment)]:要素が Containment エリア内に戻るか、このエリアから外に出る。
[Distance]:要素がマーカーから指定された距離以内に戻る。
[Location Changes]:クリア状態はこの条件には適用されません。
[Battery Level]:タグが検出され、普通の電池残量で動作している。
![]() (注) |
Prime Infrastructure の [Notifications Summary] ページには、クリアされたイベント条件の通知を受信したかどうかが反映されます。 |
通知をテキスト形式で送信するように指定すると、Mobility Services Engine は、状態を示すためにプレーン テキストの文字列を使用します。
Tag 00:02:02:03:03:04 is in Floor <floorName> Tag 00:02:02:03:03:04 is outside Floor <floorName> Client 00:02:02:03:09:09 is in Area <areaName> RogueClient 00:02:02:08:08:08 is outside Building <buildingName> Tag 00:02:02:03:03:06 has moved 105 feet where the trigger distance was 90 feet. Tag 00:02:02:03:03:20 missing for 14 mins, last seen <timestamp>.
![]() (注) |
シスコは、テキストの通知形式を予告なしに変更する権利を保持します。 |
![]() (注) |
XML は、通知の内容を解析または分析する必要があるシステムの推奨形式です。 |
![]() (注) |
XML 形式はサポート対象 API の一部です。 シスコは、API が今後更新されるたびに、Mobility Services Engine API プログラムの一環として変更を通知します。 |
Absence 要素のメッセージ形式:
<AbsenceTrackEvent missingFor="<time in secs entity has been missing>" lastSeen="time last seen" trackDefn="<name of track definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
クリア状態のメッセージ形式:
<AbsenceTrackEvent state="clear" trackDefn="<name of track definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
次に例を示します。
<AbsenceTrackEvent state="set" missingFor="34" lastSeen="15:00:20 08 Jun 2009" trackDefn="absenceDef1" entityType="Mobile Station" entityID="00:0c:f1:53:9e:c0"/> <AbsenceTrackEvent state="clear" entityType="Tag" trackDefn="absenceDef1" entityID="00:0c:cc:5b:fc:da"/>
Containment 要素のメッセージ形式:
<ContainmentTrackEvent in="true | false" trackDefn="<name of track definition>" containerType="Floor | Area | Network Design | Building" containerID="<fully quality name of container>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
クリア状態のメッセージ形式:
<ContainmentTrackEvent state="clear" trackDefn="<name of track definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
次に例を示します。
<ContainmentTrackEvent in="true" trackDefn="myContainerRule1" containerType="Area" containerID="nycTestArea,5th Floor,Bldg-A,Rochester_Group,Rochester,"
![]() (注) |
containerID ストリングは、キャンパス Rochester の Bldg-A の 5 階にある nycTestArea というカバレッジ エリアを表します。 |
entityType="Tag" entityID="00:0c:cc:5b:fa:44"/> <ContainmentTrackEvent state="clear" entityType="Tag" trackDefn="myContainerRule1" entityID="00:0c:cc:5b:f8:ab"/>
同じフロアにある要素のメッセージ形式:
<MovementTrackEvent distance="<distance in feet at which the element was located>" triggerDistance="<the distance specified on the condition" reference="<name of the marker specified on the condition>" trackDefn="<name of event definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
別のフロアにある要素のメッセージ形式:
<MovementTrackEvent optionMsg="has moved beyond original floor" reference="<name of the marker specified on the condition>" trackDefn="<name of event definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
クリア状態のメッセージ形式:
<MovementTrackEvent state="clear" trackDefn="<name of event definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
次に例を示します。
<MovementTrackEvent distance="115.73819627990147" triggerDistance="60.0" reference="marker2" trackDefn="distance2" entityType="Mobile Station" entityID="00:0c:41:15:99:92"/>
<MovementTrackEvent optionMsg="has moved beyond original floor" reference="marker2" entityType="Tag" trackDefn="distance2" entityID="00:0c:cc:5b:fa:4c"/>
<MovementTrackEvent state="clear" entityType="Tag"
例:
<BatteryLifeTrackEvent lastSeen="10:28:52 08 Jun 2009" batteryStatus="medium" trackDefn="defn1" entityType="Tag" entityID="00:01:02:03:04:06"/>
例:
<MovementTrackEvent distance="158.11388300841898" triggerDistance="5.0" reference="marker1" referenceObjectID="1" trackDefn="defn1" entityType="Mobile Station" entityID="00:01:02:03:04:05"/>
例:
<ChokepointTrackEvent lastSeen="11:10:08 PST 08 Jun 2009" chokepointMac=“00:0c:cc:60:13:a3” chokepointName= “chokeA3” trackDefn=“choke" entityType="Tag" entityID="00:12:b8:00:20:4f”/>
クリア状態の例を次に示します。
<ChokepointTrackEvent state="clear" entityType="Tag" trackDefn="choke" entityID=”00:12:b8:00:20:4f”/>
要素のロケーションの例を次に示します。
<ChokepointTrackEvent lastSeen=”11:36:46 PST June 08 2009" emergencyReason= “detached” trackDefn="emer" entityType="Tag" entityID=”00:12:b8:00:20:50”/>
![]() (注) |
[Emergency] イベントがクリアされることはありません。 |
![]() (注) |
[Services] > [Context Aware Notifications] ページは、ルート仮想ドメインでのみ使用可能です。 ここでは、次の内容について説明します。 |
イベント グループを追加するには、次の手順を実行します。
イベント グループを削除するには、次の手順を実行します。
ここでは、イベント定義の追加、削除、およびテスト方法について説明します。内容は次のとおりです。
イベント定義を追加するには、次の手順を実行します。
ステップ 1 | [Services] > [Context Aware Notifications] を選択します。 | ||||||||||||
ステップ 2 | 左側のサイドバーのメニューから、[Notification Definitions] を選択します。 | ||||||||||||
ステップ 3 | イベント定義を追加するグループの名前をクリックします。 イベント グループの既存のイベント定義が示された [Event Settings] ページが表示されます。 | ||||||||||||
ステップ 4 | [Select a command] ドロップダウン リストから、[Add Event Definition] を選択します。 [Go] をクリックします。 | ||||||||||||
ステップ 5 |
[Conditions] タブで、1 つ以上の条件を追加します。 追加する条件ごとに、イベント通知を生成するためのルールを指定します。
条件を追加するには、次の手順を実行します。
|
Prime Infrastructure から 1 つ以上のイベント定義を削除するには、次の手順に従います。
イベント定義の 1 つ以上のイベント通知をテストするには、次の手順に従ってください。
Prime Infrastructureは、通知リスナーとして動作します。 Prime Infrastructure はトラップをユーザ インターフェイス アラートに変換し、次の形式で表示します。
不明 (不在)
Absence of Tag with MAC 00:0c:cc:5b:e4:1b, last seen at 16:19:45 08 June 2009.In/Out (特定のエリア)
Tag with MAC 00:0c:cc:5b:fa:44 is In the Area 'Rochester > Rochester > 5th Floor > nycTestArea'距離
Tag with MAC 00:0c:cc:5b:fa:47 has moved beyond the distance configured for the marker 'marker2'. Tag with MAC 00:0c:cc:5b:f9:b9 has moved beyond 46.0 ft. of marker 'marker2', located at a range of 136.74526528595058 ft.
バッテリー レベル
Tag 00:01:02:03:04:06 has medium battery, last seen 11:06:01 08 June 2009
位置変更
Tag 00:01:02:03:04:06 has medium battery, last seen 11:06:01 08 June 2009
位置変更
Mobile Station 00:01:02:03:04:05 has moved
158.11388300841898ft, where the trigger distance was 5.0
目次
Cisco Prime Infrastructure では、Mobility Services Engine に通知を特定のリスナーに送信させる条件を定義できます。 この章では、イベントおよびイベント グループの定義方法とイベント通知の概要の表示方法について説明します。
![]() (注) |
[Services] タブの [Mobility Services Engines]、[Synchronize Services]、[Synchronization History]、[High Availability]、[Context Aware Notifications]、および [MSAP] ページは、リリース 7.3.101.0 の仮想ドメインでのみ使用できます。 |
この章の内容は、次のとおりです。
イベント グループ:イベント通知を編成しやすくなります。
イベント定義:イベント定義には、イベントを発生させた条件、イベントが適用されるアセット、イベント通知の宛先が含まれます。
イベント通知:Mobility Services Engine は、次の転送メカニズムを介して、登録されたリスナーにイベント通知を送信します。
ここでは、次の内容について説明します。
Mobility Services Engine は、イベント通知を送信しますが、イベントを保存しません。 ただし、通知イベントの宛先が Prime Infrastructure の場合、Prime Infrastructure は受信した通知を保存し、次に示す 7 つのカテゴリに分類します。
[Absence (Missing)]:Mobility Services Engine は、アセットが不明になった場合に Absence イベントを生成します。 つまり、Mobility Services Engine は、指定された時間で WLAN のアセットを検出できません。
[In/Out Area (Containment)]:Mobility Services Engine は、アセットが指定エリアに移動するかエリアから出ると Containment イベントを生成します。
![]() (注) |
Containment エリア(キャンパス、ビルディング、またはフロア)は、[Monitor] > [Maps] で定義します。 カバレッジ エリアを定義するには、Map Editor を使用します。 |
[Movement from Marker (Movement/Distance)]:Mobility Services Engine は、マップで定義した指定マーカーから指定された距離を超えてアセットが移動された場合、Movement イベントを生成します。
[Location Changes]:Mobility Services Engine は、クライアント ステーション、アセット タグ、不正クライアント、または不正アクセス ポイントのロケーションが変更されると Location Changes イベントを生成します。
[Battery Level]:Mobility Services Engine は、追跡されるすべてのアセット タグについて Battery Level イベントを生成します。
[Emergency]:Mobility Services Engine は、タグのパニック ボタンがトリガーされるか、タグが削除されるか、改ざんされるか、非アクティブになるか、不明な状態を報告すると、Cisco CX v.1 準拠のアセット タグの Emergency イベントを生成します。 この情報は、Cisco CX v.1 準拠のタグについてのみ、報告および表示されます。
[Chokepoint Notifications]:Mobility Services Engine は、タグがチョークポイントによって誘導されたときにイベントを生成します。 この情報は、Cisco CX v.1 準拠のタグについてのみ、報告および表示されます。
![]() (注) |
すべての要素のイベントは時間単位と日単位で要約されます。 |
![]() (注) |
トラック グループとイベントは、Mobility Services Engine と同期する必要があります。 |
[Missing (Absence)]:要素(クライアント、タグ、不正アクセス ポイント、または不正クライアント)が再表示される。
[In/Out Area (Containment)]:要素が Containment エリア内に戻るか、このエリアから外に出る。
[Distance]:要素がマーカーから指定された距離以内に戻る。
[Location Changes]:クリア状態はこの条件には適用されません。
[Battery Level]:タグが検出され、普通の電池残量で動作している。
![]() (注) |
Prime Infrastructure の [Notifications Summary] ページには、クリアされたイベント条件の通知を受信したかどうかが反映されます。 |
通知をテキスト形式で送信するように指定すると、Mobility Services Engine は、状態を示すためにプレーン テキストの文字列を使用します。
Tag 00:02:02:03:03:04 is in Floor <floorName> Tag 00:02:02:03:03:04 is outside Floor <floorName> Client 00:02:02:03:09:09 is in Area <areaName> RogueClient 00:02:02:08:08:08 is outside Building <buildingName> Tag 00:02:02:03:03:06 has moved 105 feet where the trigger distance was 90 feet. Tag 00:02:02:03:03:20 missing for 14 mins, last seen <timestamp>.
![]() (注) |
シスコは、テキストの通知形式を予告なしに変更する権利を保持します。 |
![]() (注) |
XML は、通知の内容を解析または分析する必要があるシステムの推奨形式です。 |
Absence 要素のメッセージ形式:
<AbsenceTrackEvent missingFor="<time in secs entity has been missing>" lastSeen="time last seen" trackDefn="<name of track definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
クリア状態のメッセージ形式:
<AbsenceTrackEvent state="clear" trackDefn="<name of track definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
次に例を示します。
<AbsenceTrackEvent state="set" missingFor="34" lastSeen="15:00:20 08 Jun 2009" trackDefn="absenceDef1" entityType="Mobile Station" entityID="00:0c:f1:53:9e:c0"/> <AbsenceTrackEvent state="clear" entityType="Tag" trackDefn="absenceDef1" entityID="00:0c:cc:5b:fc:da"/>
Containment 要素のメッセージ形式:
<ContainmentTrackEvent in="true | false" trackDefn="<name of track definition>" containerType="Floor | Area | Network Design | Building" containerID="<fully quality name of container>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
クリア状態のメッセージ形式:
<ContainmentTrackEvent state="clear" trackDefn="<name of track definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
次に例を示します。
<ContainmentTrackEvent in="true" trackDefn="myContainerRule1" containerType="Area" containerID="nycTestArea,5th Floor,Bldg-A,Rochester_Group,Rochester,"
![]() (注) |
containerID ストリングは、キャンパス Rochester の Bldg-A の 5 階にある nycTestArea というカバレッジ エリアを表します。 |
entityType="Tag" entityID="00:0c:cc:5b:fa:44"/> <ContainmentTrackEvent state="clear" entityType="Tag" trackDefn="myContainerRule1" entityID="00:0c:cc:5b:f8:ab"/>
同じフロアにある要素のメッセージ形式:
<MovementTrackEvent distance="<distance in feet at which the element was located>" triggerDistance="<the distance specified on the condition" reference="<name of the marker specified on the condition>" trackDefn="<name of event definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
別のフロアにある要素のメッセージ形式:
<MovementTrackEvent optionMsg="has moved beyond original floor" reference="<name of the marker specified on the condition>" trackDefn="<name of event definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
クリア状態のメッセージ形式:
<MovementTrackEvent state="clear" trackDefn="<name of event definition>" entityType="Mobile Station | Tag | Rogue AP | Rogue Client" entityID="<mac address"/>
次に例を示します。
<MovementTrackEvent distance="115.73819627990147" triggerDistance="60.0" reference="marker2" trackDefn="distance2" entityType="Mobile Station" entityID="00:0c:41:15:99:92"/>
<MovementTrackEvent optionMsg="has moved beyond original floor" reference="marker2" entityType="Tag" trackDefn="distance2" entityID="00:0c:cc:5b:fa:4c"/>
<MovementTrackEvent state="clear" entityType="Tag"
例:
<BatteryLifeTrackEvent lastSeen="10:28:52 08 Jun 2009" batteryStatus="medium" trackDefn="defn1" entityType="Tag" entityID="00:01:02:03:04:06"/>
例:
<MovementTrackEvent distance="158.11388300841898" triggerDistance="5.0" reference="marker1" referenceObjectID="1" trackDefn="defn1" entityType="Mobile Station" entityID="00:01:02:03:04:05"/>
例:
<ChokepointTrackEvent lastSeen="11:10:08 PST 08 Jun 2009" chokepointMac=“00:0c:cc:60:13:a3” chokepointName= “chokeA3” trackDefn=“choke" entityType="Tag" entityID="00:12:b8:00:20:4f”/>
クリア状態の例を次に示します。
<ChokepointTrackEvent state="clear" entityType="Tag" trackDefn="choke" entityID=”00:12:b8:00:20:4f”/>
![]() (注) |
[Services] > [Context Aware Notifications] ページは、ルート仮想ドメインでのみ使用可能です。 ここでは、次の内容について説明します。 |
ここでは、イベント定義の追加、削除、およびテスト方法について説明します。内容は次のとおりです。
ステップ 1 | [Services] > [Context Aware Notifications] を選択します。 | ||||||||||||
ステップ 2 | 左側のサイドバーのメニューから、[Notification Definitions] を選択します。 | ||||||||||||
ステップ 3 | イベント定義を追加するグループの名前をクリックします。 イベント グループの既存のイベント定義が示された [Event Settings] ページが表示されます。 | ||||||||||||
ステップ 4 | [Select a command] ドロップダウン リストから、[Add Event Definition] を選択します。 [Go] をクリックします。 | ||||||||||||
ステップ 5 |
[Conditions] タブで、1 つ以上の条件を追加します。 追加する条件ごとに、イベント通知を生成するためのルールを指定します。
条件を追加するには、次の手順を実行します。
|
Prime Infrastructureは、通知リスナーとして動作します。 Prime Infrastructure はトラップをユーザ インターフェイス アラートに変換し、次の形式で表示します。
不明 (不在)
Absence of Tag with MAC 00:0c:cc:5b:e4:1b, last seen at 16:19:45 08 June 2009.In/Out (特定のエリア)
Tag with MAC 00:0c:cc:5b:fa:44 is In the Area 'Rochester > Rochester > 5th Floor > nycTestArea'距離
Tag with MAC 00:0c:cc:5b:fa:47 has moved beyond the distance configured for the marker 'marker2'. Tag with MAC 00:0c:cc:5b:f9:b9 has moved beyond 46.0 ft. of marker 'marker2', located at a range of 136.74526528595058 ft.
バッテリー レベル
Tag 00:01:02:03:04:06 has medium battery, last seen 11:06:01 08 June 2009
位置変更
Tag 00:01:02:03:04:06 has medium battery, last seen 11:06:01 08 June 2009
位置変更
Mobile Station 00:01:02:03:04:05 has moved
158.11388300841898ft, where the trigger distance was 5.0