Cisco Unity Connection System Administration Guide, Release 1.x - Setting Up Broadcast Messaging [Cisco Unity Connection]

Table Of Contents

Setting Up Broadcast Messaging

System Broadcast Messages Overview

Setting Up the Broadcast Message Administrator

Changing Broadcast Message Administrator Defaults

Setting Up Access to the Broadcast Message Administrator

Creating a Call Handler to Send Users to the Broadcast Message Administrator

Setting Up a One-Key Dialing Option to Send Users to the Broadcast Message Administrator

Setting Up a Special Phone Number and Routing Rule to Send Users to the Broadcast Message Administrator

Enabling Users to Send and Update System Broadcast Messages

Using the Broadcast Message Administrator to Send and Update System Broadcast Messages

Setting Up Broadcast Messaging

System broadcast messages are recorded announcements sent to everyone in an organization. You determine whether users can use the Cisco Unity Connection Broadcast Message Administrator to send and/or update broadcast messages. (By default, Cisco Unity Connection users are not enabled to use the Broadcast Message Administrator.)

See the following sections in this chapter:

•System Broadcast Messages Overview

•Setting Up the Broadcast Message Administrator

•Enabling Users to Send and Update System Broadcast Messages

•Using the Broadcast Message Administrator to Send and Update System Broadcast Messages

System Broadcast Messages Overview

Although system broadcast messages may sound similar to regular voice messages, they are not simply voice messages sent to a large distribution list. They are unique in the following ways:

•System broadcast messages are played immediately after users log on to Cisco Unity Connection by phone—even before they hear message counts for new and saved messages. After logging on, users hear how many system broadcast messages they have and Connection begins playing them.

•For each system broadcast message, the sender specifies how long Connection will broadcast the message. The sender can specify that a system broadcast message is "active" for a day, a week, a month—even indefinitely. A user will hear the system broadcast message the first time the user logs on to Connection during the period that the message is active.

•Users must listen to each system broadcast message in its entirety before Connection allows them to hear new and saved messages or to change setup options. Users cannot fast-forward or skip a system broadcast message.

•If a user hangs up before playing the entire system broadcast message, the message plays again the next time that the user logs on to Connection by phone (assuming that the message is still active).

•When a user has finished playing a system broadcast message, the message can either be replayed or permanently deleted. Users cannot respond to, forward, or save system broadcast messages.

•Users can receive an unlimited number of system broadcast messages.

•Users receive system broadcast messages even when they exceed their mailbox size limits and are no longer able to receive other messages. Because of the way that the messages are stored on the Connection server, they are not included in the total mailbox size for each user.

•New users hear all active broadcast messages immediately after they enroll as a Connection user.

•System broadcast messages do not trigger message waiting indicators (MWIs) on user phones. They also do not trigger message notifications for alternative devices, such as a pager or another phone.

•Users do not receive system broadcast messages in the Cisco Unity Inbox.

Setting Up the Broadcast Message Administrator

See the following sections:

•Changing Broadcast Message Administrator Defaults

•Setting Up Access to the Broadcast Message Administrator

Changing Broadcast Message Administrator Defaults

Default behavior for the Broadcast Message Administrator is controlled by settings on the System Settings > Advanced > Conversations page in Cisco Unity Connection Administration. Optionally, you can make changes to the system defaults, as follows:

•Default Active Days—Indicates the number of days that a system broadcast message remains active when the sender does not specify an end date and time. The default is 30 days. To change how long a message without an end date and time remains active, enter a number from zero (0) to 365 days. A value of zero (0) days means that messages that are sent without a specified end date and time will remain active indefinitely.

•Check Frequency—Indicates how often Connection checks for new system broadcast messages. By default, Connection checks for new messages every five minutes. To change this setting, enter a number from 1 to 60 minutes. Note that you must stop and restart the CsBMsgConnector service for the change to take effect. (On the Windows Start menu, click Programs > Administrative Tools > Services. Then right-click CsBMsgConnector to stop and start the service.)

•Maximum Recording Length—Indicates the maximum length allowed for system broadcast messages. By default, senders can record messages up to 300,000 milliseconds (5 minutes) in length. To change the maximum recording length, enter a number from 30,000 to 360,000 milliseconds.

•Play Oldest Message First—Indicates the order in which Connection presents system broadcast messages to users. By default, the check box is checked, which sets Connection to play the oldest message first. To have the newest message played first, uncheck the check box.

•Retention Period—Indicates how long Connection retains expired system broadcast messages on the server. By default, Connection purges the WAV file and any data associated with a message 30 days after its end date and time. To change the retention period for expired broadcast messages, enter a number from 1 to 60 days.

Setting Up Access to the Broadcast Message Administrator

To send a system broadcast message, Cisco Unity Connection users log on to the Broadcast Message Administrator, which is a special conversation that allows them to send and update system broadcast messages.

You can give users access to the Broadcast Message Administrator in one of the following ways:

•Creating a Call Handler to Send Users to the Broadcast Message Administrator

•Setting Up a One-Key Dialing Option to Send Users to the Broadcast Message Administrator

•Setting Up a Special Phone Number and Routing Rule to Send Users to the Broadcast Message Administrator

Creating a Call Handler to Send Users to the Broadcast Message Administrator

You can create a new call handler, assign it a unique extension, and specify the Broadcast Message Administrator as the destination to which Connection sends the user after hearing the greeting. To make the transfer quick and seamless to users, select a blank greeting for the call handler.

Use the following procedure:

To Create a Call Handler to Send Users to the Broadcast Message Administrator

Step 1 In Cisco Unity Connection Administration, expand Call Management, then click System Call Handlers.

Step 2 On the Search Call Handlers page, click Add New.

Step 3 On the New Call Handler page, enter a display name and the extension that users can dial to reach the call handler.

Step 4 Select the call handler template on which to base the new call handler.

Step 5 Click Save. The Edit Call Handler page for the call handler you are creating opens.

Step 6 Enter additional settings, as applicable. If you add or change any settings, click Save.

Step 7 If you want to set up a one-key dialing option for the call handler, so that callers can reach the Broadcast Message Administrator by pressing a key while listening to the greeting, continue with the "To Set Up a One-Key Dialing Option from a Call Handler for Accessing the Broadcast Message Administrator" procedure.

Setting Up a One-Key Dialing Option to Send Users to the Broadcast Message Administrator

You can specify that Connection will send a caller to the Broadcast Message Administrator (on the Caller Input page for any call handler or user greeting) when a caller presses a particular key during the greeting.

To set up a one-key dialing option for accessing the Broadcast Message Administrator, use one of the following procedures:

•To Set Up a One-Key Dialing Option from a Call Handler for Accessing the Broadcast Message Administrator

•To Set Up a One-Key Dialing Option from a User Greeting for Accessing the Broadcast Message Administrator

To Set Up a One-Key Dialing Option from a Call Handler for Accessing the Broadcast Message Administrator

Step 1 In Cisco Unity Connection Administration, expand Call Management, then click System Call Handlers.

Step 2 On the Search Call Handler page, in the Search Results table, click the display name of the applicable call handler.

If you want to set up access to the Broadcast Message Administrator from the opening greeting, click the Opening Greeting call handler. Or click the display name of another call handler that you have created for this purpose.

Note If the call handler you want to modify does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Find.

Step 3 On the Edit Call Handler page, on the Edit menu, click Caller Input.

Step 4 In the Single Key Settings table, click the applicable touchtone key.

Step 5 On the Edit Caller Input page for the key you have selected, check the Locked check box.

Note If you are setting up one-key dialing from the Opening Greeting, ensure that the touchtone key you select to lock is not the first digit of any of the extensions in your system. If it is, locking the key will prevent callers from dialing an extension while listening to the Opening Greeting. Instead, select a key that is not the first digit of any extension.

Step 6 Click Conversation, and then click Broadcast Message Administrator.

Step 7 Optionally, you can rerecord the greeting to mention the key that callers can press in the call handler greeting. (For example, "...for the Cisco Unity Connection Broadcast Message Administrator, press 3.")

Step 8 Click Save.

To Set Up a One-Key Dialing Option from a User Greeting for Accessing the Broadcast Message Administrator

Step 1 In Cisco Unity Connection Administration, click Users.

Step 2 On the Search Users page, in the Search Results table, click the alias of the applicable user.

Note If the user alias does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Search.

Step 3 On the User Basics page, on the Edit menu, click Caller Input.

Step 4 In the Single Key Settings table, click the applicable touchtone key.

Step 5 On the Edit Caller Input page for the key you have selected, check the Locked check box.

Step 6 Click Conversation, and then click Broadcast Message Administrator.

Step 7 Optionally, you can rerecord the greeting to mention the key that callers can press while listening to the user greeting. (For example, "...for the Cisco Unity Connection Broadcast Message Administrator, press 3.")

Step 8 Click Save.

Setting Up a Special Phone Number and Routing Rule to Send Users to the Broadcast Message Administrator

See the documentation for the phone system to set up a new phone number. Then use the following procedure to create a routing rule that sends any call that arrives for the new number to the Broadcast Message Administrator conversation.

To Add a Routing Rule to Send Callers to the Broadcast Message Administrator

Step 1 In Cisco Unity Connection Administration, expand Call Management > Call Routing, then click Direct Routing Rules.

Step 2 On the Search Direct Rules page, click Add New.

Step 3 On the New Direct Rule page, enter a display name for the new routing rule, and click Save.

Step 4 On the Edit Direct Rule page, confirm that the Status is set to Active.

Step 5 In the Dialed Number field, enter the phone number that has been set up for access to the Broadcast Message Administrator.

Step 6 In the Send Call To field, click Conversation, and then click Broadcast Message Administrator.

Step 7 Click Save.

Step 8 On the Search Direct Rules page, verify that the new routing rule is in an appropriate position with the other routing rules in the table. If you want to change the rule order, continue with Step 9.

Step 9 Click Change Order.

Step 10 On the Edit Direct Routing Rule Order page, click the name of the rule you want to reorder, and click the down arrow or the up arrow until the rules appear in the correct order. Click Save.

Step 11 Distribute the new number to callers who are enabled to send and/or update system broadcast messages.

Enabling Users to Send and Update System Broadcast Messages

Because system broadcast messages are designed to convey important and often time-sensitive information to a large number of users at once, Cisco Unity Connection users can use the Broadcast Message Administrator only if they are enabled to do so in Cisco Unity Connection Administration. By default, Connection users are not enabled to use the Broadcast Message Administrator to send or update system broadcast messages.

In Connection Administration, you can specify whether users can send system broadcast messages to all users on the local Connection server, and whether users can update system broadcast messages stored on the local Connection server. If you want to enable an existing group of users to send system broadcast messages, you can use the Bulk Edit tool available in Tools Depot.

Consider how users in your organization might use system broadcast messaging when determining which Connection users can send them, and whether they will need to update messages. For example, you may want to send a welcome message to users on a new system or remind all Connection users to change their phone passwords. You may also want to use system broadcast messages as a way to train users on how to use Connection features or to summarize changes to Connection after an upgrade. Other Connection users—such as network administrators, members of management, Human Resources personnel, and facilities managers—may also need to send system broadcast messages to announce planned network outages, organization-wide goals and personnel changes, branch office closures for holidays, security alerts, and the like.

Use the following procedures to enable users to send and update system broadcast messages:

•Do the "To Enable Sending and Updating System Broadcast Messages in a User Template" procedure to allow a group of users to send and update system broadcast messages. (Note that changes to settings in a template do not affect any of the existing user accounts that were based on that template; your updates to the template settings will affect only those users whose accounts are created after you make the updates.)

•Do the "To Enable an Existing User to Send and Update System Broadcast Messages" procedure to allow an existing user to send and update system broadcast messages. Alternatively, you can use the Bulk Edit utility in Tools Depot to modify multiple user accounts at once. See Bulk Edit Help for details.

To Enable Sending and Updating System Broadcast Messages in a User Template

Step 1 In Cisco Unity Connection Administration, expand Templates, then click User Template.

Step 2 On the Search User Templates page, in the Search Results table, click the alias of the applicable user template.

Note If the user template does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Find.

Step 3 On the Edit User Template page, on the Edit menu, click Send Message Settings.

Step 4 Under Broadcast Messages, check the applicable check boxes:

•User Can Send Broadcast Messages to Users on This Server—Check this check box to allow users to send system broadcast messages to all users on the local Connection server.

•User Can Update Broadcast Messages Stored on This Server—Check this check box to allow users to edit system broadcast messages stored on the local Connection server.

Note We recommend that you check both check boxes so that the sender of a broadcast message is also enabled to update the message.

Step 5 Click Save.

To Enable an Existing User to Send and Update System Broadcast Messages

Step 1 In Cisco Unity Connection Administration, click Users.

Step 2 On the Search Users page, in the Search Results table, click the alias of the applicable user.

Note If the user alias does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Find.

Step 3 On the User Basics page, on the Edit menu, click Send Message Settings.

Step 4 Under Broadcast Messages, check the applicable check boxes:

•User Can Send Broadcast Messages to Users on This Server—Check this check box to allow users to send system broadcast messages to all users on the local Connection server.

•User Can Update Broadcast Messages Stored on This Server—Check this check box to allow users to edit system broadcast messages stored on the local Connection server.

Note We recommend that you check both check boxes so that the sender of a broadcast message is also enabled to update the message.

Step 5 Click Save.

Using the Broadcast Message Administrator to Send and Update System Broadcast Messages

Users who are able to send system broadcast messages can use the Broadcast Message Administrator to do the following tasks:

•Record and send one or more system broadcast messages.

•Define when a system broadcast message becomes active and for how long. Unless otherwise specified by the sender, each message is set by default to broadcast immediately and to remain active for 30 days. Senders can set a future date and time for the message to be broadcast, and can specify that a system broadcast message is "active" for a day, a week, a month—even indefinitely. (Date and times reflect the time zone for the user who sends the message, not those who receive it.)

To change default behavior, see the "Changing Broadcast Message Administrator Defaults" section.

Note that if a sender hangs up or is disconnected while creating a broadcast message, but before sending it, Cisco Unity Connection deletes the recording.

Users who are able to update system broadcast messages can use the Broadcast Message Administrator to do the following tasks on the local Connection server:

•Review active messages. (If there is more than one active message, the Broadcast Message Administrator presents them in order based on the start date and time, starting with the newest messages.)

•Change the end date and time for active messages.

•Change or add to a recording for future messages. (Note that Connection enforces the total message length limit even when material is added to a message.)

•Change the start date and time and/or the end date and time for future messages. (Note that the end date and time does not adjust automatically if senders change the start date and time but do not change the end date and time.)

•Delete active and future messages. (Note that Connection does not report which users have already played an active message.)

	Cisco Unity Connection System Administration Guide, Release 1.x
	Setting Up Broadcast Messaging
Cisco Unity Connection System Administration Guide, Release 1.x Index Preface Administrative Tools Call Management Overview Creating a Call Management Plan Managing Call Handlers Managing Directory Handlers Managing Interview Handlers Managing Call Routing Tables Managing Schedules and Holidays Managing Restriction Tables Cisco Unity Connection Conversation Changing Conversation Settings Changing the Audio Format of Recordings, Prompts, and Media Streams Messaging Message Aging Policy Setting Up Message Notification Setting Up Private and Secure Messaging Setting Up Broadcast Messaging Managing System Distribution Lists Managing Recorded Greetings and Recorded Names Managing the Phone System Integrations Generating System Configuration and Call Management Reports Accessing and Using Cisco Unity Connection Administration	Download this chapter Setting Up Broadcast Messaging Download the complete book PDF Version of Entire Book (PDF - 4 MB) Feedback Table Of Contents Setting Up Broadcast Messaging System Broadcast Messages Overview Setting Up the Broadcast Message Administrator Changing Broadcast Message Administrator Defaults Setting Up Access to the Broadcast Message Administrator Creating a Call Handler to Send Users to the Broadcast Message Administrator Setting Up a One-Key Dialing Option to Send Users to the Broadcast Message Administrator Setting Up a Special Phone Number and Routing Rule to Send Users to the Broadcast Message Administrator Enabling Users to Send and Update System Broadcast Messages Using the Broadcast Message Administrator to Send and Update System Broadcast Messages Setting Up Broadcast Messaging System broadcast messages are recorded announcements sent to everyone in an organization. You determine whether users can use the Cisco Unity Connection Broadcast Message Administrator to send and/or update broadcast messages. (By default, Cisco Unity Connection users are not enabled to use the Broadcast Message Administrator.) See the following sections in this chapter: •System Broadcast Messages Overview •Setting Up the Broadcast Message Administrator •Enabling Users to Send and Update System Broadcast Messages •Using the Broadcast Message Administrator to Send and Update System Broadcast Messages System Broadcast Messages Overview Although system broadcast messages may sound similar to regular voice messages, they are not simply voice messages sent to a large distribution list. They are unique in the following ways: •System broadcast messages are played immediately after users log on to Cisco Unity Connection by phone—even before they hear message counts for new and saved messages. After logging on, users hear how many system broadcast messages they have and Connection begins playing them. •For each system broadcast message, the sender specifies how long Connection will broadcast the message. The sender can specify that a system broadcast message is "active" for a day, a week, a month—even indefinitely. A user will hear the system broadcast message the first time the user logs on to Connection during the period that the message is active. •Users must listen to each system broadcast message in its entirety before Connection allows them to hear new and saved messages or to change setup options. Users cannot fast-forward or skip a system broadcast message. •If a user hangs up before playing the entire system broadcast message, the message plays again the next time that the user logs on to Connection by phone (assuming that the message is still active). •When a user has finished playing a system broadcast message, the message can either be replayed or permanently deleted. Users cannot respond to, forward, or save system broadcast messages. •Users can receive an unlimited number of system broadcast messages. •Users receive system broadcast messages even when they exceed their mailbox size limits and are no longer able to receive other messages. Because of the way that the messages are stored on the Connection server, they are not included in the total mailbox size for each user. •New users hear all active broadcast messages immediately after they enroll as a Connection user. •System broadcast messages do not trigger message waiting indicators (MWIs) on user phones. They also do not trigger message notifications for alternative devices, such as a pager or another phone. •Users do not receive system broadcast messages in the Cisco Unity Inbox. Setting Up the Broadcast Message Administrator See the following sections: •Changing Broadcast Message Administrator Defaults •Setting Up Access to the Broadcast Message Administrator Changing Broadcast Message Administrator Defaults Default behavior for the Broadcast Message Administrator is controlled by settings on the System Settings > Advanced > Conversations page in Cisco Unity Connection Administration. Optionally, you can make changes to the system defaults, as follows: •Default Active Days—Indicates the number of days that a system broadcast message remains active when the sender does not specify an end date and time. The default is 30 days. To change how long a message without an end date and time remains active, enter a number from zero (0) to 365 days. A value of zero (0) days means that messages that are sent without a specified end date and time will remain active indefinitely. •Check Frequency—Indicates how often Connection checks for new system broadcast messages. By default, Connection checks for new messages every five minutes. To change this setting, enter a number from 1 to 60 minutes. Note that you must stop and restart the CsBMsgConnector service for the change to take effect. (On the Windows Start menu, click Programs > Administrative Tools > Services. Then right-click CsBMsgConnector to stop and start the service.) •Maximum Recording Length—Indicates the maximum length allowed for system broadcast messages. By default, senders can record messages up to 300,000 milliseconds (5 minutes) in length. To change the maximum recording length, enter a number from 30,000 to 360,000 milliseconds. •Play Oldest Message First—Indicates the order in which Connection presents system broadcast messages to users. By default, the check box is checked, which sets Connection to play the oldest message first. To have the newest message played first, uncheck the check box. •Retention Period—Indicates how long Connection retains expired system broadcast messages on the server. By default, Connection purges the WAV file and any data associated with a message 30 days after its end date and time. To change the retention period for expired broadcast messages, enter a number from 1 to 60 days. Setting Up Access to the Broadcast Message Administrator To send a system broadcast message, Cisco Unity Connection users log on to the Broadcast Message Administrator, which is a special conversation that allows them to send and update system broadcast messages. You can give users access to the Broadcast Message Administrator in one of the following ways: •Creating a Call Handler to Send Users to the Broadcast Message Administrator •Setting Up a One-Key Dialing Option to Send Users to the Broadcast Message Administrator •Setting Up a Special Phone Number and Routing Rule to Send Users to the Broadcast Message Administrator Creating a Call Handler to Send Users to the Broadcast Message Administrator You can create a new call handler, assign it a unique extension, and specify the Broadcast Message Administrator as the destination to which Connection sends the user after hearing the greeting. To make the transfer quick and seamless to users, select a blank greeting for the call handler. Use the following procedure: To Create a Call Handler to Send Users to the Broadcast Message Administrator Step 1 In Cisco Unity Connection Administration, expand Call Management, then click System Call Handlers. Step 2 On the Search Call Handlers page, click Add New. Step 3 On the New Call Handler page, enter a display name and the extension that users can dial to reach the call handler. Step 4 Select the call handler template on which to base the new call handler. Step 5 Click Save. The Edit Call Handler page for the call handler you are creating opens. Step 6 Enter additional settings, as applicable. If you add or change any settings, click Save. Step 7 If you want to set up a one-key dialing option for the call handler, so that callers can reach the Broadcast Message Administrator by pressing a key while listening to the greeting, continue with the "To Set Up a One-Key Dialing Option from a Call Handler for Accessing the Broadcast Message Administrator" procedure. Setting Up a One-Key Dialing Option to Send Users to the Broadcast Message Administrator You can specify that Connection will send a caller to the Broadcast Message Administrator (on the Caller Input page for any call handler or user greeting) when a caller presses a particular key during the greeting. To set up a one-key dialing option for accessing the Broadcast Message Administrator, use one of the following procedures: •To Set Up a One-Key Dialing Option from a Call Handler for Accessing the Broadcast Message Administrator •To Set Up a One-Key Dialing Option from a User Greeting for Accessing the Broadcast Message Administrator To Set Up a One-Key Dialing Option from a Call Handler for Accessing the Broadcast Message Administrator Step 1 In Cisco Unity Connection Administration, expand Call Management, then click System Call Handlers. Step 2 On the Search Call Handler page, in the Search Results table, click the display name of the applicable call handler. If you want to set up access to the Broadcast Message Administrator from the opening greeting, click the Opening Greeting call handler. Or click the display name of another call handler that you have created for this purpose. Note If the call handler you want to modify does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Find. Step 3 On the Edit Call Handler page, on the Edit menu, click Caller Input. Step 4 In the Single Key Settings table, click the applicable touchtone key. Step 5 On the Edit Caller Input page for the key you have selected, check the Locked check box. Note If you are setting up one-key dialing from the Opening Greeting, ensure that the touchtone key you select to lock is not the first digit of any of the extensions in your system. If it is, locking the key will prevent callers from dialing an extension while listening to the Opening Greeting. Instead, select a key that is not the first digit of any extension. Step 6 Click Conversation, and then click Broadcast Message Administrator. Step 7 Optionally, you can rerecord the greeting to mention the key that callers can press in the call handler greeting. (For example, "...for the Cisco Unity Connection Broadcast Message Administrator, press 3.") Step 8 Click Save. To Set Up a One-Key Dialing Option from a User Greeting for Accessing the Broadcast Message Administrator Step 1 In Cisco Unity Connection Administration, click Users. Step 2 On the Search Users page, in the Search Results table, click the alias of the applicable user. Note If the user alias does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Search. Step 3 On the User Basics page, on the Edit menu, click Caller Input. Step 4 In the Single Key Settings table, click the applicable touchtone key. Step 5 On the Edit Caller Input page for the key you have selected, check the Locked check box. Step 6 Click Conversation, and then click Broadcast Message Administrator. Step 7 Optionally, you can rerecord the greeting to mention the key that callers can press while listening to the user greeting. (For example, "...for the Cisco Unity Connection Broadcast Message Administrator, press 3.") Step 8 Click Save. Setting Up a Special Phone Number and Routing Rule to Send Users to the Broadcast Message Administrator See the documentation for the phone system to set up a new phone number. Then use the following procedure to create a routing rule that sends any call that arrives for the new number to the Broadcast Message Administrator conversation. To Add a Routing Rule to Send Callers to the Broadcast Message Administrator Step 1 In Cisco Unity Connection Administration, expand Call Management > Call Routing, then click Direct Routing Rules. Step 2 On the Search Direct Rules page, click Add New. Step 3 On the New Direct Rule page, enter a display name for the new routing rule, and click Save. Step 4 On the Edit Direct Rule page, confirm that the Status is set to Active. Step 5 In the Dialed Number field, enter the phone number that has been set up for access to the Broadcast Message Administrator. Step 6 In the Send Call To field, click Conversation, and then click Broadcast Message Administrator. Step 7 Click Save. Step 8 On the Search Direct Rules page, verify that the new routing rule is in an appropriate position with the other routing rules in the table. If you want to change the rule order, continue with Step 9. Step 9 Click Change Order. Step 10 On the Edit Direct Routing Rule Order page, click the name of the rule you want to reorder, and click the down arrow or the up arrow until the rules appear in the correct order. Click Save. Step 11 Distribute the new number to callers who are enabled to send and/or update system broadcast messages. Enabling Users to Send and Update System Broadcast Messages Because system broadcast messages are designed to convey important and often time-sensitive information to a large number of users at once, Cisco Unity Connection users can use the Broadcast Message Administrator only if they are enabled to do so in Cisco Unity Connection Administration. By default, Connection users are not enabled to use the Broadcast Message Administrator to send or update system broadcast messages. In Connection Administration, you can specify whether users can send system broadcast messages to all users on the local Connection server, and whether users can update system broadcast messages stored on the local Connection server. If you want to enable an existing group of users to send system broadcast messages, you can use the Bulk Edit tool available in Tools Depot. Consider how users in your organization might use system broadcast messaging when determining which Connection users can send them, and whether they will need to update messages. For example, you may want to send a welcome message to users on a new system or remind all Connection users to change their phone passwords. You may also want to use system broadcast messages as a way to train users on how to use Connection features or to summarize changes to Connection after an upgrade. Other Connection users—such as network administrators, members of management, Human Resources personnel, and facilities managers—may also need to send system broadcast messages to announce planned network outages, organization-wide goals and personnel changes, branch office closures for holidays, security alerts, and the like. Use the following procedures to enable users to send and update system broadcast messages: •Do the "To Enable Sending and Updating System Broadcast Messages in a User Template" procedure to allow a group of users to send and update system broadcast messages. (Note that changes to settings in a template do not affect any of the existing user accounts that were based on that template; your updates to the template settings will affect only those users whose accounts are created after you make the updates.) •Do the "To Enable an Existing User to Send and Update System Broadcast Messages" procedure to allow an existing user to send and update system broadcast messages. Alternatively, you can use the Bulk Edit utility in Tools Depot to modify multiple user accounts at once. See Bulk Edit Help for details. To Enable Sending and Updating System Broadcast Messages in a User Template Step 1 In Cisco Unity Connection Administration, expand Templates, then click User Template. Step 2 On the Search User Templates page, in the Search Results table, click the alias of the applicable user template. Note If the user template does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Find. Step 3 On the Edit User Template page, on the Edit menu, click Send Message Settings. Step 4 Under Broadcast Messages, check the applicable check boxes: •User Can Send Broadcast Messages to Users on This Server—Check this check box to allow users to send system broadcast messages to all users on the local Connection server. •User Can Update Broadcast Messages Stored on This Server—Check this check box to allow users to edit system broadcast messages stored on the local Connection server. Note We recommend that you check both check boxes so that the sender of a broadcast message is also enabled to update the message. Step 5 Click Save. To Enable an Existing User to Send and Update System Broadcast Messages Step 1 In Cisco Unity Connection Administration, click Users. Step 2 On the Search Users page, in the Search Results table, click the alias of the applicable user. Note If the user alias does not appear in the search results table, set the applicable parameters in the search fields at the top of the page, and click Find. Step 3 On the User Basics page, on the Edit menu, click Send Message Settings. Step 4 Under Broadcast Messages, check the applicable check boxes: •User Can Send Broadcast Messages to Users on This Server—Check this check box to allow users to send system broadcast messages to all users on the local Connection server. •User Can Update Broadcast Messages Stored on This Server—Check this check box to allow users to edit system broadcast messages stored on the local Connection server. Note We recommend that you check both check boxes so that the sender of a broadcast message is also enabled to update the message. Step 5 Click Save. Using the Broadcast Message Administrator to Send and Update System Broadcast Messages Users who are able to send system broadcast messages can use the Broadcast Message Administrator to do the following tasks: •Record and send one or more system broadcast messages. •Define when a system broadcast message becomes active and for how long. Unless otherwise specified by the sender, each message is set by default to broadcast immediately and to remain active for 30 days. Senders can set a future date and time for the message to be broadcast, and can specify that a system broadcast message is "active" for a day, a week, a month—even indefinitely. (Date and times reflect the time zone for the user who sends the message, not those who receive it.) To change default behavior, see the "Changing Broadcast Message Administrator Defaults" section. Note that if a sender hangs up or is disconnected while creating a broadcast message, but before sending it, Cisco Unity Connection deletes the recording. Users who are able to update system broadcast messages can use the Broadcast Message Administrator to do the following tasks on the local Connection server: •Review active messages. (If there is more than one active message, the Broadcast Message Administrator presents them in order based on the start date and time, starting with the newest messages.) •Change the end date and time for active messages. •Change or add to a recording for future messages. (Note that Connection enforces the total message length limit even when material is added to a message.) •Change the start date and time and/or the end date and time for future messages. (Note that the end date and time does not adjust automatically if senders change the start date and time but do not change the end date and time.) •Delete active and future messages. (Note that Connection does not report which users have already played an active message.)
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks