Table Of Contents
Media Resource Group Configuration
Adding a Media Resource Group
Updating a Media Resource Group
Copying a Media Resource Group
Deleting a Media Resource Group
Media Resource Group Configuration Settings
Media Resource Group Configuration
Media resource management comprises working with media resource groups and media resource group lists. Media resource management provides a mechanism for managing media resources, so that they can be shared by all Cisco CallManagers within a cluster. Media resources provide conferencing, transcoding, media termination, and music on hold services.
You can associate a Media Resource Group, a logical grouping of media servers, with a geographical location or with a site as desired. You can also form Media Resource Groups to control the usage of servers or the type of service (unicast or multicast) desired.
You can group devices of the following types into a single Media Resource Group:
•Conference Bridge (CFB)
•Media Termination Point (MTP)
•Music On Hold Server (MOH)
•Transcoder (XCODE)
Use the following topics to configure Media Resource Groups:
•Adding a Media Resource Group
•Updating a Media Resource Group
•Copying a Media Resource Group
•Deleting a Media Resource Group
•Media Resource Group Configuration Settings
•Understanding Media Resources, Cisco CallManager System Guide
•Media Resource Group and Media Resource Group List Configuration Checklist, Cisco CallManager System Guide
Related Topics
•"Media Resource Group List Configuration"
Adding a Media Resource Group
Perform the following procedure to add a Media Resource Group.
Note You cannot delete a media resource, such as a conference bridge, that is part of a Media Resource Group unless you first remove the resource from the Media Resource Group or you delete the Media Resource Group that contains the media resource.
Procedure
Step 1 Choose Service > Media Resource Group.
The Media Resource Group Configuration window displays. The Media Resource Group: New title displays with a Status: Ready indicator.
Step 2 In the Media Resource Groups list, choose <Add New Media Resource Group>.
Step 3 Enter the appropriate settings as described in Table 28-1. At any point, click the Cancel Changes button to clear all input if necessary.
Step 4 Click Insert.
The Status changes from Ready to Insert completed. The Media Resource Groups list now includes the new Media Resource Group.
Related Topics
•Updating a Media Resource Group
•Copying a Media Resource Group
•Deleting a Media Resource Group
•Media Resource Group Configuration Settings
•Understanding Media Resources, Cisco CallManager System Guide
•Media Resource Group and Media Resource Group List Configuration Checklist, Cisco CallManager System Guide
Updating a Media Resource Group
Perform the following procedure to update an existing Media Resource Group.
Note You cannot delete a media resource, such as a conference bridge, that is part of a Media Resource Group unless you first remove the resource from the Media Resource Group or you delete the Media Resource Group that contains the media resource.
Procedure
Step 1 Choose Service > Media Resource Group.
The Media Resource Group Configuration window displays. The Media Resource Group: New title displays with a Status: Ready indicator.
Step 2 From the Media Resource Groups list, choose an existing Media Resource Group.
The Media Resource Group title displays the name of the chosen Media Resource Group. The fields below display the previously defined values for this Media Resource Group.
Step 3 Update the desired settings as described in Table 28-1. At any point, click the Cancel Changes button to clear all new input and revert to the previous settings if necessary.
Note Restarting devices resets all devices associated with this Media Resource Group. Cisco CallManager may drop active calls on affected gateways.
Step 4 Click Update.
The Status changes from Ready to Update completed. The Media Resource Groups list shows the updated Media Resource Group as highlighted.
Step 5 To restart all devices in a Media Resource Group (both available and selected resources), click the Restart Devices button.
Related Topics
•Adding a Media Resource Group
•Copying a Media Resource Group
•Deleting a Media Resource Group
•Media Resource Group Configuration Settings
•Understanding Media Resources, Cisco CallManager System Guide
•Media Resource Group and Media Resource Group List Configuration Checklist, Cisco CallManager System Guide
Copying a Media Resource Group
Perform the following procedure to copy an existing Media Resource Group.
Procedure
Step 1 Choose Service > Media Resource Group.
The Media Resource Group Configuration window displays. The Media Resource Group: New title displays with a Status: Ready indicator.
Step 2 From the Media Resource Groups list, choose an existing Media Resource Group.
The Media Resource Group title displays the name of the chosen Media Resource Group. The fields below the Media Resource Group title display the previously defined values for this Media Resource Group.
Step 3 Click the Copy button.
Step 4 Update the desired settings as described in Table 28-1. At any point, click the Cancel Changes button to clear all new input and revert to the previous settings if necessary.To restart all devices in a Media Resource Group (both available and selected resources), click the Restart Devices button.
Note You must change at least the Media Resource Group Name.
Note Restarting devices resets all devices associated with this Media Resource Group. Cisco CallManager may drop active calls on affected gateways.
Step 5 Click Insert.
The Status changes from Ready to Insert completed. The Media Resource Groups list shows the new Media Resource Group as highlighted.
Related Topics
•Adding a Media Resource Group
•Updating a Media Resource Group
•Deleting a Media Resource Group
•Media Resource Group Configuration Settings
•Understanding Media Resources, Cisco CallManager System Guide
•Media Resource Group and Media Resource Group List Configuration Checklist, Cisco CallManager System Guide
Deleting a Media Resource Group
Perform the following procedure to delete an existing Media Resource Group.
Note You cannot delete a Media Resource Group that is assigned to a Media Resource Group List unless you first remove the Media Resource Group from the Media Resource Group List(s) to which it is assigned.
Procedure
Step 1 Choose Service > Media Resource Group.
The Media Resource Group Configuration window displays. The Media Resource Group: New title displays with a Status: Ready indicator.
Step 2 From the Media Resource Groups list, choose an existing Media Resource Group.
The Media Resource Group title displays the name of the chosen Media Resource Group. The fields below the Media Resource Group title display the previously defined values for this Media Resource Group.
Step 3 Click the Delete button.
A popup window displays the following warning:
You are about to permanently delete this Media Resource Group. This action cannot be undone.
Continue?
Step 4 Click OK.
The chosen Media Resource Group no longer appears on the Media Resource Groups list. The Status changes from Ready to Delete completed.
Related Topics
•Adding a Media Resource Group
•Copying a Media Resource Group
•Updating a Media Resource Group
•Media Resource Group Configuration Settings
•Understanding Media Resources, Cisco CallManager System Guide
•Media Resource Group and Media Resource Group List Configuration Checklist, Cisco CallManager System Guide
Media Resource Group Configuration Settings
Table 28-1 describes the configuration settings used for configuring Media Resource Groups.
Table 28-1 Media Resource Group Configuration Settings
Field
|
Description
|
Media Resource Group Name
|
Enter a unique name in this required field for the Cisco CallManager to identify the Media Resource Group. This name can comprise up to 50 characters. Valid characters include letters, numbers, spaces, dashes, dots (periods), and underscores.
|
Description
|
Enter a description for the Media Resource Group. This description can comprise up to 50 characters. Ensure Description does not contain double quotes ("), less than (<), greater than (>), or the percent sign (%).
|
Devices for this Group
|
This area comprises two panes that are used to define the media resources for a Media Resource Group: Available Media Resources and Selected Media Resources.
|
Available Media Resources
|
This pane lists the media resources that can be chosen for a Media Resource Group. The list includes the following media resource types:
•Conference Bridges (CFB)
•Media Termination Points (MTP)
•Music On Hold Servers (MOH)
•Transcoders (XCODE)
Music On Hold servers configured for multicast are labeled as (MOH)[Multicast].
To add a media resource for this Media Resource Group, choose one from the list and click the down arrow. After a media resource is added, its name moves to the Selected Media Resources pane.
|
Selected Media Resources
|
This pane lists the media resources that were chosen for a Media Resource Group. For any Media Resource Group, you must choose at least one media resource.
To delete (unselect) a media resource, choose its name in the list and click the up arrow.
|
Use Multicast for MOH Audio
|
To use multicast for Music On Hold Audio, check this check box. To do so, make sure at least one of the Selected Media Resources is a multicast MOH server.
Note The system administrator is responsible for configuring or creating multicast audio sources.
|
Related Topics
•Adding a Media Resource Group
•Updating a Media Resource Group
•Copying a Media Resource Group
•Deleting a Media Resource Group
•"Media Resource Group List Configuration"
•Understanding Media Resources, Cisco CallManager System Guide
•Media Resource Group and Media Resource Group List Configuration Checklist, Cisco CallManager System Guide