Table Of Contents

Region Configuration

Finding a Region

Adding a Region

Updating a Region

Deleting a Region

Region Configuration Settings

Region Configuration

---

Use regions to specify the voice codec that is used for calls within a region and between existing regions. The voice codec determines the type of compression and the maximum amount of bandwidth that is used per call.

---

Note The default voice codec for all calls through Cisco CallManager is G.711. If you do not plan to use any other voice codec, you do not need to use regions.

---

Use the following procedures to add, update, or delete regions:

•Finding a Region

•Adding a Region

•Updating a Region

•Deleting a Region

•Region Configuration Settings

Refer to the "Regions" section in the Cisco CallManager System Guide for more information about configuring regions and selecting voice codecs.

Finding a Region

Because you might have several regions in your network, Cisco CallManager Administration lets you locate specific regions on the basis of specific criteria. Use the following procedure to locate regions.

---

Note During your work in a browser session, Cisco CallManager Administration retains your region search preferences. If you navigate to other menu items and return to this menu item, Cisco CallManager Administration retains your region search preferences until you modify your search or close the browser.

---

Procedure

---

Step 1 Choose System > Region.

The Find and List Regions window displays. Use the drop-down list box to search for a region.

Step 2 From the Find Regions where drop-down list box, choose one of the following criteria:

•begins with

•contains

•ends with

•is exactly

Step 3 Specify the appropriate search text, if applicable, and click Find. You can also specify how many items per page to display.

---

Tip To find all regions that are registered in the database, click Find without entering any search text.

---

A list of discovered regions displays by

•Region icon

•Region Name

---

Note You can delete multiple regions from the Find and List Regions window by checking the check boxes next to the appropriate regions and clicking Delete Selected. You can delete all regions in the window by checking the check box in the Matching records title bar and clicking Delete Selected.

---

Step 4 From the list of records, click the region icon or name that matches your search criteria.

The window displays the region that you choose.

---

Related Topics

•Finding a Region

•Adding a Region

•Updating a Region

•Deleting a Region

•Region Configuration Settings

Adding a Region

This section describes how to add a new region to the Cisco CallManager database.

---

Note Addition of regions occurs in a matrixlike fashion. If you add regions A, B, and C, a matrix with region A, region B, and region C as both columns and rows results, as shown in this matrix:

---

	Region A	Region B	Region C
Region A
Region B
Region C

If you assign 20 regions, the database adds 400 entries (20 x 20). Some performance limitations exist when large numbers of regions are assigned.

Procedure

---

Step 1 Choose System > Region.

Step 2 In the upper, right corner of the window, click the Add a New Region link.

The Region Configuration window displays.

Step 3 In the Region Name field, enter the name that you want to assign to the new region and click Insert.

Step 4 Using the drop-down list boxes, choose the voice codec to use for calls within the new region and between the new region and existing regions. The voice codec determines the type of compression and the maximum amount of bandwidth that is allocated for these calls.

See Table 7-1 for a summary of the available codec types and bandwidth usage.

Step 5 Click Update to save the new region in the database.

---

Next Step

After adding a new region to the database, you can use it to configure device pools. Devices acquire a region setting from the device pool to which they are assigned. See the "Adding a Device Pool" section for information on configuring device pools.

Related Topics

•Finding a Region

•Updating a Region

•Deleting a Region

•Region Configuration Settings

•Adding a Device Pool

Updating a Region

This section describes how to update the configuration for a region.

Procedure

---

Step 1 Find the region by using the procedure in the "Finding a Region" section.

Step 2 From the list of matching records, choose the region that you want to update.

Update the codec settings for calls within the region and between other regions. See Table 7-1 for a summary of the available codec types and bandwidth usage.

Step 3 Click Update to save the changes in the database.

Step 4 Click Restart Devices to apply the changes to all devices that use the updated region.

---

Related Topics

•Finding a Region

•Adding a Region

•Deleting a Region

•Region Configuration Settings

Deleting a Region

This section describes how to delete a region from the Cisco CallManager database.

Before You Begin

You cannot delete a region that any device pools are using. To find out which device pools are using the region, click the Dependency Records link from the Region Configuration window. For more information about dependency records, see the "Accessing Dependency Records" section on page A-1. If you try to delete a region that is in use, Cisco CallManager displays an error message. Before deleting a region that is currently in use, you must perform either or both of the following tasks:

•Update the device pools to use a different region. See the "Updating a Device Pool" section.

•Delete the device pools that are using the region that you want to delete. See the "Deleting a Device Pool" section.

Procedure

---

Step 1 Find the region by using the procedure in the "Finding a Region" section.

Step 2 From the list of matching records, choose the region that you want to delete.

Step 3 Click Delete.

---

Related Topics

•Finding a Region

•Adding a Region

•Updating a Region

•Region Configuration Settings

Region Configuration Settings

Table 7-1 summarizes the available voice codecs that can be specified for regions. The total bandwidth that is used per call stream depends on the voice codec type as well as factors such as data packet size and overhead (packet header size). The bandwidth figures shown in Table 7-1 apply for 30-ms data packets and include IP headers. Each call comprises two call streams.

Table 7-1 Region Configuration Settings 

Voice Codec	Bandwidth Used Per Call (Including IP Headers) With 30-ms Data Packets	Description
G.711	80 kbps	Default codec for all calls in Cisco CallManager.
G.723	24 kbps	Low-bit-rate codec supported for use with older Cisco IP Phone model 12 SP Series and Cisco IP Phone model 30 VIP.
G.729	24 kbps	Low bit-rate codec supported for Cisco IP Phone 7900 family models.
Wideband	272 kbps	High-quality, high-bandwidth voice codec for IP-phone to IP-phone calls supported by Cisco IP Phone 7900 family models.
GSM	29 kbps	Global System for Mobile Communications (GSM) codec that enables the MNET system for GSM wireless handsets to interoperate with Cisco CallManager.

Related Topics

•Finding a Region

•Adding a Region

•Updating a Region

•Deleting a Region