About Cisco ISR-WAAS
Cisco ISR-WAAS is the specific implementation of Cisco vWAAS running in a Cisco IOS-XE software container on a Cisco ISR-4400 Series router. Container in this context refers to a KVM hypervisor that runs virtualized applications on the Cisco ISR-4400 Series router.
The following table shows the default number of CPUs, memory capacity, disk storage and supported ISR platforms for each ISR model.
Cisco ISR-WAAS Model |
CPUs |
Memory |
Disk Storage |
Cisco ISR Platform Supported |
Earliest Cisco WAAS Version Supported |
---|---|---|---|---|---|
ISR-WAAS-200 |
1 |
3 GB |
151 GB |
ISR-4321 |
5.2.1 |
1 |
4 GB |
151 GB |
ISR-4321 |
6.2.3 |
|
ISR-WAAS-750 |
2 |
4 GB |
151 GB |
ISR-4351 ISR-4331 ISR-4431 ISR-4451 |
5.2.1 |
4 |
6 GB |
151 GB |
ISR-4461 |
6.4.1b |
|
ISR-WAAS-1300 |
4 |
6 GB |
151 GB |
ISR-4431 ISR-4451 |
5.2.1 |
4 |
6 GB |
151 GB |
ISR-4461 |
6.4.1b |
|
ISR-WAAS-2500 |
6 |
8 GB |
338 GB |
ISR-4451 |
5.2.1 |
6 |
8 GB |
338 GB |
ISR-4461 |
6.4.1b |
Note |
For Cisco vWAAS in Cisco WAAS Version 6.2.3x or later, Cisco ISR-4321 with profile ISR-WAAS-200, ISR-WAAS RAM can be increased from 3 GB to 4 GB. For this increase in ISR-WAAS RAM to be implemented, you must complete a new OVA deployment of Cisco WAAS version 6.2.3x or later; the increase in ISR-WAAS RAM is not automatically implemented with an upgrade to Cisco WAAS Version 6.2.3x or later. |