A Commands

aaa accounting dot1x default group

[no] aaa accounting dot1x default group <grp_name> +

Syntax Description

aaa

Configure aaa functions

accounting

Configure accounting methods

dot1x

accounting methods for dot1x

default

default aaa methods

grp_name

server group name

Command Mode

  • /exec/configure

aaa authentication dot1x default group

[no] aaa authentication dot1x default group <grp_name> +

Syntax Description

aaa

Configure aaa functions

authentication

Configure authentication methods

grp_name

server group name

Command Mode

  • /exec/configure

aaa authentication login ascii-authentication

[no] aaa authentication login ascii-authentication

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

ascii-authentication

enable ascii authentication

Command Mode

  • /exec/configure

aaa authentication login console

[no] aaa authentication login console { group <s0> [ { local1 | none | <s1> [ { local1 | none | <s2> [ { local1 | none | <s3> [ { local1 | none | <s4> [ { local1 | none | <s5> [ { local1 | none | <s6> [ { local1 | none | <s7> [ { local1 | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

console

Configure console methods

group

Specify server groups

s0

Server group name

none

(Optional) No authentication

s1

(Optional) Server group name

none

(Optional) No authentication

s2

(Optional) Server group name

none

(Optional) No authentication

s3

(Optional) Server group name

none

(Optional) No authentication

s4

(Optional) Server group name

none

(Optional) No authentication

s5

(Optional) Server group name

none

(Optional) No authentication

s6

(Optional) Server group name

none

(Optional) No authentication

s7

(Optional) Server group name

none

(Optional) No authentication

local

Use local username authentication

local1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

none

No authentication

Command Mode

  • /exec/configure

aaa authentication login default

[no] aaa authentication login default { group <s0> [ { local1 | none | <s1> [ { local1 | none | <s2> [ { local1 | none | <s3> [ { local1 | none | <s4> [ { local1 | none | <s5> [ { local1 | none | <s6> [ { local1 | none | <s7> [ { local1 | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

default

Configure default methods

group

Specify server group and maximum number of server groups supported is 8

s0

Server group name

none

(Optional) No authentication

s1

(Optional) Server group name

none

(Optional) No authentication

s2

(Optional) Server group name

none

(Optional) No authentication

s3

(Optional) Server group name

none

(Optional) No authentication

s4

(Optional) Server group name

none

(Optional) No authentication

s5

(Optional) Server group name

none

(Optional) No authentication

s6

(Optional) Server group name

none

(Optional) No authentication

s7

(Optional) Server group name

none

(Optional) No authentication

local

Use local username authentication

local1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

none

No authentication

Command Mode

  • /exec/configure

aaa authentication login default fallback error local

[no] aaa authentication login { default | console } fallback error local

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

default

Configure default methods

console

Configure console methods

fallback

Configure fallback behavior

error

Fallback in case all AAA servers configured for remote authentication are unreachable (Authentication error)

local

Fallback to local authentication

Command Mode

  • /exec/configure

aaa authentication login enable

[no] aaa authentication login { mschap | mschapv2 | chap } enable

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

mschap

MSCHAP authentication for login

mschapv2

MSCHAP V2 authentication for login

chap

CHAP authentication for login

enable

enable the authentication for login

Command Mode

  • /exec/configure

aaa authentication login error-enable

[no] aaa authentication login error-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

error-enable

enable display of error message on login failures

Command Mode

  • /exec/configure

aaa authentication login invalid-username-log

[no] aaa authentication login invalid-username-log

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

login

Configure methods for login

invalid-username-log

enable invalid username log

Command Mode

  • /exec/configure

aaa authentication rejected

[no] aaa authentication rejected

Syntax Description

no

Negate a command or set its defaults

aaa

Configure aaa functions

authentication

Configure authentication methods

rejected

Set max number of fail attempts

Command Mode

  • /exec/configure

aaa authentication rejected in ban

aaa authentication rejected <i1> in <i2> ban <i3>

Syntax Description

aaa

Configure aaa functions

authentication

Configure authentication methods

rejected

Set max number of fail attempts

i1

Fail attempts max value

in

Watch period for fail attempts

i2

Time period in seconds

ban

Block time period

i3

Time period in seconds

Command Mode

  • /exec/configure

aaa authorization commands console

[no] aaa authorization { commands | config-commands } console { group <s0> [ { local | none | <s1> [ { local | none | <s2> [ { local | none | <s3> [ { local | none | <s4> [ { local | none | <s5> [ { local | none | <s6> [ { local | none | <s7> [ { local | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authorization

Configure authorization methods

commands

Authorization for all exec-mode commands

config-commands

Authorization for config commands

console

Configure methods console

group

Specify server groups

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

local

(Optional) Use local RBACL based authorization

none

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure

aaa authorization commands default

[no] aaa authorization { commands | config-commands } default { group <s0> [ { local | none | <s1> [ { local | none | <s2> [ { local | none | <s3> [ { local | none | <s4> [ { local | none | <s5> [ { local | none | <s6> [ { local | none | <s7> [ { local | none } ] } ] } ] } ] } ] } ] } ] } ] | local | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authorization

Configure authorization methods

commands

Authorization for all exec-mode commands

config-commands

Authorization for config commands

default

Configure default methods

group

Specify server groups

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

local

(Optional) Use local RBACL based authorization

none

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure

aaa authorization ssh default group

[no] aaa authorization { ssh-publickey | ssh-certificate } default { group <s0> [ { local1 | <s1> [ { local1 | <s2> [ { local1 | <s3> [ { local1 | <s4> [ { local1 | <s5> [ { local1 | <s6> [ { local1 | <s7> [ { local1 } ] } ] } ] } ] } ] } ] } ] } ] | local }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

authorization

Configure authorization methods

ssh-publickey

Configure ssh publickey

ssh-certificate

Configure ssh certificate

default

Configure default ssh methods

group

Specify server groups

s0

Server group name

s1

(Optional) Server group name

s2

(Optional) Server group name

s3

(Optional) Server group name

s4

(Optional) Server group name

s5

(Optional) Server group name

s6

(Optional) Server group name

s7

(Optional) Server group name

local

Use local username authentication

local1

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure

aaa bypass-user

[no] aaa bypass-user <s0> { [ accounting ] [ authorization ] | [ authorization ] [ accounting ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

bypass-user

Configure bypass user

s0

Enter the username

accounting

(Optional) Bypass accounting

authorization

(Optional) Bypass authorization

Command Mode

  • /exec/configure

aaa group server ldap

[no] aaa group server ldap <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

group

Configure aaa server group

server

Configure aaa server group

ldap

LDAP server group name

s0

LDAP server group name

Command Mode

  • /exec/configure

aaa group server radius

[no] aaa group server radius <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

group

Configure aaa server group

server

Configure aaa server group

radius

RADIUS server group name

s0

RADIUS server group name

Command Mode

  • /exec/configure

aaa group server tacacs

[no] aaa group server tacacs <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

group

Configure aaa server group

server

Configure aaa server group

tacacs

TACACS+ server group name

s0

TACACS+ server group name

Command Mode

  • /exec/configure

aaa server radius dynamic-author

[no] aaa server radius dynamic-author

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

server

Local AAA server

radius

Profile for local radius server

dynamic-author

Local server profile for RFC 5176 support

Command Mode

  • /exec/configure

aaa user default-role

[no] aaa user default-role

Syntax Description

no

(Optional) Negate a command or set its defaults

aaa

Configure aaa functions

user

Remotely authenticated user

default-role

Default role assigned by aaa-admin for remote authentication

Command Mode

  • /exec/configure

abort

abort

Syntax Description

abort

Exit region configuration mode, aborting changes

Command Mode

  • /exec/configure/spanning-tree/mst/configuration

abort

abort [ session ]

Syntax Description

abort

Abort the current configuration session

session

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure

abort

abort

Syntax Description

abort

abort epbr session

Command Mode

  • /exec/configure/epbr-sess

abort

abort

Syntax Description

abort

Abort the current configuration session

Command Mode

  • /exec/configure

abort

abort

Syntax Description

abort

abort itd session

Command Mode

  • /exec/configure/itd-session-device-group

absolute-timeout

{ absolute-timeout <i0> | no absolute-timeout [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

absolute-timeout

Configure absolute timeout

i0

Enter timeout in minutes, 0 to disable

Command Mode

  • /exec/configure/line

absolute-timer

{ [ no ] absolute-timer <time> | no absolute-timer }

Syntax Description

absolute-timer

Define a De-Dup absolute timer

time

Time in minutes

Command Mode

  • /exec/configure/de-duplication

absolute start

{ [ <seqno> ] | no } absolute { start <stime> <sday> <smonth> <syear> [ end <etime> <eday> <emonth> <eyear> ] | end <etime> <eday> <emonth> <eyear> }

Syntax Description

seqno

(Optional) Sequence number

no

Negate a command or set its defaults

absolute

Absolute time and date

start

Starting time and date

stime

Starting time

sday

Day of the month

smonth

Month

syear

Year

end

(Optional) Ending time and date

etime

(Optional) Ending time

eday

(Optional) Day of the month

emonth

(Optional) Month

eyear

(Optional) Year

Command Mode

  • /exec/configure/timerange

accept-lifetime smonth_a smonth_b smonth_c smonth_d smonth_e smonth_f smonth_g smonth_h smonth_i smonth_j smonth_k smonth_l duration infinite emonth_a emonth_b emonth_c emonth_d emonth_e emonth_f emonth_g emonth_h emonth_i emonth_j emonth_k emonth_l

{ { accept-lifetime [ local ] <stime> { smonth_a | smonth_b | smonth_c | smonth_d | smonth_e | smonth_f | smonth_g | smonth_h | smonth_i | smonth_j | smonth_k | smonth_l } <sday> <syear> { duration <dsec> | infinite | <etime> { emonth_a | emonth_b | emonth_c | emonth_d | emonth_e | emonth_f | emonth_g | emonth_h | emonth_i | emonth_j | emonth_k | emonth_l } <eday> <eyear> } } | { no accept-lifetime [ [ local ] <stime> { smonth_a | smonth_b | smonth_c | smonth_d | smonth_e | smonth_f | smonth_g | smonth_h | smonth_i | smonth_j | smonth_k | smonth_l } <sday> <syear> { duration <dsec> | infinite | <etime> { emonth_a | emonth_b | emonth_c | emonth_d | emonth_e | emonth_f | emonth_g | emonth_h | emonth_i | emonth_j | emonth_k | emonth_l } <eday> <eyear> } ] } }

Syntax Description

no

Negate a command or set its defaults

accept-lifetime

Set accept lifetime of key

local

(Optional) Specify time in local timezone

stime

HH:MM:SS Time to start <0-23>:<0-59>:<0-59>

etime

HH:MM:SS Time to end <0-23>:<0-59>:<0-59>

smonth_a

smonth_b

smonth_c

smonth_d

smonth_e

smonth_f

smonth_g

smonth_h

smonth_i

smonth_j

smonth_k

smonth_l

emonth_a

emonth_b

emonth_c

emonth_d

emonth_e

emonth_f

emonth_g

emonth_h

emonth_i

emonth_j

emonth_k

emonth_l

sday

Day of the month to start

eday

Day of the month to end

syear

Year to start

eyear

Year to start

duration

Set key lifetime duration

dsec

Duration in seconds

infinite

Never Expires

Command Mode

  • /exec/configure/keychain-key

access-class

[no] access-class <acl-ip-ipv6-name> <inout>

Syntax Description

no

(Optional) Negate a command or set its defaults

access-class

Specify IPv4 access control for packets

acl-ip-ipv6-name

List name

inout

Traffic direction

Command Mode

  • /exec/configure/line

access-list

[no] access-list <acl-name> [ device-group <dgrp_name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

access-list

ITD access-list name

device-group

(Optional) device-group

acl-name

ITD user ACL name

dgrp_name

(Optional) access-list device-group name

Command Mode

  • /exec/configure/itd

access-list ipv6

[no] access-list ipv6 <acl-name> [ device-group <dgrp_name> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

access-list

ITD access-list name

ipv6

ipv6 access-list

device-group

(Optional) device-group

acl-name

ITD user ACL name

dgrp_name

(Optional) access-list ipv6 device-group name

Command Mode

  • /exec/configure/itd

action

[no] { { { action <route-action> } | { reverse-action <rev-route-action> } } + }

Syntax Description

no

(Optional) Negate a command or set its defaults

action

route action for forward traffic

route-action

route action options

reverse-action

route action for reverse traffic

rev-route-action

route action options

Command Mode

  • /exec/configure/config-epbr-svc-chain/seq

action

[no] action <label>

Syntax Description

no

Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

Command Mode

  • /exec/configure/event-manager-applet

action

[no] action { drop [ log ] | forward | redirect <intf> }

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Specify the action clause

drop

Drop matched packets

log

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

forward

Forward matched packets

redirect

Redirect matched packets to the specified interface(s)

intf

Interface traffic is redirected to

Command Mode

  • /exec/configure/vacl

action cli

action <label> cli [ local ] <vsh_cmd>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

cli

Configure a VSH CLI action

local

(Optional) Execute the action in the same card on which the event happens

vsh_cmd

Enter the vsh command

Command Mode

  • /exec/configure/event-manager-applet

action collect

action <label> collect { { <yaml_file> [ max-triggers <m_value> | rate-limit <value> | purge-time <p_value> ] + <component> } | disable }

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

collect

Collect debugging info using a yaml file

yaml_file

Enter the YAML input file or folder inside which yaml files are present. The path/name has to be relative to bootflash:scripts

max-triggers

(Optional) Limit number of triggers

m_value

(Optional) Enter the value in integer

rate-limit

(Optional) Limit trigger based collection for a period of time

value

(Optional) Enter value in seconds

purge-time

(Optional) Change the time period for which older files are purged

p_value

(Optional) Enter purge time value in minutes

component

Enter the component for tech-support collection

disable

Disable the trigger based collection

Command Mode

  • /exec/configure/event-manager-applet

action counter name value op

action <label> counter name <counter-name> value <counter-value> op <op-val>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

counter

Specify the name of the counter

name

Specify the name of the counter

counter-name

Name of the counter

value

Specify the value to be applied to the counter

counter-value

Enter an integer value or a $ prefixed name (parameter substitution)

op

Specify the operator to be applied

op-val

Enter the value of the operator

Command Mode

  • /exec/configure/event-manager-applet

action eem test

action <label> eem test <param>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

eem

Event Manager command

test

Do test action

param

Test action parameter (dummy value)

Command Mode

  • /exec/configure/event-manager-applet

action event-default

action <label> event-default

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

event-default

Do default action for the event

Command Mode

  • /exec/configure/event-manager-applet

action forceshut reset-reason

[no] action <label2> forceshut [ { module { <module> | <mod-str> } | <s0> { <santa-cruz-range> | <santa-cruz-string> } } ] reset-reason <reset_reason_string>

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label2

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

forceshut

Force the entire switch to shut down

module

(Optional) Optional. Module to be forced to shut down(optional argument)

module

(Optional) please enter the module number

mod-str

(Optional) Enter the module number (integer value) or a $ prefixed parameter name

s0

(Optional) Optional. Xbar to be forced to shut down(optional argument)

santa-cruz-range

(Optional) please enter the xbar number

santa-cruz-string

(Optional) Enter the xbar number (integer value) or a $ prefixed parameter name

reset-reason

Shut down (with reset-reason)

reset_reason_string

please enter reset_reason_string in quotes

Command Mode

  • /exec/configure/event-manager-applet

action overbudgetshut

[no] action <label> overbudgetshut [ module { <module> | <mod-str> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

overbudgetshut

Shut down the specified LCs due to power over budget

module

(Optional) Optional. Module to be force-shut(optional arg)

module

(Optional) please enter the module number

mod-str

(Optional) Enter the module number (integer value) or a $ prefixed parameter name

Command Mode

  • /exec/configure/event-manager-applet

action policy-default

action <label> policy-default

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

policy-default

Do default action(s) of the policy being overridden

Command Mode

  • /exec/configure/event-manager-applet

action reload force

[no] action <label> reload [ module { <module> | <mod-str> } ] force

Syntax Description

no

(Optional) Negate a command or set its defaults

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

reload

Reload the system or a specific module

module

(Optional) Reload a specific module

force

reload without prompting

module

(Optional) please enter the module number

mod-str

(Optional) Enter the module number (integer value) or a $ prefixed parameter name

Command Mode

  • /exec/configure/event-manager-applet

action snmp-trap

action <label> snmp-trap [ intdata1 <integer-data1> ] [ intdata2 <integer-data2> ] [ strdata <string-data> ]

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

snmp-trap

Send

intdata1

(Optional) Enter

integer-data1

(Optional) Integer

intdata2

(Optional) Enter

integer-data2

(Optional) Integer

strdata

(Optional) Enter

string-data

(Optional) String

Command Mode

  • /exec/configure/event-manager-applet

action syslog msg

action <label> syslog [ priority { <prio> | <prio-str> } ] msg <msg-text>

Syntax Description

action

Configure the actions to be executed

label

Enter the label <num1>[.<num2>] for action order num2 must be 0-9

syslog

Generate a syslog message

priority

(Optional) Priority of the syslog message

prio

(Optional) Enter the priority

prio-str

(Optional) Enter a valid $ prefixed name, for parameter substitution

msg

Enter the message for the syslog

msg-text

The message text

Command Mode

  • /exec/configure/event-manager-applet

activate mode-100M

[no] activate mode-100M

Syntax Description

no

(Optional) Negate a command or set its defaults

activate

Activate new mode

mode-100M

Activate mode-100M

Command Mode

  • /exec/configure

active-query timer

{ active-query timer <interval> | no active-query timer }

Syntax Description

no

Negate a command or set its defaults

active-query

mDNS Active Query on vlan

timer

Active Query Timer value

interval

Active Query Timer value in seconds

Command Mode

  • /exec/configure/vlan-config/mdns-sd

additional-paths install backup

[no] additional-paths install backup

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

install

Install backup path

backup

Install backup path

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

additional-paths receive

[no] additional-paths receive

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

receive

Additional paths Receive capability

Command Mode

  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

additional-paths selection route-map

[no] additional-paths selection route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

selection

Additional paths selection

route-map

Route-map for additional paths selection

rmap-name

Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

additional-paths send

[no] additional-paths send

Syntax Description

no

(Optional) Negate a command or set its defaults

additional-paths

Additional paths configuration

send

Additional paths Send capability

Command Mode

  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-ipv4-label /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

address-family ipv4

[no] address-family ipv4

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

Command Mode

  • /exec/configure/config-sr-mpls/config-sr-mpls-conn-pfxsid

address-family ipv4 labeled-unicast

[no] address-family ipv4 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp

address-family ipv4 labeled-unicast

{ [ no | default ] } address-family ipv4 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mdt

[no] address-family ipv4 mdt

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mdt

Configure Multicast Distribution Tree

Command Mode

  • /exec/configure/router-bgp

address-family ipv4 mdt

{ [ no | default ] } address-family ipv4 mdt

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mdt

Configure Multicast Distribution Tree

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mvpn

{ [ no | default ] } address-family ipv4 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mvpn

Configure Multicast VPN

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mvpn

[no] address-family ipv4 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mvpn

Configure Multicast VPN

Command Mode

  • /exec/configure/router-bgp

address-family ipv4 unicast

[no] { address-family ipv4 unicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure Address Family and its parameters

ipv4

Configure IPv4 Address Family parameters

unicast

Unicast

Command Mode

  • /exec/configure/mpls_static

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-rip

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-rip/router-rip-vrf

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv4 unicast

[no] address-family ipv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure address family

ipv4

Configure IPv4 address family

unicast

Configure Unicast address family

Command Mode

  • /exec/configure/vrf

address-family ipv4 unicast

[no] address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

  • /exec/configure/router-bgp

address-family ipv4 unicast

[no] address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf

address-family ipv4 unicast

{ [ no | default ] } address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 unicast

[ no | default ] address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family ipv6 labeled-unicast

{ [ no | default ] } address-family ipv6 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 labeled-unicast

[no] address-family ipv6 labeled-unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

labeled-unicast

Configure labeled unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp

address-family ipv6 mvpn

[no] address-family ipv6 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

mvpn

Configure Multicast VPN

Command Mode

  • /exec/configure/router-bgp

address-family ipv6 mvpn

{ [ no | default ] } address-family ipv6 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

mvpn

Configure Multicast VPN

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-rip

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-rip/router-rip-vrf

address-family ipv6 unicast

[no] { address-family ipv6 unicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure Address Family and its parameters

ipv6

Configure IPv6 Address Family parameters

unicast

Unicast

Command Mode

  • /exec/configure/mpls_static

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure IPv6 unicast address-family

Command Mode

  • /exec/configure/router-ospf3

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure IPv6 unicast address-family

Command Mode

  • /exec/configure/router-ospf3/vrf

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv6 unicast

[no] address-family ipv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure address family

ipv6

Configure IPv6 address family

unicast

Configure Unicast address family

Command Mode

  • /exec/configure/vrf

address-family ipv6 unicast

[no] address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

  • /exec/configure/router-bgp

address-family ipv6 unicast

[no] address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

multicast

Configure multicast address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf

address-family ipv6 unicast

{ [ no | default ] } address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 unicast

[ no | default ] address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family l2vpn evpn

[no] address-family l2vpn evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

evpn

Configure L2VPN EVPN address-family

Command Mode

  • /exec/configure/router-bgp

address-family l2vpn evpn

{ [ no | default ] } address-family l2vpn evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

evpn

Configure L2VPN EVPN address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family l2vpn vpls

{ [ no | default ] } address-family l2vpn vpls

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

vpls

Configure L2VPN VPLS address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family l2vpn vpls

[no] address-family l2vpn vpls

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

l2vpn

Configure L2VPN address-family

vpls

Configure L2VPN VPLS address-family

Command Mode

  • /exec/configure/router-bgp

address-family link-state

[no] address-family link-state

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

link-state

Configure link-state address-family

Command Mode

  • /exec/configure/router-bgp

address-family link-state

{ [ no | default ] } address-family link-state

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

link-state

Configure link-state address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv4 unicast

{ [ no | default ] } address-family vpnv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

vpnv4

Configure IPv4 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv4 unicast

[no] address-family vpnv4 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

vpnv4

Configure IPv4 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp

address-family vpnv6 unicast

{ [ no | default ] } address-family vpnv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

vpnv6

Configure IPv6 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv6 unicast

[no] address-family vpnv6 unicast

Syntax Description

no

(Optional) Negate a command or set its defaults

address-family

Configure an address-family

vpnv6

Configure IPv6 VPN address-family

unicast

Configure Unicast sub-address-family

Command Mode

  • /exec/configure/router-bgp

address

[no] address <ip_addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address configuration

ip_addr

IP Address

Command Mode

  • /exec/configure/if-eth-any/vrrs

address

address { <ctlr-ip> } | no address [ <ctlr-ip> ]

Syntax Description

no

Negate a command or set its defaults

address

Controller Address

ctlr-ip

Controller IPv4 address

Command Mode

  • /exec/configure/service-export

address

[no] address <start-ip> <end-ip>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

Address range for the pool

start-ip

Start IP address

end-ip

End IP address

Command Mode

  • /exec/configure/ipnat-pool

address

{ address <ip_address> | no address [ <ip_address> ] }

Syntax Description

no

Negate a command or set its defaults

address

Add an IP address to the vr

ip_address

ip address

Command Mode

  • /exec/configure/if-eth-any/vrrp

address

[no] address <ip_addr> [ primary ]

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

primary

(Optional) Primary Address

ip_addr

IPv4 Address

Command Mode

  • /exec/configure/if-eth-any/vrrpv3_ipv4

address

[no] address <ipv6_addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

Command Mode

  • /exec/configure/if-eth-any/vrrpv3_ipv6

address

[no] address <ipv6_addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address configuration

Command Mode

  • /exec/configure/if-eth-any/vrrs

address port-number

address { <ipv4-addr> | <ipv6-addr> } port-number <port-number> | no address

Syntax Description

no

Negate a command or set its defaults

address

Configure IPv4 or IPv6 address

ipv4-addr

IPv4 address of the BMP server

port-number

Configure the port for the BMP server

port-number

Port number value

Command Mode

  • /exec/configure/router-bgp/router-bgp-bmp-server

address primary

[no] address <ipv6_addr> primary

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

primary

Primary Address

Command Mode

  • /exec/configure/if-eth-any/vrrpv3_ipv6

address secondary

[no] address <ip_addr> secondary

Syntax Description

no

(Optional) Negate a command or set its defaults

address

IP Address

secondary

Secondary Address

ip_addr

IPv4 Address

Command Mode

  • /exec/configure/if-eth-any/vrrpv3_ipv4

address secondary

{ address <ip_address> secondary | no address <ip_address> secondary }

Syntax Description

no

Negate a command or set its defaults

address

Add an IP address to the vr

ip_address

ip address

secondary

a virtual IP address without owner

Command Mode

  • /exec/configure/if-eth-any/vrrp

adjacency-check

[no] adjacency-check

Syntax Description

no

(Optional) Negate a command or set its defaults

adjacency-check

Adjacency's protocol support consistency check

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise-gateway

[no] advertise-gateway

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-gateway

Advertise Gateway Mode

Command Mode

  • /exec/configure/if-vlan/hybrid

advertise-gw-ip

[ no | default ] advertise-gw-ip

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

advertise-gw-ip

Advertise Gateway IP in Type-5 routes to neighbor

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

advertise-labels

[no] advertise-labels [ vrf { <vrf-name> | <vrf-known-name> } ] [ [ for <pfx-list> [ to <peer-pfx-list> ] ] | [ interface <intf> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-labels

Label advertisements

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

for

(Optional) Prefix list specifying controls on destination prefixes

pfx-list

(Optional) Name of prefix list

to

(Optional) Prefix list specifying controls on LDP peers

peer-pfx-list

(Optional) Name of prefix list

interface

(Optional) Advertise /32 interface address

intf

(Optional)

Command Mode

  • /exec/configure/ldp

advertise-map exist default advertise-map

{ [ no ] advertise-map <advt-rmap-name> { exist-map | non-exist-map } <cond-rmap-name> } | default advertise-map

Syntax Description

no

(Optional) Negate a command or set its defaults

default

Inherit values from a peer template

advertise-map

Specify route-map for conditional advertisement

exist-map

Condition route-map to advertise only when prefix in condition exists

non-exist-map

Condition route-map to advertise only when prefix in condition does not exist

advt-rmap-name

Route-map name

cond-rmap-name

Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

advertise-pip

[no] advertise-pip

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-pip

advertise physical ip for type-5 route

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

advertise-system-mac

[no] advertise-system-mac

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise-system-mac

Advertise extra EVPN RT-2 with system MAC

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

advertise evpn multicast

[no] advertise evpn multicast

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise

Advertise L2 multicast capability

evpn

evpn

multicast

L2 multicast

Command Mode

  • /exec/configure

advertise interface

[no] advertise interface <interface> [ <level> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise

Advertise interface IP

interface

Advertise interface IP

interface

Interface to advertise

level

(Optional) IS-IS level

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise local-labeled-route

[ no | default ] advertise local-labeled-route

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

advertise

Advertise to peer

local-labeled-route

Advertise a route with local label to peer

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af

advertise passive-only level-1

[no] advertise passive-only level-1

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise

Control what we advertise in our LSP

passive-only

Advertise prefixes of passive interfaces only

level-1

Advertise prefixes of passive interfaces only on level-1

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise passive-only level-2

[no] advertise passive-only level-2

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise

Control what we advertise in our LSP

passive-only

Advertise prefixes of passive interfaces only

level-2

Advertise prefixes of passive interfaces only on level-2

Command Mode

  • /exec/configure/router-isis/router-isis-af-ipv4 /exec/configure/router-isis/router-isis-af-ipv6

advertise virtual-rmac

[no] advertise virtual-rmac

Syntax Description

no

(Optional) Negate a command or set its defaults

advertise

Reachability advertisement

virtual-rmac

Advertise virtual RMAC capability

Command Mode

  • /exec/configure/if-nve

advertisement-interval

advertisement-interval <adv-sec> | { no | default } advertisement-interval [ <adv-sec> ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

advertisement-interval

Minimum interval between sending BGP routing updates

adv-sec

Time in seconds

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

advertisement-interval

{ advertisement-interval <interval_time> | no advertisement-interval [ <interval_time> ] }

Syntax Description

no

Negate a command or set its defaults

advertisement-interval

Set the time interval between advertisement

interval_time

Time interval (in seconds) between advertisements

Command Mode

  • /exec/configure/if-eth-any/vrrp

afd queue-desired

[no] afd queue-desired <q-desired> { bytes | kbytes | mbytes } [ ecn ]

Syntax Description

no

(Optional) Negate a command or set its defaults

afd

Configure AFD parameters

queue-desired

Specify Queue Desired for AFD

bytes

Bytes

kbytes

Kilo bytes

mbytes

Mega bytes

ecn

(Optional) ECN

Command Mode

  • /exec/configure/policy-map/type/queuing/class

affinity-group

{ affinity-group <affinity_group_id> } | { { no | default } affinity-group [ <affinity_group_id> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

affinity-group

Configure an affinity group

affinity_group_id

Affinity Group ID

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

affinity-group activate

affinity-group activate <affinity_group_id> | no affinity-group activate [ <affinity_group_id> ]

Syntax Description

no

Negate a command or set its defaults

affinity-group

Configure an affinity group

activate

Activate the affinity group

affinity_group_id

AFFINITY Group ID

Command Mode

  • /exec/configure/router-bgp

affinity-map

[no] affinity-map

Syntax Description

no

(Optional) Negate a command or set its defaults

affinity-map

Configure Affinity map

Command Mode

  • /exec/configure/sr/te

affinity

[no] affinity

Syntax Description

no

(Optional) Negate a command or set its defaults

affinity

Configure Affinity Constraints

Command Mode

  • /exec/configure/sr/te/color/cndpaths/pref/constraint

affinity

[no] affinity

Syntax Description

no

(Optional) Negate a command or set its defaults

affinity

Configure Affinity Constraints

Command Mode

  • /exec/configure/sr/te/pol/cndpaths/pref/constraint

affinity

[no] affinity

Syntax Description

no

(Optional) Negate a command or set its defaults

affinity

Specify the interface affinities

Command Mode

  • /exec/configure/sr/te/if

age

{ [ no ] age <age> | no age }

Syntax Description

age

Provide the age value for this INT flow-profile

age

flow-profile age (seconds). Default is 30.

Command Mode

  • /exec/configure/config-int-flow-prof

age

{ [ no ] age <age> | no age }

Syntax Description

age

Provide the age value for this POSTCARD flow-profile

age

flow-profile age (seconds). Default is 30.

Command Mode

  • /exec/configure/config-postcard-flow-prof

aggregate-address

[no] aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } [ as-set | summary-only | suppress-map <suppress-rmap> | advertise-map <advertise-rmap> | attribute-map <attribute-rmap> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

aggregate-address

Configure BGP aggregate prefixes

ip-addr

Aggregate address

ip-mask

Aggregate mask

ip-prefix

Aggregate prefix

summary-only

(Optional) Don't advertise more specifics

as-set

(Optional) Generate AS-SET information

suppress-map

(Optional) Conditionally filter more specific routes

advertise-map

(Optional) Select attribute information from specific routes

attribute-map

(Optional) Set attribute information of aggregate

advertise-rmap

(Optional) Route-map name

suppress-rmap

(Optional) Route-map name

attribute-rmap

(Optional) Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

aggregate-address

[no] aggregate-address <ipv6-prefix> [ as-set | summary-only | suppress-map <suppress-rmap> | advertise-map <advertise-rmap> | attribute-map <attribute-rmap> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

aggregate-address

Configure BGP aggregate IPv6 prefixes

as-set

(Optional) Generate AS-SET information

summary-only

(Optional) Don't advertise more specifics

suppress-map

(Optional) Conditionally filter more specific routes

advertise-map

(Optional) Select attribute information from specific routes

attribute-map

(Optional) Set attribute information of aggregate

advertise-rmap

(Optional) Route-map name

suppress-rmap

(Optional) Route-map name

attribute-rmap

(Optional) Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

aigp

[ no | default ] aigp

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

aigp

Enable AIGP

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6

air-print helper

[no] air-print helper

Syntax Description

no

(Optional) Negate a command or set its defaults

air-print

Airprint Helper functionality - enabling sub-PTR functionality

helper

Airprint Helper functionality - enabling sub-PTR functionality

Command Mode

  • /exec/configure/mdns-sd

alert-group user-def-cmd

{ alert-group { Configuration | Diagnostic | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test } [ index <i0> ] user-def-cmd <s0> | no alert-group { Configuration | Diagnostic | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test } index <i0> }

Syntax Description

no

Negate a command or set its defaults

alert-group

alert group

user-def-cmd

configure a cli command for an alert group

index

(Optional) configure an index(1 to 5) for the cli command for the alert group

i0

(Optional) Index between 1 to 5 associate with cli command for an alert group

s0

A valid CLI command

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

Command Mode

  • /exec/configure/callhome

alloc mode

[no] alloc mode <sid-alloc-mode>

Syntax Description

no

(Optional) Negate a command or set its defaults

alloc

Sid allocation parameters

mode

Specify sid allocation mode

sid-alloc-mode

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf-af/router-bgp-vrf-af-srv6 /exec/configure/router-bgp/router-bgp-af/router-bgp-af-srv6

alloc mode

[no] alloc mode <sid-alloc-mode>

Syntax Description

no

(Optional) Negate a command or set its defaults

alloc

Sid allocation parameters

mode

Specify sid allocation mode

sid-alloc-mode

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf/router-bgp-vrf-srv6 /exec/configure/router-bgp/router-bgp-srv6

allocate-index

{ allocate-index <id> } | { no allocate-index [ <id> ] }

Syntax Description

no

Unconfigure allocate-index

allocate-index

Configure allocate-index

id

Specify allocate-index

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf

allocate-label all

[no] allocate-label { all | route-map <rmap-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

allocate-label

Configure label allocation for this AF

all

Allocate labels for all routes

route-map

Allocate labels for selected routes

rmap-name

Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-af-ipv4

allocate-label option-b

[no] allocate-label option-b

Syntax Description

no

(Optional) Negate a command or set its defaults

allocate-label

Allow allocation of labels

option-b

Allow allocation of option B labels

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

allocate1 interface2

allocate1 interface2 { <interface-id> [ force ] | unallocated-interfaces }

Syntax Description

allocate1

Assign interfaces to vdc

interface2

Assign interface range to vdc

interface-id

Assign interface range to vdc

force

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

unallocated-interfaces

Best-effort trying to move all interfaces in the unallocated pool into this vdc

Command Mode

  • /exec/configure/vdc

allocate2 fcoe-vlan-range

{ allocate2 fcoe-vlan-range [ <vlan_range> ] [ from vdcs <vdc_names> ] } | { no allocate2 fcoe-vlan-range [ <vlan_range> | { from vdcs <vdc_names> } ] }

Syntax Description

no

Negate a command or set its defaults

allocate2

Assign interfaces to vdc

fcoe-vlan-range

vlans reserved for FCoE

vlan_range

(Optional) vlans reserved for FCoE

from

(Optional) which vdcs will be sharing ports with the FCoE vdc

vdcs

(Optional) which vdcs will be sharing ports with the FCoE vdc

vdc_names

(Optional) which vdcs will be sharing porst with the FCoE vdc

Command Mode

  • /exec/configure/vdc

allocate3 shared interface3

[no] allocate3 shared interface3 <sinterface-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

allocate3

Assign interfaces to vdc

interface3

Assign interface range to vdc

sinterface-id

Assign interface range to vdc

shared

Shared this port using the reserved FCoE vlans

Command Mode

  • /exec/configure/vdc

allow-vni-in-ethertag

[no] allow-vni-in-ethertag

Syntax Description

no

(Optional) Negate a command or set its defaults

allow-vni-in-ethertag

Allow VNI in Ethernet Tag field in EVPN route

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

allow feature-set

[no] allow feature-set <fs>

Syntax Description

no

(Optional) Negate a command or set its defaults

allow

Used to change permisions inside a vdc

feature-set

Change which feature-sets the user is able to enable inside the vdc

fs

installed feature-sets

Command Mode

  • /exec/configure/vdc

allowas-in

[ no | default ] allowas-in [ <allowas-in-cnt> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

allowas-in

Accept as-path with my AS present in it

allowas-in-cnt

(Optional) Number of occurrences of AS number, default is 3

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

allowas-in

[ no | default ] allowas-in [ <allowas-in-cnt> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

allowas-in

Accept as-path with my AS present in it

allowas-in-cnt

(Optional) Number of occurrences of AS number, default is 3

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

allowed-locators

{ [ no ] allowed-locators { <rloc> | <rloc6> } + }

Syntax Description

no

(Optional) Negate a command or set its defaults

allowed-locators

List of locators from LISP site

rloc

IPv4 locator allowed in registered locator-set

Command Mode

  • /exec/configure/lisp-site /exec/configure/vrf/lisp-site

allowed-vlans

allowed-vlans { <allow-vlans> | add <add-vlans> | except <except-vlans> | remove <remove-vlans> | all }

Syntax Description

allowed-vlans

Set list of allowed vlans that can be used for interface configuration

allow-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

add

add VLANs to the current list

add-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

except

all VLANs except the following

except-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

remove

remove VLANs from the current list

remove-vlans

VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

all

all VLANs

Command Mode

  • /exec/configure/vmt-conn

amt flush-routes

[no] amt flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

amt

AMT global configuration commands

flush-routes

Remove routes when restarting AMT

Command Mode

  • /exec/configure /exec/configure/vrf

amt pseudo-interface

{ { amt pseudo-interface <interface> } | { no amt pseudo-interface [ <interface> ] } }

Syntax Description

no

Negate a command or set its defaults

amt

AMT global configuration commands

pseudo-interface

Tunnel to relay for forwarding IGMP/MLD messages

interface

Intername name to used for AMT pseudo interface

Command Mode

  • /exec/configure /exec/configure/vrf

analytics

[no] analytics

Syntax Description

analytics

Analytics configurations in netflow and analytics mode

Command Mode

  • /exec/configure

analytics cluster

[no] analytics cluster <clustername> [ vrf <vrfName> ] [ srcIf <src_intf> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

analytics

Feature Analytics

cluster

Analytics cluster

clustername

Cluster name

vrf

(Optional) VRF Name

vrfName

(Optional) VRF name

srcIf

(Optional) Source Interface

src_intf

(Optional) Source Interface

Command Mode

  • /exec/configure

announce duration

[no] announce duration <sec> [ renew-offset <off> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

announce

announce

duration

session duration

renew-offset

(Optional) session duration renewal offset

sec

seconds

off

(Optional) offset

Command Mode

  • /exec/configure/ptp-ucast-nego-schema

announce duration range

[no] announce duration range <min> <max>

Syntax Description

no

(Optional) Negate a command or set its defaults

announce

announce

duration

session duration

range

range of acceptable values

min

minimum in seconds

max

maximum in seconds

Command Mode

  • /exec/configure/ptp-ucast-nego-schema

announce interval

[no] announce interval <intv>

Syntax Description

no

(Optional) Negate a command or set its defaults

announce

announce

interval

interval

intv

log seconds

Command Mode

  • /exec/configure/ptp-ucast-nego-schema

announce interval range

[no] announce interval range <min> <max>

Syntax Description

no

(Optional) Negate a command or set its defaults

announce

announce

interval

interval

range

range of acceptable values

min

minimum in log seconds

max

maximum in log seconds

Command Mode

  • /exec/configure/ptp-ucast-nego-schema

anonymous-id

{ [ no ] anonymous-id <id> }

Syntax Description

anonymous-id

anonymous identity associated with this profile

id

identity name

Command Mode

  • /exec/configure/dot1x-cred

anti-jam disable

[no] anti-jam disable

Syntax Description

no

(Optional) Negate a command or set its defaults

anti-jam

Anti-jam mode configuration

disable

Disable anti-jam mode

Command Mode

  • /exec/configure/gnss-if

ao

ao <keychain-name> [ include-tcp-options ] [ accept-ao-mismatch-connections ] | { no | default } ao [ <keychain-name> [ include-tcp-options ] ]

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

ao

Configure TCP-AO authentication

keychain-name

Key chain name

include-tcp-options

(Optional) Include tcp options

accept-ao-mismatch-connections

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

app-default-gateway guest-interface

{ app-default-gateway <ip-addr> guest-interface <interface-id> | no app-default-gateway [ <ip-addr> [ guest-interface <interface-id> ] ] }

Syntax Description

no

Negate a command or set its defaults

app-default-gateway

Application default-gateway

ip-addr

Application default-gateway

guest-interface

guest-interface

interface-id

Guest interface number in range of 0..3

Command Mode

  • /exec/configure/app-hosting-appid

app-default-ipv6-gateway guest-interface

{ app-default-ipv6-gateway <ipv6-addr> guest-interface <interface-id> | no app-default-ipv6-gateway [ <ipv6-addr> [ guest-interface <interface-id> ] ] }

Syntax Description

no

Negate a command or set its defaults

app-default-ipv6-gateway

Application default-ipv6-gateway

guest-interface

guest-interface

interface-id

Guest interface number in range of 0..3

Command Mode

  • /exec/configure/app-hosting-appid

app-hosting appid

app-hosting { activate | start | stop | deactivate | uninstall } appid <app-hosting-appid>

Syntax Description

app-hosting

app-hosting exec actions

activate

Activate the Application

start

Start the Application

stop

Stop the Application

deactivate

Deactivate the Application

uninstall

Uninstall the Application

appid

Application ID

app-hosting-appid

AppId name

Command Mode

  • /exec

app-hosting appid

[no] app-hosting appid <app-hosting-appid>

Syntax Description

no

(Optional) Negate a command or set its defaults

app-hosting

app-hosting

appid

app-hosting appid submode

app-hosting-appid

Enter Application Name

Command Mode

  • /exec/configure

app-hosting bootflash backend storage limit

{ app-hosting bootflash backend storage limit <size> | no app-hosting bootflash backend storage limit [ <size> ] }

Syntax Description

no

Negate a command or set its defaults

app-hosting

app-hosting

bootflash

bootflash

backend

backend

storage

storage

limit

limit

size

size in MB

Command Mode

  • /exec/configure

app-hosting bridge

[no] app-hosting bridge <bridge-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

app-hosting

app-hosting feature configuration

bridge

app-hosting bridge submode

bridge-id

Bridge index

Command Mode

  • /exec/configure

app-hosting data appid copy

app-hosting data appid <app-hosting-appid> copy <src-file> <dst-file>

Syntax Description

app-hosting

app-hosting exec actions

data

Application data

appid

Application ID

app-hosting-appid

AppId name

copy

Copy file

src-file

Source file

dst-file

Destination file

Command Mode

  • /exec

app-hosting data appid delete

app-hosting data appid <app-hosting-appid> delete <dst-file>

Syntax Description

app-hosting

app-hosting exec actions

data

Application data

appid

Application ID

app-hosting-appid

AppId name

delete

Delete file

dst-file

Destination file

Command Mode

  • /exec

app-hosting install appid package

app-hosting install appid <app-hosting-appid> package <uri>

Syntax Description

app-hosting

app-hosting exec actions

install

Install the Application

appid

Application ID

app-hosting-appid

AppId name

package

Package tarball

uri

Package tarball

Command Mode

  • /exec

app-hosting signed-verification disable app-hosting signed-verification enable

[no] app-hosting signed-verification disable | app-hosting signed-verification enable

Syntax Description

no

(Optional) Negate a command or set its defaults

app-hosting

app-hosting

signed-verification

Signature verification for app-hosting application

disable

disable package signing

enable

enable package signing (default)

Command Mode

  • /exec/configure

app-hosting upgrade appid package

app-hosting upgrade appid <app-hosting-appid> package <uri> [ no-recover ]

Syntax Description

app-hosting

app-hosting exec actions

upgrade

Upgrade the Application

appid

Application ID

app-hosting-appid

AppId name

package

Package tarball

uri

Package tarball

no-recover

(Optional) bypass removal of read-only layers

Command Mode

  • /exec

app-resource docker

[no] app-resource docker

Syntax Description

no

(Optional) Negate a command or set its defaults

app-resource

Application resources

docker

Application docker options

Command Mode

  • /exec/configure/app-hosting-appid

app-resource profile custom

[no] app-resource profile custom

Syntax Description

no

(Optional) Negate a command or set its defaults

app-resource

Application resources

profile

Application profile name

custom

custom

Command Mode

  • /exec/configure/app-hosting-appid

app-vnic guest-interface

{ app-vnic { management | gateway bridge <bridge-id> } guest-interface <interface-id> | no app-vnic { management | gateway [ bridge <bridge-id> ] } [ guest-interface <interface-id> ] }

Syntax Description

no

Negate a command or set its defaults

app-vnic

Virtual Network Interface

management

management

gateway

bridge for gateway

bridge

bridge for gateway

bridge-id

bridge for gateway

guest-interface

guest-interface

interface-id

Guest interface number in range of 0..3

Command Mode

  • /exec/configure/app-hosting-appid

app-vnic host

[no] app-vnic host

Syntax Description

no

(Optional) Negate a command or set its defaults

app-vnic

Virtual Network Interface

host

host network

Command Mode

  • /exec/configure/app-hosting-appid

apply profile

[no] apply profile { <all_conf_profile_name> } [ include-profile <include-profile> ] [ { param-instance <plistinst> | include-instance <plistinst> } + ]

Syntax Description

no

(Optional) Negate a command or set its defaults

apply

Apply a config-profile

profile

Apply a config-profile

all_conf_profile_name

Enter the name of the profile

param-instance

(Optional) Enter the name of the param-instance

plistinst

(Optional) Enter the name of the instance

include-profile

(Optional) Enter the name of the include profile

include-profile

(Optional) Enter the name of the include profile

include-instance

(Optional) Enter the param-instance corresponding to the first included profile

plistinst

(Optional) Enter the name of the include instance

Command Mode

  • /exec/configure

area authentication

[no] area <area-id-ip> authentication [ message-digest ]

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

authentication

Enable authentication for the area

message-digest

(Optional) Use message-digest authentication

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area authentication disable ipsec spi md5 sha1 key-chain

{ [ no ] area <area-id-ip> authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> | key-chain <keychain_ah> } } } | { no area <area-id-ip> authentication { disable | ipsec spi <spi_id> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

key-chain

Authentication password key-chain

keychain_ah

Authentication key-chain name

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area default-cost

{ { area <area-id-ip> default-cost <cost> } | { no area <area-id-ip> default-cost [ <cost> ] } }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

default-cost

Specify default-cost for default inter-area-prefix LSA

cost

Cost value

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area default-cost

{ { area <area-id-ip> default-cost <cost> } | { no area <area-id-ip> default-cost [ <cost> ] } }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

default-cost

Specify default-cost for default summary LSA

cost

Cost value

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area encryption disable ipsec spi esp 3des aes 128 authentication sha1

{ [ no ] area <area-id-ip> encryption { disable | ipsec spi <spi_id> esp { 3des <ekey> | aes { 128 <ekey> } } authentication { sha1 <akey> | null } } } | { [ no ] area <area-id-ip> encryption ipsec spi <spi_id> esp key-chain <keychain_enc> authentication { key-chain <keychain_ah> | null } } | { [ no ] area <area-id-ip> encryption ipsec spi <spi_id> esp null authentication { sha1 <akey> | key-chain <keychain_ah> } } | { no area <area-id-ip> encryption ipsec spi <spi_id> }

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

encryption

Enable Encryption on all Interface belong to this Area

disable

Disable Encryption

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

esp

Specify encryption parameters

3des

Use the triple DES algorithim

ekey

Encryption Key

aes

Use the AES algorithim

128

Use the 128-bit AES algorithim

ekey

Encryption Key

authentication

Specify authentication parameters

sha1

Use the SHA1 algorithim

akey

Authentication Key

key-chain

Encryption password key-chain

keychain_enc

Encryption key-chain name

key-chain

Authentication password key-chain

keychain_ah

Authentication key-chain name

null

Use NULL authentication

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area filter-list route-map in

{ area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } { in | out } } | { no area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } [ in | out ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

route-map

Name of filter policy

policy-name

Route-map name

rtr_pol_name

An existing routing-rules policy

in

Filter networks sent to this area

out

Filter networks sent from this area

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area filter-list route-map in

{ area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } { in | out } } | { no area <area-id-ip> filter-list route-map { <policy-name> | <rtr_pol_name> } [ in | out ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

route-map

Name of filter policy

policy-name

Route-map name

rtr_pol_name

An existing routing-rules policy

in

Filter networks sent to this area

out

Filter networks sent from this area

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa

[no] area <area-id-ip> nssa { [ no-summary ] [ no-redistribution ] [ default-information-originate [ route-map <policy-name> ] ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

no-summary

(Optional) Do not send summary LSAs into NSSA area

no-redistribution

(Optional) Do not send redistributed LSAs into NSSA area

default-information-originate

(Optional) Originate Type-7 default LSA into NSSA area

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa

[no] area <area-id-ip> nssa { [ no-summary ] [ no-redistribution ] [ default-information-originate [ route-map <policy-name> ] ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

no-summary

(Optional) Do not send summary LSAs into NSSA area

no-redistribution

(Optional) Do not send redistributed LSAs into NSSA area

default-information-originate

(Optional) Originate Type-7 default LSA into NSSA area

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area nssa translate type7 always never supress-fa

{ area <area-id-ip> nssa translate type7 { always [ supress-fa ] | never | supress-fa } } | { no area <area-id-ip> nssa translate type7 [ always [ supress-fa ] | never | supress-fa ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

translate

Translate LSA

type7

From Type 7 to Type 5

always

Always translate LSAs

never

Never translate LSAs

supress-fa

(Optional) Supress forwarding address in translated LSAs

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area nssa translate type7 always never supress-fa

{ area <area-id-ip> nssa translate type7 { always [ supress-fa ] | never | supress-fa } } | { no area <area-id-ip> nssa translate type7 [ always [ supress-fa ] | never | supress-fa ] }

Syntax Description

no

Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

nssa

Configure area as NSSA

translate

Translate LSA

type7

From NSSA-external (Type 7) to AS-external (Type 5)

always

Always translate LSAs

never

Never translate LSAs

supress-fa

(Optional) Supress forwarding address in translated LSAs

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area range

[no] area <area-id-ip> range { <ip-dest> <ip-mask> | <ip-prefix> } { [ not-advertise ] [ cost <conf-cost> ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

range

Configure an address range for an area

ip-dest

IP prefix format: i.i.i.i

ip-mask

IP network mask format: m.m.m.m

ip-prefix

IP prefix format: x.x.x.x/ml

not-advertise

(Optional) Suppress advertising the specified range

cost

(Optional) Cost to use for range

conf-cost

(Optional) Cost value

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area range

[no] area <area-id-ip> range <ipv6-prefix> { [ not-advertise ] [ cost <conf-cost> ] } +

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

range

Configure an address range for an area

not-advertise

(Optional) Suppress advertising the specified range

cost

(Optional) Cost to use for range

conf-cost

(Optional) Cost value

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area segment-routing mpls

[no] area <area-id-ip> segment-routing { mpls | disable }

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

segment-routing

Segment routing parameters

disable

Disable segment routing in area

mpls

Enable segment routing MPLS in area

Command Mode

  • /exec/configure/router-ospf

area sham-link

[no] area <area-id-ip> sham-link <source-address> <dest-address>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

sham-link

Define a sham link and its parameters

source-address

IP addr associated with sham-link source

dest-address

IP addr associated with sham-link destination

Command Mode

  • /exec/configure/router-ospf/vrf

area stub

[no] area <area-id-ip> stub [ no-summary ]

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

stub

Configure area as a stub

no-summary

(Optional) Prevent ABR from sending summary LSAs into stub area

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

area stub

[no] area <area-id-ip> stub [ no-summary ]

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

stub

Configure area as a stub

no-summary

(Optional) Prevent ABR from sending summary LSAs into stub area

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

  • /exec/configure/router-ospf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

  • /exec/configure/router-ospf3

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

  • /exec/configure/router-ospf3/vrf

area virtual-link

[no] area <area-id-ip> virtual-link <routerid>

Syntax Description

no

(Optional) Negate a command or set its defaults

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

virtual-link

Define a virtual link and its parameters

routerid

Router ID associated with virtual link neighbor

Command Mode

  • /exec/configure/router-ospf/vrf

arp access-list

[no] arp access-list <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

arp

ARP access-list configuration commands

access-list

Configure access list

name

List name

Command Mode

  • /exec/configure

as-format asdot

as-format asdot | no as-format

Syntax Description

no

Negate a command or set its defaults

as-format

Configure the router's Autonomous system number (ASN) notation

asdot

Specifies the Autonomous system number (ASN) notation to asdot format

Command Mode

  • /exec/configure

as-override

[ no | default ] as-override

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

as-override

Override matching AS-number while sending update

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

association-group

[no] association-group

Syntax Description

no

(Optional) Negate a command or set its defaults

association-group

Candidate path association group

Command Mode

  • /exec/configure/sr/te/pol/cndpaths/pref/constraint

association-group

[no] association-group

Syntax Description

no

(Optional) Negate a command or set its defaults

association-group

Candidate path association group

Command Mode

  • /exec/configure/sr/te/color/cndpaths/pref/constraint

attach console module

attach console module <module>

Syntax Description

attach

Connect to a specific linecard

console

Connect to the console

module

Connect to the module console

module

Enter module number

Command Mode

  • /exec

attach module

attach module <module>

Syntax Description

attach

Connect to a specific linecard

module

Module number of the linecard

module

Enter module number

Command Mode

  • /exec

attribute-group

[no] attribute-group <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

attribute-group

Attach attribute group

s0

Enter the name of attribute-group

Command Mode

  • /exec/configure/zoneset/zone

attribute-group

[no] attribute-group

Syntax Description

no

(Optional) Negate a command or set its defaults

attribute-group

Define attribute-group for default-zone

Command Mode

  • /exec/configure/default-zone

attribute-group

[no] attribute-group <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

attribute-group

Attach attribute group

s0

Enter the name of attribute-group

Command Mode

  • /exec/configure/zone

auth-mechanism plain

[no] auth-mechanism { plain }

Syntax Description

no

(Optional) Negate a command or set its defaults

auth-mechanism

Set the authentication mechanism

plain

Set the authentication mechanism as plain(default)

Command Mode

  • /exec/configure/ldap

authentication-check

[no] authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

authentication-check

[no] authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication-check level-1

[no] authentication-check level-1

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

level-1

Specify authentication check for level-1 LSP, CSNP and PSNP

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

authentication-check level-2

[no] authentication-check level-2

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-check

Check authentication on received LSP/CSNP/PSNP's

level-2

Specify authentication check for level-2 LSP, CSNP and PSNP

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

authentication-key

{ { authentication-key <key> } | { no authentication-key [ <key> ] } }

Syntax Description

no

Negate a command or set its defaults

authentication-key

Configure the authentication key for the sham-link

key

Authentication key

Command Mode

  • /exec/configure/router-ospf/vrf/router-ospf-slink

authentication-key

{ { authentication-key <key> } | { no authentication-key [ <key> ] } }

Syntax Description

no

Negate a command or set its defaults

authentication-key

Configure the authentication key for the virtual-link

key

Authentication key

Command Mode

  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication-key

{ [ no ] authentication-key <key> }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-key

Authentication key used by LISP site

key

SHA-1 password

Command Mode

  • /exec/configure/lisp-site /exec/configure/vrf/lisp-site

authentication-type cleartext

{ authentication-type { cleartext | md5 } | no authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication-type cleartext

{ authentication-type { cleartext | md5 } | no authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

authentication-type cleartext level-1

[no] authentication-type { cleartext | md5 } level-1

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

level-1

Specify authentication type for level-1 LSP, CSNP and PSNP

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

authentication-type cleartext level-2

[no] authentication-type { cleartext | md5 } level-2

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication-type

Set authentication type

cleartext

Cleartext

md5

HMAC-MD5

level-2

Specify authentication type for level-2 LSP, CSNP and PSNP

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

authentication

[no] authentication [ message-digest | null ]

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Authentication on the slink

message-digest

(Optional) Use message-digest authentication

null

(Optional) Use null(disable) authentication

Command Mode

  • /exec/configure/router-ospf/vrf/router-ospf-slink

authentication

authentication { [ text ] <secret> | md5 { key-chain <chain-name> | key-string [ 0 | 7 ] <key-name> [ compatibility ] [ timeout <sec> ] } } | no authentication

Syntax Description

no

Negate a command or set its defaults

authentication

Authentication

text

(Optional) Plain text authentication

secret

Plain text authentication string

md5

Use MD5 authentication

key-chain

Set key chain

chain-name

Name of key-chain

key-string

Set key string

0

(Optional) Specifies an UNENCRYPTED key string will follow

7

(Optional) Specifies a HIDDEN key string will follow

key-name

Key string (64 chars max)

compatibility

(Optional) Operate in compatibility mode for MD5 type-7 authentication

timeout

(Optional) Set timeout

sec

(Optional) (0-32767)Timeout until only accepting new key (seconds)

Command Mode

  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

authentication

[no] authentication [ message-digest | null ]

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Authentication on the vlink

message-digest

(Optional) Use message-digest authentication

null

(Optional) Use null(disable) authentication

Command Mode

  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication bind

[no] authentication { bind-first [ append-with-basedn <s1> ] | compare [ password-attribute <s0> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Set the authentication method

bind-first

Set the authentication method to bind-first

append-with-basedn

(Optional) Change the default value (cn=$userid)

s1

(Optional) append with dn value

compare

Change the default attribute

password-attribute

(Optional) Change the default password attribute (userPassword)

s0

(Optional) password attribute

Command Mode

  • /exec/configure/ldap

authentication disable ipsec spi md5 sha1 key-chain

{ [ no ] authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> | key-chain <keychain_ah> } } } | { no authentication { disable | ipsec spi <spi_id> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

key-chain

Authentication password key-chain

keychain_ah

Authentication key-chain name

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

authentication ipsec spi md5 sha1 key-chain

{ [ no ] authentication { ipsec spi <spi_id> { md5 <akey> | sha1 <akey> | key-chain <keychain_ah> } } } | { no authentication ipsec spi <spi_id> }

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Enable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

key-chain

Authentication password key-chain

keychain_ah

Authentication key-chain name

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

authentication key-chain

{ authentication key-chain <keychain> } | { no authentication key-chain [ <keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Authentication on the vlink

key-chain

Authentication password key-chain

keychain

Key-chain name

Command Mode

  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication key-chain

[no] authentication key-chain <chain>

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Configures EIGRP authentication subcommands

key-chain

key-chain

chain

name of key-chain

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

authentication key-chain

{ authentication key-chain <keychain> } | { no authentication key-chain [ <keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Authentication on the slink

key-chain

Authentication password key-chain

keychain

Key-chain name

Command Mode

  • /exec/configure/router-ospf/vrf/router-ospf-slink

authentication key-chain

{ authentication key-chain <auth-keychain> | no authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

authentication key-chain

{ authentication key-chain <auth-keychain> | no authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

authentication key-chain level-1

[no] authentication key-chain <auth-keychain> level-1

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

level-1

Specify authentication key for level-1 LSP, CSNP and PSNP

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

authentication key-chain level-2

[no] authentication key-chain <auth-keychain> level-2

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Set authentication keychain string

key-chain

Set authentication keychain string

auth-keychain

authentication keychain

level-2

Specify authentication key for level-2 LSP, CSNP and PSNP

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

authentication mode md5

[no] authentication mode md5

Syntax Description

no

(Optional) Negate a command or set its defaults

authentication

Configures EIGRP authentication subcommands

mode

mode

md5

Keyed message digest

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

authentication text

{ authentication text <authentication_pwd> | no authentication [ text <authentication_pwd> ] }

Syntax Description

no

Negate a command or set its defaults

authentication

Select authentication method

text

Set the authentication password (8 char max)

authentication_pwd

Command Mode

  • /exec/configure/if-eth-any/vrrp

auto-cost reference-bandwidth

auto-cost reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps } | no auto-cost reference-bandwidth [ <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps ]

Syntax Description

no

Negate a command or set its defaults

auto-cost

Calculate OSPFv3 cost according to bandwidth

reference-bandwidth

Reference bandwidth used to assign OSPFv3 cost

Mbps

(Optional) Specify rate in Mbps

Gbps

Specify rate in Gbps

ref-bw-mbps

Rate in Mbps (bandwidth) (Default)

ref-bw-gbps

Rate in Gbps (bandwidth)

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

auto-cost reference-bandwidth

auto-cost reference-bandwidth { <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps } | no auto-cost reference-bandwidth [ <ref-bw-mbps> [ Mbps ] | <ref-bw-gbps> Gbps ]

Syntax Description

no

Negate a command or set its defaults

auto-cost

Calculate OSPF cost according to bandwidth

reference-bandwidth

Reference bandwidth used to assign OSPF cost

Mbps

(Optional) Specify rate in Mbps

Gbps

Specify rate in Gbps

ref-bw-mbps

Rate in Mbps (bandwidth) (Default)

ref-bw-gbps

Rate in Gbps (bandwidth)

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

auto-recovery

auto-recovery [ reload-delay <time-out> ] | no auto-recovery [ reload-delay <time-out> ]

Syntax Description

no

Negate a command or set its defaults

auto-recovery

vPC settings to enable auto recovery if peer is presumed non-operational

reload-delay

(Optional) Duration to wait before assuming peer dead and restoring vpcs

time-out

(Optional) Time-out for restoring vPC links (in seconds)

Command Mode

  • /exec/configure/vpc-domain

autonomous-system

{ { autonomous-system <local-as> } | { no autonomous-system [ <local-as> ] } }

Syntax Description

no

Negate a command or set its defaults

autonomous-system

Specify AS number for Address Family

local-as

Local AS number

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

autostate

[no] autostate

Syntax Description

no

(Optional) Negate a command or set its defaults

autostate

Enable or disable autostate for interface-vlan

Command Mode

  • /exec/configure/if-vlan

autovlan enable

[no] autovlan enable

Syntax Description

no

(Optional) Negate a command or set its defaults

autovlan

Automatic creation/deletion of VLANs

enable

Enable auto creation/deletion of VLANs

Command Mode

  • /exec/configure/vmt-conn

awk

| awk <expr>

Syntax Description

|

Pipe command output to filter

awk

Mini AWK

expr

Edition command (script)

Command Mode

  • /output