O Commands

oam-channel

{ oam-channel <val> } | { no oam-channel }

Syntax Description

oam-channel

oam-channel used

val

2 - nvo3 tissa

Command Mode

  • /exec/configure/configngoamprofile

oam

[no] oam

Syntax Description

no

(Optional) Negate a command or set its defaults

oam

Configure MPLS OAM traffic Engineering Segment Routing liveness detection configurations

Command Mode

  • /exec/configure/sr/te/live-det/mpls

oam

[no] oam

Syntax Description

no

(Optional) Negate a command or set its defaults

oam

Configure MPLS OAM traffic Engineering Segment Routing liveness detection configurations

Command Mode

  • /exec/configure/sr/te/color/live-det/mpls

oam

[no] oam

Syntax Description

no

(Optional) Negate a command or set its defaults

oam

Configure MPLS OAM traffic Engineering Segment Routing liveness detection configurations

Command Mode

  • /exec/configure/sr/te/pol/live-det/mpls

object-group ip address

[no] object-group ip address <ip-obj-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ip

IP Object groups

address

Address object group

ip-obj-name

object-group name

Command Mode

  • /exec/configure

object-group ip port

[no] object-group ip port <port-obj-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ip

IP Object groups

port

IP port object group (can be used in IPv4 and IPv6 access-lists)

port-obj-name

object-group name

Command Mode

  • /exec/configure

object-group ipv6 address

[no] object-group ipv6 address <ipv6-obj-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ipv6

IPv6 Object groups

address

Address object group

ipv6-obj-name

object-group name

Command Mode

  • /exec/configure

object-group udp relay ip address

[no] object-group udp relay ip address <obj-grp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure object groups

udp

Configure UDP

relay

Configure UDP Relay

ip

IP Object groups

address

Address object group

obj-grp-name

object-group name

Command Mode

  • /exec/configure

object-track

[no] object-track <object-number> [ decrement <value> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

object-track

Associates track object to VRRP group

object-number

Set the object number to the group

decrement

(Optional) Decrements vrrp group priority when tracked object goes down

value

(Optional) Set the value to decrement from priority

Command Mode

  • /exec/configure/if-eth-any/vrrpv3

ocsp url

[no] ocsp url <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ocsp

Configure trustpoint ocsp details

url

Configure trustpoint ocsp url

s0

ocsp url

Command Mode

  • /exec/configure/trustpoint

ols

ols { com egress gain <com_gain> | line egress gain <line_gain> } | no ols { com egress gain [ <com_gain> ] | line egress gain [ <line_gain> ] }

Syntax Description

no

Negate a command or set its defaults

ols

Configure Optical Line System

com

Configure com

egress

Configure egress

gain

Configure egress ampli gain

com_gain

set com egress ampli gain

line

Configure line

egress

Configure egress

gain

Configure egress ampli gain

line_gain

set line egress ampli gain

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

ols

ols { com egress power <com_power> | line egress power <line_power> } | no ols { com egress power [ <com_power> ] | line egress power [ <line_power> ] }

Syntax Description

no

Negate a command or set its defaults

ols

Configure Optical Line System

com

Configure com

egress

Configure egress

power

Configure egress ampli power

com_power

set com egress ampli power

line

Configure line

egress

Configure egress

power

Configure egress ampli power

line_power

set line egress ampli power

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

ols com egress control

ols { com | line } egress control <mode> | no ols { com | line } egress control [ <mode> ]

Syntax Description

no

Negate a command or set its defaults

ols

Configure Optical Line System

com

Configure com

line

Configure line

egress

Configure egress

control

Configure ampli control mode

mode

configure mode

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

ols com egress osri

[no] ols { com | line } egress osri

Syntax Description

no

(Optional) Negate a command or set its defaults

ols

Configure Optical Line System

com

Configure com

line

Configure line

egress

Configure egress

osri

Configure egress ampli osri

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

ols line egress safety-control

[no] ols line egress safety-control

Syntax Description

no

(Optional) Negate a command or set its defaults

ols

Configure Optical Line System

line

Configure line

egress

Configure egress

safety-control

Configure egress ampli safety control mode

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

on-demand color

[no] on-demand color <color>

Syntax Description

no

(Optional) Negate a command or set its defaults

on-demand

Configure on-demand color

color

Color

color

Color

Command Mode

  • /exec/configure/sr/te

operation-packet-priority normal

{ { no | default } operation-packet-priority | operation-packet-priority { normal | high } }

Syntax Description

no

default

Set a command to its defaults

operation-packet-priority

Set operation packet properties

high

Priority high

normal

Priority normal

Command Mode

  • /exec/configure/ip-sla/jitter

option exporter-stats timeout

{ [ no ] option exporter-stats timeout <time> | no option exporter-stats timeout }

Syntax Description

option

Version 9 Option Templates and Data

exporter-stats

Exporter Statistics Option

timeout

Option resend time

time

Time in seconds

Command Mode

  • /exec/configure/nfm-exporter-v9

option interface-table timeout

{ [ no ] option interface-table timeout <time> | no option interface-table timeout }

Syntax Description

option

Version 9 Option Templates and Data

interface-table

Interface Table Option

timeout

Option resend time

time

Time in seconds

Command Mode

  • /exec/configure/nfm-exporter-v9

origin-as validate

[no] origin-as validate

Syntax Description

no

(Optional) Negate a command or set its defaults

origin-as

RPKI origin-as validation related functionality

validate

Enable RPKI origin-as validation for routes received from ebgp neighbors

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

origin-as validate signal ibgp

[no] origin-as validate signal ibgp

Syntax Description

no

(Optional) Negate a command or set its defaults

origin-as

RPKI origin-as validation related functionality

validate

Enable RPKI origin-as validation for routes received from ebgp neighbors

signal

Send RPKI validation state using Origin Validation State Extended Community

ibgp

Send Origin Validation State Extended Community to ibgp neighbors

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

originate-map

[no] originate-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

originate-map

Configure originate-map

rmap-name

Route-map name

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

ospfv3 authentication disable ipsec spi md5 sha1 key-chain

{ [ no ] ospfv3 authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> | key-chain <keychain_ah> } } } | { no ospfv3 authentication { disable | ipsec spi <spi_id> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

key-chain

Authentication password key-chain

keychain_ah

Authentication key-chain name

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 bfd

[no] ospfv3 bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

bfd

Enable BFD on this interface

disable

(Optional) Disable BFD on this interface

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ospfv3 cost

{ ospfv3 cost <cost> } | { no ospfv3 cost [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

cost

Cost associated with interface

cost

Cost value

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 dead-interval

{ ospfv3 dead-interval <interval> } | { no ospfv3 dead-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

dead-interval

Dead interval

interval

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 encryption disable ipsec spi esp 3des aes 128 authentication sha1

{ [ no ] ospfv3 encryption { disable | ipsec spi <spi_id> esp { 3des <ekey> | aes { 128 <ekey> } } authentication { sha1 <akey> | null } } } | { [ no ] ospfv3 encryption ipsec spi <spi_id> esp key-chain <keychain_enc> authentication { key-chain <keychain_ah> | null } } | { [ no ] ospfv3 encryption ipsec spi <spi_id> esp null authentication { sha1 <akey> | key-chain <keychain_ah> } } | { no ospfv3 encryption ipsec spi <spi_id> }

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

encryption

Enable Encryption on this Interface

disable

Disable Encryption

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

esp

Specify encryption parameters

3des

Use the triple DES algorithim

ekey

Encryption Key

aes

Use the AES algorithim

128

Use the 128-bit AES algorithim

ekey

Encryption Key

authentication

Specify authentication parameters

sha1

Use the SHA1 algorithim

akey

Authentication Key

key-chain

Encryption password key-chain

keychain_enc

Encryption key-chain name

key-chain

Authentication password key-chain

keychain_ah

Authentication key-chain name

null

Use NULL authentication

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 event-history cli

[ no ospfv3 event-history cli ] | [ ospfv3 event-history cli size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

cli

(Optional) Cli logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure/router-ospf3

ospfv3 hello-interval

{ ospfv3 hello-interval <interval> } | { no ospfv3 hello-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 instance

{ ospfv3 instance <instance-id> } | { no ospfv3 instance [ <instance-id> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

instance

Instance identifier

instance-id

Instance identifier value

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 mtu-ignore

[no] ospfv3 mtu-ignore

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

mtu-ignore

Disable OSPF MTU mismatch detection

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 network broadcast

{ ospfv3 network { broadcast | point-to-point } } | { no ospfv3 network [ { broadcast | point-to-point } ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

network

Network type

broadcast

Specify OSPF broadcast multi-access network

point-to-point

Specify OSPF point-to-point network

Command Mode

  • /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ospfv3 network point-to-point

{ ospfv3 network point-to-point } | { no ospfv3 network [ point-to-point ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

network

Network type

point-to-point

Specify OSPF point-to-point network

Command Mode

  • /exec/configure/if-loopback

ospfv3 passive-interface

[ default | no ] ospfv3 passive-interface

Syntax Description

default

(Optional) Undo a command

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

passive-interface

Suppress routing updates on the interface

Command Mode

  • /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ospfv3 priority

{ ospfv3 priority <prio> } | { no ospfv3 priority [ <prio> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

priority

Router priority

prio

Router priority

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 retransmit-interval

{ ospfv3 retransmit-interval <interval> } | { no ospfv3 retransmit-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 shutdown

[no] ospfv3 shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

shutdown

Shutdown ospf on this interface

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ospfv3 transmit-delay

{ ospfv3 transmit-delay <delay> } | { no ospfv3 transmit-delay [ <delay> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

other-config-flag

[no] other-config-flag <state>

Syntax Description

no

(Optional) Negate a command or set its defaults

state

Command Mode

  • /exec/configure/config-ra-guard

otv-isis

otv-isis <tag>

Syntax Description

otv-isis

Intermediate System to Intermediate System (IS-IS)

tag

Routing process tag

Command Mode

  • /exec/configure

otv isis authentication-check

[no] otv isis authentication-check

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

authentication-check

Check authentication on received hellos

Command Mode

  • /exec/configure/if-overlay /exec/configure/site-vlan

otv isis authentication-type cleartext

{ otv isis authentication-type { cleartext | md5 } | no otv isis authentication-type [ { cleartext | md5 } ] }

Syntax Description

no

Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

authentication-type

Set hello authentication type

cleartext

Cleartext

md5

HMAC-MD5

Command Mode

  • /exec/configure/if-overlay /exec/configure/site-vlan

otv isis authentication key-chain

{ otv isis authentication key-chain <auth-keychain> | no otv isis authentication key-chain [ <auth-keychain> ] }

Syntax Description

no

Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

authentication

Set hello authentication keychain

key-chain

Set hello authentication keychain

auth-keychain

authentication keychain

Command Mode

  • /exec/configure/if-overlay /exec/configure/site-vlan

otv isis csnp-interval

[no] otv isis csnp-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

csnp-interval

Set CSNP interval in seconds

sec

CSNP interval value

Command Mode

  • /exec/configure/if-overlay

otv isis hello-interval

[no] otv isis hello-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

hello-interval

Set Hello interval in seconds

sec

Hello interval value

Command Mode

  • /exec/configure/if-overlay

otv isis hello-interval

[no] otv isis hello-interval <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

hello-interval

Set Hello interval in seconds

sec

Hello interval value

Command Mode

  • /exec/configure/site-vlan

otv isis hello-multiplier

[no] otv isis hello-multiplier <multi>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

hello-multiplier

Set multiplier for Hello holding time

multi

Hello multiplier value

Command Mode

  • /exec/configure/site-vlan

otv isis hello-multiplier

[no] otv isis hello-multiplier <multi>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

hello-multiplier

Set multiplier for Hello holding time

multi

Hello multiplier value

Command Mode

  • /exec/configure/if-overlay

otv isis hello-padding

{ otv isis hello-padding | no otv isis hello-padding [ always ] }

Syntax Description

no

Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

hello-padding

Pad IS-IS hello PDUs to full MTU

always

(Optional) Pad every hello

Command Mode

  • /exec/configure/if-overlay /exec/configure/site-vlan

otv isis lsp-interval

[no] otv isis lsp-interval <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

lsp-interval

Set LSP transmission interval

msec

LSP transmission interval (milliseconds)

Command Mode

  • /exec/configure/if-overlay

otv isis metric

[no] otv isis metric <metric>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

metric

Configure the metric for interface

metric

Default metric

Command Mode

  • /exec/configure/if-overlay

otv isis priority

[no] otv isis priority <priority>

Syntax Description

no

(Optional) Negate a command or set its defaults

otv

Configure OTV information

isis

IS-IS configuration commands

priority

Set priority for DIS election

priority

Priority value

Command Mode

  • /exec/configure/if-overlay

overlay-encapsulation

overlay-encapsulation <encap-type> [ tunnel-control-frames [ <layer2-prot> ] ] | no overlay-encapsulation

Syntax Description

no

Negate a command or set its defaults

overlay-encapsulation

NVE Overlay Encapsulation

encap-type

Configure encapsulation type

tunnel-control-frames

(Optional) tunnel protocol

layer2-prot

(Optional) configure specific protocol

Command Mode

  • /exec/configure/if-nve

overwrite-vlan

[no] overwrite-vlan <ow-vlan-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

overwrite-vlan

Overwrite the system generated vlan

ow-vlan-id

Command Mode

  • /exec/configure/static-host/vni

owner

{ { no | default } owner | owner <text> }

Syntax Description

no

default

Set a command to its defaults

owner

Owner of Entry

text

Owner String

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http