F Commands

fabric-advertise-pip l3

[no] fabric-advertise-pip l3

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-advertise-pip

Advertise-PIP towards fabric

l3

For evpn type-5 routes

Command Mode

  • /exec/configure/config-evpn-msite-bgw

fabric-binding activate vsan

[no] fabric-binding activate vsan <i0> [ [ force ] [ no-auto-learn ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-binding

Fabric Binding configuration

activate

Activate Configured Fabric Bindings

vsan

VSAN id for fabric bindings

i0

VSAN range

force

(Optional) Activate even if it is an erronious activation

no-auto-learn

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec/configure

fabric-binding database copy vsan

fabric-binding database copy vsan <i0>

Syntax Description

fabric-binding

Fabric binding

database

Fabric binding database

copy

Copy active to config database

vsan

VSAN Id

i0

VSAN range

Command Mode

  • /exec

fabric-binding database diff active vsan

fabric-binding database diff active vsan <i0>

Syntax Description

fabric-binding

Fabric binding

database

Fabric binding database

diff

Difference in fabric-binding database

active

Active database wrt Configured database

vsan

VSAN Id

i0

VSAN number

Command Mode

  • /exec

fabric-binding database diff config vsan

fabric-binding database diff config vsan <i0>

Syntax Description

fabric-binding

Fabric binding

database

Fabric binding database

diff

Difference in fabric-binding database

config

Configured database wrt Active database

vsan

VSAN Id

i0

VSAN number

Command Mode

  • /exec

fabric-binding database vsan

[no] fabric-binding database vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-binding

Fabric Binding configuration

database

Fabric Binding Config database

vsan

VSAN id for fabric bindings

i0

VSAN number

Command Mode

  • /exec/configure

fabric-binding fip enable

[no] fabric-binding fip enable <fip_id> <fip_action_id>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-binding

Fabric Binding configuration

fip

Fault Injection Point enabling or disabling

enable

Enabling FIP

fip_id

FIP Id

fip_action_id

FIP action ID

Command Mode

  • /exec/configure

fabric-binding restart

fabric-binding restart

Syntax Description

fabric-binding

Fabric Binding configuration

restart

Restart PSM Process using FIP

Command Mode

  • /exec

fabric-port-channel vhba-reset

[no] fabric-port-channel vhba-reset

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-port-channel

Port on which this is feature is applied

vhba-reset

Send RSCNs to vhba on fabric-po member shut/down event

Command Mode

  • /exec/configure

fabric-ready time

fabric-ready time <sec> | no fabric-ready time [ <sec> ]

Syntax Description

no

Negate a command or set its defaults

fabric-ready

fabric ready time

time

time

sec

time in seconds

Command Mode

  • /exec/configure/if-nve

fabric database auto-pull dci node-id

fabric database auto-pull dci node-id <mgmt-ip-address>

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

Command Mode

  • /exec

fabric database auto-pull dci vrf node-id

fabric database auto-pull dci vrf <vrf-name> node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

vrf

Display per-VRF information

vrf-name

VRF name

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

Command Mode

  • /exec

fabric database inherit-profile-map

{ fabric database inherit-profile-map <id> } | { no fabric database inherit-profile-map }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

inherit-profile-map

Inherit a profile map. All non-global mappings will be inherited.

id

Profile Map ID

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-port-channel

fabric database mobility-domain

[no] fabric database mobility-domain <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

mobility-domain

Tag to identify mobility domain name

name

Mobility Domain Name

Command Mode

  • /exec/configure

fabric database override-profile

[no] fabric database override-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-profile

Override the network profile name

profilename

Enter the profile name to override network profile

Command Mode

  • /exec/configure

fabric database override-vrf-profile

[no] fabric database override-vrf-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-vrf-profile

Override the VRF (partition) profile name

profilename

Enter the profile name to override VRF profile

Command Mode

  • /exec/configure

fabric database profile-map

[no] fabric database profile-map <id>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

id

Profile Map ID

Command Mode

  • /exec/configure

fabric database profile-map global

[no] fabric database profile-map global

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

global

Global profile (apply to all interfaces)

Command Mode

  • /exec/configure

fabric database refresh dot1q

fabric database refresh dot1q <vlan-id> [ { mobility-domain <name> | interface <interface-id> } ]

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

dot1q

Dot1Q Encapsulation

vlan-id

interface

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

interface-id

(Optional) Name of interface

mobility-domain

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

name

(Optional) Mobility Domain Name

Command Mode

  • /exec

fabric database refresh vni

fabric database refresh { vni <vni-id> | include-vrf { <vrf-name> } }

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

vni

Virtual Network Identifier

vni-id

include-vrf

Include VRF name

vrf-name

VRF name

Command Mode

  • /exec

fabric database static-host

[no] fabric database static-host

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Fabric Database

static-host

Configure a static host

Command Mode

  • /exec/configure

fabric database type bl-dci

[no] fabric database type bl-dci

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

bl-dci

Border Leaf - DCI

Command Mode

  • /exec/configure

fabric database type cabling

[no] fabric database type cabling

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

cabling

Cable Management Database

Command Mode

  • /exec/configure

fabric database type host

[no] fabric database type host

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

host

Host Database

Command Mode

  • /exec/configure

fabric database type network

[no] fabric database type network

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

network

Network Database

Command Mode

  • /exec/configure

fabric database type partition

[no] fabric database type partition

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

partition

Partition Database

Command Mode

  • /exec/configure

fabric database type profile

[no] fabric database type profile

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

profile

Port or Switch Profile Database

Command Mode

  • /exec/configure

fabric forwarding admin-distance

{ fabric forwarding admin-distance <distance> } | { no fabric forwarding admin-distance }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

admin-distance

Administrative distance for HMM host routes

distance

Set the administrative distance for HMM (default is 190)

Command Mode

  • /exec/configure

fabric forwarding anycast-gateway-mac

{ fabric forwarding anycast-gateway-mac <mac-addr> } | { no fabric forwarding anycast-gateway-mac }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

anycast-gateway-mac

Anycast Gateway MAC of the Switch

mac-addr

MAC address

Command Mode

  • /exec/configure

fabric forwarding dup-host-ip-addr-detection

{ fabric forwarding dup-host-ip-addr-detection <mmoves> <nsecs> | no fabric forwarding dup-host-ip-addr-detection }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-ip-addr-detection

To detect duplicate host address in n secs

mmoves

Set Number of host moves to be allowed in n secs. Default is 5

nsecs

Set the duplicate detection timeout in secs for host moves. Default is 180

Command Mode

  • /exec/configure

fabric forwarding dup-host-recovery-timer recover-count

{ fabric forwarding dup-host-recovery-timer <timeout> recover-count <count> | no fabric forwarding dup-host-recovery-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-recovery-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 30 secs

recover-count

Maximum number of refreshes

count

Set the maximum number of host refresh. Default is 5.

Command Mode

  • /exec/configure

fabric forwarding dup-host-unfreeze-timer unfreeze-count

{ fabric forwarding dup-host-unfreeze-timer <timeout> unfreeze-count <count> | no fabric forwarding dup-host-unfreeze-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-unfreeze-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 180 secs

unfreeze-count

Maximum number of refreshes

count

Set the maximum number of host refresh

Command Mode

  • /exec/configure

fabric forwarding limit-vlan-mac

[no] fabric forwarding limit-vlan-mac <max-limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

limit-vlan-mac

Maximum number of end-hosts allowed to have the same (vlan, MAC) mapping in a given vrf (Default is 4096)

max-limit

Set max-limit

Command Mode

  • /exec/configure

fabric forwarding mode anycast-gateway

{ fabric forwarding mode anycast-gateway } | { no fabric forwarding mode }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

mode

Forwarding Modes

anycast-gateway

Anycast Gateway Forwarding Mode

Command Mode

  • /exec/configure/if-vlan /exec/configure/if-vlan-range

fabric forwarding mode anycast-gateway hybrid

[no] fabric forwarding mode anycast-gateway hybrid

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

mode

Forwarding Modes

anycast-gateway

Anycast Gateway Forwarding Mode

hybrid

Hybrid Mode

Command Mode

  • /exec/configure/if-vlan /exec/configure/if-vlan-range

fabric forwarding selective-host-probe

[no] fabric forwarding selective-host-probe

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

selective-host-probe

Trigger unconditional host probe

Command Mode

  • /exec/configure

factory-reset factory-reset module

factory-reset [ bypass-secure-erase ] [ preserve-image ] [ verbose ] [ force ] | factory-reset module <module> [ bypass-secure-erase ] [ preserve-image ] [ verbose ] [ force ]

Syntax Description

factory-reset

Erase persistent storage and reset module to factory defaults

module

Per-module factory reset

module

Enter module number

bypass-secure-erase

(Optional) Bypass secure erase - reformat only

preserve-image

(Optional) Preserve system image

verbose

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

force

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec

factory-reset module all

factory-reset module all [ bypass-secure-erase ] [ preserve-image ] [ verbose ] [ force ]

Syntax Description

factory-reset

Erase persistent storage and reset module to factory defaults

module

Per-module factory reset

all

Select all modules

bypass-secure-erase

(Optional) Bypass secure erase - reformat only

preserve-image

(Optional) Preserve system image

verbose

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

force

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

  • /exec

fast-convergence

fast-convergence | no fast-convergence

Syntax Description

no

Negate a command or set its defaults

fast-convergence

Enable vPC fast-convergence

Command Mode

  • /exec/configure/vpc-domain

fast-external-fallover

[no] fast-external-fallover

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-external-fallover

Immediately reset the session if the link to a directly connected BGP peer goes down

Command Mode

  • /exec/configure/router-bgp

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

fast-reload network-os

fast-reload network-os <uri>

Syntax Description

fast-reload

fast-reload software

network-os

non-cisco OS

uri

Enter image uri

Command Mode

  • /exec

fcalias clone vsan

fcalias clone <s0> <s1> vsan <i0>

Syntax Description

fcalias

Fcalias configuration commands

clone

Fcalias clone command

s0

Current fcalias name

s1

New fcalias name

vsan

clone fcalias name on a vsan

i0

VSAN id

Command Mode

  • /exec/configure

fcalias name vsan

[no] fcalias name <s0> vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcalias

Fcalias configuration commands

name

Configure an fcalias

s0

Enter the name of fcalias

vsan

Configure an fcalias on a VSAN

i0

VSAN id

Command Mode

  • /exec/configure

fcalias rename vsan

fcalias rename <s0> <s1> vsan <i0>

Syntax Description

fcalias

Fcalias configuration commands

rename

Fcalias rename command

s0

Current fcalias name

s1

New fcalias name

vsan

rename fcalias name on a vsan

i0

VSAN id

Command Mode

  • /exec/configure

fcdomain abort vsan

[no] fcdomain abort vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

abort

Flush cached data without commiting and release lock

vsan

Specify the vsan id

i0

VSAN id

Command Mode

  • /exec/configure

fcdomain allowed vsan

[no] fcdomain allowed <i0> vsan <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

allowed

Configure allowed domain IDs

i0

Specify the allowed domain IDs

vsan

Specify the vsan id

i1

VSAN id

Command Mode

  • /exec/configure

fcdomain commit vsan

[no] fcdomain commit vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

commit

Commit cached data and release lock

vsan

Specify the vsan id

i0

VSAN id

Command Mode

  • /exec/configure

fcdomain contiguous-allocation vsan

[no] fcdomain contiguous-allocation vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

contiguous-allocation

Configure the contiguous allocation option

vsan

Specify the vsan range

i0

VSAN id range

Command Mode

  • /exec/configure

fcdomain distribute

[no] fcdomain distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

distribute

Enable fabric distribution using CFS

Command Mode

  • /exec/configure

fcdomain domain

[no] fcdomain domain { <i0> { preferred vsan <i1> | static vsan1 <i2> } | <i3> { preferred vsan2 <i4> | static vsan3 <i5> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

domain

Configure the domain id and its type

i0

Configure the domain id in decimal, 0 not allowed for static dom

preferred

Configure the domain id as preferred

vsan

Specify the vsan range

i1

VSAN id range

static

Configure the domain id as static

vsan1

Specify the vsan range

i2

VSAN id range

i3

Configure the domain id in hexadecimal

preferred

Configure the domain id as preferred

vsan2

Specify the vsan range

i4

VSAN id range

static

Configure the domain id as static

vsan3

Specify the vsan range

i5

VSAN id range

Command Mode

  • /exec/configure

fcdomain fabric-name vsan

[no] fcdomain fabric-name <wwn0> vsan <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

fabric-name

Configure the fabric name

wwn0

Configure the fabric name value

vsan

Specify the vsan id

i1

VSAN id

Command Mode

  • /exec/configure

fcdomain fcid database

[no] fcdomain fcid database

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

fcid

Configure fcdomain persistent FCIDs

database

Enter persistent FCIDs submode

Command Mode

  • /exec/configure

fcdomain fcid persistent vsan

[no] fcdomain fcid persistent vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

fcid

Configure fcdomain persistent FCIDs

persistent

Enable/disable fcdomain persistent FCIDs

vsan

Specify the vsan id

i0

VSAN id

Command Mode

  • /exec/configure

fcdomain free-fcid

fcdomain free-fcid [ [ uuid <i0> ] [ [ fcid <i1> ] [ [ whole-area ] [ [ wwn <wwn2> ] [ vsan <i3> ] ] ] ] ]

Syntax Description

fcdomain

fcdomain internal command

free-fcid

Free FCIDs based on WWN, UUID

uuid

(Optional) Specify the requester UUID

i0

(Optional) requester UUID

fcid

(Optional) Specify the fcid

i1

(Optional) FCID

whole-area

(Optional) Specify if a full area is requested

wwn

(Optional) Specify the requester's WWN

wwn2

(Optional) requester's WWN

vsan

(Optional) Specify the VSAN index

i3

(Optional) VSAN id range

Command Mode

  • /exec

fcdomain optimize

[no] fcdomain optimize { fast-restart vsan <i0> | selective-restart vsan1 <i1> | scale-restart vsan2 <i2> | all vsan3 <i3> }

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

optimize

Enable optimized fcdomain behavior

fast-restart

Fast fabric reconfiguration (Fast BF)

vsan

Specify a list of vsan ranges

i0

VSAN id range

selective-restart

Selective fabric reconfiguration (Selective BF/RCF)

vsan1

Specify a list of vsan ranges

i1

VSAN id range

scale-restart

Scale restart (Consolidated EFP)

vsan2

Specify a list of vsan ranges

i2

VSAN id range

all

Enable all optimizations

vsan3

Specify a list of vsan ranges

i3

VSAN id range

Command Mode

  • /exec/configure

fcdomain priority vsan

[no] fcdomain priority <i0> vsan <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Enter the fcdomain configuration mode

priority

Configure the priority

i0

Specify the priority value

vsan

Specify the vsan range

i1

VSAN id range

Command Mode

  • /exec/configure

fcdomain rcf-reject vsan

[no] fcdomain rcf-reject vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdomain

Configure fcdomain parameters

rcf-reject

Configure the rcf-reject flag

vsan

Specify the vsan range

i0

VSAN id range

Command Mode

  • /exec/configure/if-fc /exec/configure/if-san-port-channel /exec/configure/if-fcip /exec/configure/if-tunnel /exec/configure/if-bay /exec/configure/if-ext /exec/configure/if-vfc

fcdroplatency network

[no] fcdroplatency { network <i0> [ vsan <i1> ] | switch <i2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

fcdroplatency

configure switch or network latency

network

network latency in milliseconds

i0

network latency in milliseconds

vsan

(Optional) VSAN id range

i1

(Optional)

switch

switch latency in milliseconds

i2

switch latency in milliseconds

Command Mode

  • /exec/configure

fcid-allocation area company-id

[no] fcid-allocation area company-id <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

fcid-allocation

Add/remove company id(or OUIs) from auto area list

area

Add/remove company ids(or OUIs) to auto area list

company-id

Company id (or OUI)

i0

Enter company id(or OUI) (0xhhhhhh)

Command Mode

  • /exec/configure

fcinterop fcid-allocation

[no] fcinterop fcid-allocation { auto | flat | none }

Syntax Description

no

(Optional) Negate a command or set its defaults

fcinterop

Interop commands

fcid-allocation

Configure fcid interop mode

auto

Assign single fcid to compatible HBA's

flat

Assign single fcid

none

Assign fcid range

Command Mode

  • /exec/configure

fcinterop loop-monitor

[no] fcinterop loop-monitor

Syntax Description

no

(Optional) Negate a command or set its defaults

fcinterop

Interop commands

loop-monitor

Configure monitoring of NL ports in loop

Command Mode

  • /exec/configure

fcoe

[no] fcoe

Syntax Description

no

(Optional) Negate a command or set its default

fcoe

FCOE Congiguration

Command Mode

  • /exec/configure/vlan

fcoe

[no] fcoe

Syntax Description

no

(Optional) Negate a command or set its defaults

fcoe

create fcoe associate between fex and switch

Command Mode

  • /exec/configure/fex

fcoe enable-fex

[no] fcoe enable-fex

Syntax Description

no

(Optional) Negate a command or set its defaults

fcoe

FCOE command

enable-fex

Enables FCoE over FEX HIF interfaces

Command Mode

  • /exec/configure

fcoe fcf-priority

fcoe fcf-priority <i0> | no fcoe fcf-priority

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

fcf-priority

FCF priority specification

i0

Enter FCF prirority

Command Mode

  • /exec/configure

fcoe fcmap

fcoe fcmap <i0> | no fcoe fcmap

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

fcmap

FC MAP specification

i0

Enter FCMAP

Command Mode

  • /exec/configure

fcoe fka-adv-period

fcoe fka-adv-period <i0> | no fcoe fka-adv-period

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

fka-adv-period

FKA Advertisement Period

i0

FKA Advertisement Period (in sec)

Command Mode

  • /exec/configure

fcoe veloopback

fcoe veloopback | no fcoe veloopback

Syntax Description

no

Negate a command or set its defaults

fcoe

FCOE command

veloopback

VFID check for VE ports

Command Mode

  • /exec/configure

fcoe vsan

fcoe vsan <tran-id> | no fcoe vsan

Syntax Description

no

Negate a command or set its default

fcoe

FCOE Congiguration

vsan

Translated VSAN Status

tran-id

Enter VSAN-ID being associated with VLAN-ID

Command Mode

  • /exec/configure/vlan

fcping

fcping { device-alias <s0> vsan <i0> [ [ count <i1> ] [ [ timeout <i2> ] [ usr-priority <i3> ] ] ] | fcid <i4> vsan1 <i5> [ [ count1 <i6> ] [ [ timeout1 <i7> ] [ usr-priority1 <i8> ] ] ] | pwwn <wwn9> vsan2 <i10> [ [ count2 <i11> ] [ [ timeout2 <i12> ] [ usr-priority2 <i13> ] ] ] }

Syntax Description

fcping

Ping an N-Port

device-alias

Device-alias of the destination N-Port

s0

Enter device-alias name

vsan

vsan id of the destination N Port.

i0

The VSAN Number.

count

(Optional) Number of frames to send. A value of 0 sends forever.

i1

(Optional) Frame count

timeout

(Optional) The timeout value.

i2

(Optional) Timeout in seconds

usr-priority

(Optional) The priority the frame receives in the switch fabric

i3

(Optional) User priority

fcid

FC-id of the destination N-Port

i4

The FC-id

vsan1

vsan id of the destination N Port.

i5

The VSAN number.

count1

(Optional) Number of frames to send. A value of 0 sends forever.

i6

(Optional) Frame count

timeout1

(Optional) The timeout value.

i7

(Optional) Timeout in seconds

usr-priority1

(Optional) The priority the frame receives in the switch fabric

i8

(Optional) User priority

pwwn

PWWN of the destination N-Port

wwn9

The Port WWN

vsan2

vsan id of the destination N Port.

i10

The VSAN Number.

count2

(Optional) Number of frames to send. A value of 0 sends forever.

i11

(Optional) Frame count

timeout2

(Optional) The timeout value.

i12

(Optional) Timeout in seconds

usr-priority2

(Optional) The priority the frame receives in the switch fabric

i13

(Optional) User priority

Command Mode

  • /exec

fcs plat-check-global vsan

[no] fcs plat-check-global vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

plat-check-global

Platform Name/Node Name checking to be done fabric-wide

vsan

VSAN id for plat checking

i0

VSAN number

Command Mode

  • /exec/configure

fcs register

[no] fcs register

Syntax Description

no

(Optional) Negate a command or set its defaults

register

Register FCS attributes

Command Mode

  • /exec/configure

fcs virtual-device-add

[no] fcs virtual-device-add [ vsan-ranges <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

virtual-device-add

Include Virtual devices in response

vsan-ranges

(Optional) VSAN Id

i0

(Optional) Enter upto 32 ranges of VSAN identifiers

Command Mode

  • /exec/configure

fctimer D_S_TOV

[no] fctimer D_S_TOV <i0> [ vsan <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

D_S_TOV

D_S_TOV in milliseconds(5000-10000)

i0

D_S_TOV in milliseconds(5000-10000)

vsan

(Optional) Specify VSAN id

i1

(Optional) VSAN id

Command Mode

  • /exec/configure

fctimer E_D_TOV

[no] fctimer E_D_TOV <i0> [ vsan <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

E_D_TOV

E_D_TOV in milliseconds(1000-4000)

i0

E_D_TOV in milliseconds(1000-4000)

vsan

(Optional) Specify VSAN id

i1

(Optional) VSAN id

Command Mode

  • /exec/configure

fctimer R_A_TOV

[no] fctimer R_A_TOV <i0> [ vsan <i1> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

R_A_TOV

R_A_TOV in milliseconds(5000-10000)

i0

R_A_TOV in milliseconds(5000-10000)

vsan

(Optional) Specify VSAN id

i1

(Optional) VSAN id

Command Mode

  • /exec/configure

fctimer abort

[no] fctimer abort

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

abort

abort the fctimer configuration commands

Command Mode

  • /exec/configure

fctimer commit

[no] fctimer commit

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

commit

commit the fctimer configuration commands

Command Mode

  • /exec/configure

fctimer distribute

[no] fctimer distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

fctimer

configure fibre channel timers

distribute

Enable distribution of fctimer configuration using CFS

Command Mode

  • /exec/configure

fctrace

fctrace { device-alias <s0> vsan <i0> [ timeout <i1> ] | fcid <fcid2> vsan1 <i3> [ timeout1 <i4> ] | pwwn <wwn5> vsan2 <i6> [ timeout2 <i7> ] }

Syntax Description

fctrace

Trace the route for an N-Port.

device-alias

Device-alias of the destination N-Port

s0

Enter device-alias name

vsan

vsan id of the destination N Port.

i0

The VSAN Number.

timeout

(Optional) The timeout value.

i1

(Optional) Timeout in seconds

fcid

FC-id of the destination N-Port

fcid2

The FC-id

vsan1

vsan id of the destination N Port.

i3

The VSAN Number.

timeout1

(Optional) The timeout value.

i4

(Optional) Timeout in seconds

pwwn

PWWN of the destination N-Port

wwn5

The Port WWN

vsan2

vsan id of the destination N Port.

i6

The VSAN Number.

timeout2

(Optional) The timeout value.

i7

(Optional) Timeout in seconds

Command Mode

  • /exec

fctrace module

[no] fctrace module { all | <i0> }

Syntax Description

no

Negate a command or set its defaults

fctrace

Trace the route for an N-Port.

module

Disable FCTrace on a specific module.

all

Disable FCTrace on all Gen-3 modules.

i0

Module Number on which FCTrace should be disabled.

Command Mode

  • /exec/configure

fdmi suppress-updates vsan

[no] fdmi suppress-updates vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

suppress-updates

suppress FDMIs updates

vsan

VSAN id

i0

VSAN id range

Command Mode

  • /exec/configure

feature-set

feature-set <fs>

Syntax Description

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

  • /exec/configure

feature-set

[no] feature-set <fs>

Syntax Description

no

Negate a command or set its defaults

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

  • /exec/configure

feature

[no] feature <arg1>

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Feature name

arg1

Enter feature name

Command Mode

  • /exec/configure/rolefeaturegrp

feature analytics

[no] feature analytics

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

analytics

Enable/Disable Analytics!!!

Command Mode

  • /exec/configure

feature app-hosting

[no] feature app-hosting

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

app-hosting

Enable/Disable app-hosting feature

Command Mode

  • /exec/configure

feature bash-shell

[no] feature bash-shell

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bash-shell

Enable/Disable bash-shell

Command Mode

  • /exec/configure

feature bfd

[no] feature bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bfd

bfd

Command Mode

  • /exec/configure

feature bgp

[no] feature bgp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bgp

Enable/Disable Border Gateway Protocol (BGP)

Command Mode

  • /exec/configure

feature container-tracker

[no] feature container-tracker

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

container-tracker

Enable/Disable NXOS Container Tracker

Command Mode

  • /exec/configure

feature cryptopqc

[no] feature cryptopqc

Syntax Description

no

(Optional) Negate a command or set its default

feature

Command to enable/disable features

cryptopqc

Enable/Disable CRYPTOPQC

Command Mode

  • /exec/configure

feature dhcp

[no] feature dhcp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

dhcp

Enable/Disable DHCP Manager

Command Mode

  • /exec/configure

feature dot1x

[no] feature dot1x

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

dot1x

Enable/Disable dot1x

Command Mode

  • /exec/configure

feature eigrp

[no] feature eigrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

eigrp

Enable/Disable Enhanced Interior Gateway Routing Protocol (EIGRP)

Command Mode

  • /exec/configure

feature epbr

[no] feature epbr

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

epbr

Enable/Disable Enhanced Policy Based Routing (EPBR)

Command Mode

  • /exec/configure

feature evb

[no] feature evb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evb

Enable/Disable Edge Virtual Bridge (EVB)

Command Mode

  • /exec/configure

feature evmed

[no] feature evmed

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evmed

Enable/Disable Generic event detectors

Command Mode

  • /exec/configure

feature fabric forwarding

[no] feature fabric forwarding

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

fabric

Enable/Disable Fabric Services

forwarding

Enable/Disable Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

  • /exec/configure

feature flexlink

[no] feature flexlink

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

flexlink

Enable/Disable Flexlink

Command Mode

  • /exec/configure

feature fport-channel-trunk

[no] feature fport-channel-trunk

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

fport-channel-trunk

Enable/Disable Trunking F Ports and channels

Command Mode

  • /exec/configure

feature frequency-synchronization

[no] feature frequency-synchronization

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

frequency-synchronization

Enable/Disable fsync

Command Mode

  • /exec/configure

feature grpc

[no] feature grpc

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

grpc

Enable/Disable grpc Services

Command Mode

  • /exec/configure

feature grpctunnel

[no] feature grpctunnel

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

grpctunnel

Enable/Disable grpc tunnel

Command Mode

  • /exec/configure

feature hardware-telemetry

[no] feature hardware-telemetry

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

hardware-telemetry

Enable/Disable Hardware Telemetry

Command Mode

  • /exec/configure

feature hsrp

[no] feature hsrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

hsrp

Enable/Disable Hot Standby Router Protocol (HSRP)

Command Mode

  • /exec/configure

feature imp

[no] feature imp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

imp

Enable/Disable IMP

Command Mode

  • /exec/configure

feature interface-vlan

[no] feature interface-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

interface-vlan

Enable/Disable interface vlan

Command Mode

  • /exec/configure

feature intersight

[no] feature intersight

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

intersight

Enable/Disable intersight feature

Command Mode

  • /exec/configure

feature isis

[no] feature isis

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

isis

Enable/Disable IS-IS Unicast Routing Protocol (IS-IS)

Command Mode

  • /exec/configure

feature itd

[no] feature itd

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

itd

Enable/Disable ITD

Command Mode

  • /exec/configure

feature lacp

[no] feature lacp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lacp

Enable/Disable LACP

Command Mode

  • /exec/configure

feature ldap

[no] feature ldap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ldap

Enable/Disable ldap

Command Mode

  • /exec/configure

feature lldp

[no] feature lldp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lldp

Enable/Disable LLDP

Command Mode

  • /exec/configure

feature macsec

[no] feature macsec

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

macsec

Enable/Disable CTS

Command Mode

  • /exec/configure

feature mdns

[no] feature mdns

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mdns

Enable/Disable MDNS Gateway

Command Mode

  • /exec/configure

feature mpls evpn

[no] feature mpls evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

evpn

Enable MPLS EVPN

Command Mode

  • /exec/configure

feature mpls l3vpn

[no] feature mpls l3vpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

l3vpn

Enable/Disable Layer 3 Virtual Private Networks

Command Mode

  • /exec/configure

feature mpls oam

[no] feature mpls oam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

oam

Enable MPLS OAM

Command Mode

  • /exec/configure

feature mpls segment-routing

[no] feature mpls segment-routing

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

segment-routing

Enable Segment-routing

Command Mode

  • /exec/configure

feature mpls segment-routing traffic-engineering

[no] feature mpls segment-routing traffic-engineering

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

segment-routing

Enable Segment-routing

traffic-engineering

Enable/Disable segment-routing traffic-engineering

Command Mode

  • /exec/configure

feature mpls static

[no] feature mpls static

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mpls

Enable/Disable MPLS Services

static

Enable/Disable Static Labeled Paths

Command Mode

  • /exec/configure

feature msdp

[no] feature msdp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

msdp

Enable/Disable Multicast Source Discovery Protocol (MSDP)

Command Mode

  • /exec/configure

feature mvpn

[no] feature mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

mvpn

Multicast Virtual Private Networks.

Command Mode

  • /exec/configure

feature nat

[no] feature nat

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nat

Enable/Disable NAT

Command Mode

  • /exec/configure

feature nbm

[no] feature nbm

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable a feature

nbm

Enable/Disable Non Blocking Multicast (NBM) feature

Command Mode

  • /exec/configure

feature netconf

[no] feature netconf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

netconf

Enable/Disable netconf Services

Command Mode

  • /exec/configure

feature netflow

[no] feature netflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

netflow

Enable/Disable NetFlow

Command Mode

  • /exec/configure

feature ngmvpn

[no] feature ngmvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngmvpn

Enable/Disable EVPN/MVPN features

Command Mode

  • /exec/configure

feature ngoam

[no] feature ngoam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngoam

Enable/Disable ngoam

Command Mode

  • /exec/configure

feature ngoam

[no] feature ngoam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngoam

Enable/Disable ngoam

Command Mode

  • /exec/configure

feature npiv

[no] feature npiv

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

Command Mode

  • /exec/configure

feature npiv

[no] feature npiv

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

npiv

Enable/Disable Nx port Id Virtualization (NPIV)

Command Mode

  • /exec/configure

feature ntp

[no] feature ntp

Syntax Description

no

(Optional) Negate a command or set its default

feature

Command to enable/disable features

ntp

Enable/Disable NTP

Command Mode

  • /exec/configure

feature nv overlay

[no] feature nv overlay

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nv

Enable/Disable VxLAN

overlay

Enable/Disable VxLAN

Command Mode

  • /exec/configure

feature nxapi

[no] feature nxapi

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxapi

Enable/Disable nxapi

Command Mode

  • /exec/configure

feature nxsdk

[no] feature nxsdk

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxsdk

Enable/Disable nxsdk Services

Command Mode

  • /exec/configure

feature ofm

[no] feature ofm

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ofm

Enable/Disable OFM

Command Mode

  • /exec/configure

feature openconfig

[no] feature openconfig

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

openconfig

Enable/Disable OpenConfig models

Command Mode

  • /exec/configure

feature ospf

[no] feature ospf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospf

Enable/Disable Open Shortest Path First Protocol (OSPF)

Command Mode

  • /exec/configure

feature ospfv3

[no] feature ospfv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospfv3

Enable/Disable Open Shortest Path First Version 3 Protocol (OSPFv3)

Command Mode

  • /exec/configure

feature password encryption aes

[no] feature password encryption aes [ tam ]

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Enable the feature

password

Credential(s) for the user(s)/device(s)

encryption

Strong encryption for credential(s)

aes

Encrypt using AES encryption standard

tam

(Optional) Encrypt type-6 master-key using hardware Trust Anchor Module(TAM)

Command Mode

  • /exec/configure

feature pbr

[no] feature pbr

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pbr

Enable/Disable Policy Based Routing(PBR)

Command Mode

  • /exec/configure

feature pim

[no] feature pim

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim

Enable/Disable Protocol Independent Multicast (PIM)

Command Mode

  • /exec/configure

feature pim6

[no] feature pim6

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim6

Enable/Disable Protocol Independent Multicast (PIM) for IPv6

Command Mode

  • /exec/configure

feature pnp

[no] feature pnp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pnp

Enable/Disable PNP

Command Mode

  • /exec/configure

feature poap

[no] feature poap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

poap

Enable/Disable POAP

Command Mode

  • /exec/configure

feature poe

[no] feature poe

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable a feature

poe

Enable/Disable Power over Ethernet(PoE) feature

Command Mode

  • /exec/configure

feature pong

[no] feature pong

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pong

Enable/Disable Pong

Command Mode

  • /exec/configure

feature port-security

[no] feature port-security

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable eth port security features

port-security

Enable/Disable port-security

Command Mode

  • /exec/configure

feature private-vlan

[no] feature private-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

private-vlan

Enable/Disable private-vlan

Command Mode

  • /exec/configure

feature ptp

[no] feature ptp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ptp

Enable/Disable PTP

Command Mode

  • /exec/configure

feature restconf

[no] feature restconf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

restconf

Enable/Disable restconf Services

Command Mode

  • /exec/configure

feature rip

[no] feature rip

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

rip

Enable/Disable Routing Information Protocol (RIP)

Command Mode

  • /exec/configure

feature scheduler

[no] feature scheduler

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scheduler

Enable/Disable scheduler

Command Mode

  • /exec/configure

feature scp-server

[no] feature scp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scp-server

Enable/Disable SCP server

Command Mode

  • /exec/configure

feature sflow

[no] feature sflow

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sflow

Enable/Disable sFlow agent

Command Mode

  • /exec/configure

feature sftp-server

[no] feature sftp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sftp-server

Enable/Disable SFTP server

Command Mode

  • /exec/configure

feature signature-verification

[no] feature signature-verification

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

signature-verification

Enable image signature verification

Command Mode

  • /exec/configure

feature sla responder

[no] feature sla responder

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sla

Enable/Disable SLA

responder

Enable/Disable responder part of SLA

Command Mode

  • /exec/configure

feature sla sender

[no] feature sla sender

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sla

Enable/Disable SLA

sender

Enable/Disable sender part of SLA

Command Mode

  • /exec/configure

feature sla twamp-server

[no] feature sla twamp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sla

Enable/Disable SLA

twamp-server

Enable/Disable twamp-server part of SLA

Command Mode

  • /exec/configure

feature srv6

[no] feature srv6

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

srv6

Enable/Disable SRv6

Command Mode

  • /exec/configure

feature ssh

[no] feature ssh

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ssh

Enable/Disable ssh

Command Mode

  • /exec/configure

feature tacacs

[no] feature tacacs +

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

Command Mode

  • /exec/configure

feature tap-aggregation

[no] feature tap-aggregation

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable a feature

tap-aggregation

Enable/Disable feature tap-aggregation

Command Mode

  • /exec/configure

feature telemetry

[no] feature telemetry

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telemetry

Enable/Disable Telemetry

Command Mode

  • /exec/configure

feature telnet

[no] feature telnet

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telnet

Enable/Disable telnet

Command Mode

  • /exec/configure

feature tunnel-encryption

[no] feature tunnel-encryption

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

tunnel-encryption

Enable/Disable Tunnel Encryptiontunnel-encryption

Command Mode

  • /exec/configure

feature tunnel

[no] feature tunnel

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

tunnel

Enable/Disable Tunnel Manager

Command Mode

  • /exec/configure

feature udld

[no] feature udld

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

udld

Enable/Disable UDLD

Command Mode

  • /exec/configure

feature vmtracker

[no] feature vmtracker

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vmtracker

Enable/Disable VM Tracker feature

Command Mode

  • /exec/configure

feature vn-segment-vlan-based

[no] feature vn-segment-vlan-based

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vn-segment-vlan-based

Enable/Disable VLAN based VN segment

Command Mode

  • /exec/configure

feature vpc

[no] feature vpc

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vpc

Enable/Disable VPC (Virtual Port Channel)

Command Mode

  • /exec/configure

feature vrrp

[no] feature vrrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vrrp

Enable/Disable Virtual Router Redundancy Protocol (VRRP)

Command Mode

  • /exec/configure

feature vrrpv3

[no] feature vrrpv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vrrpv3

Enable/Disable Virtual Router Redundancy Protocol (VRRP) version 3

Command Mode

  • /exec/configure

feature vtp

[no] feature vtp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vtp

Enable/Disable VTP

Command Mode

  • /exec/configure

fec

fec <fec_val> | no fec [ <fec_val> ]

Syntax Description

no

Negate a command or set its defaults

fec

Forwarding error correction

fec_val

Interface FEC options

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

fhrp delay minimum

[no] fhrp delay minimum | fhrp delay minimum <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

minimum

minimum delay

delay

Seconds to delay

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan

fhrp delay reload

[no] fhrp delay reload | fhrp delay reload <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

reload

reload delay

delay

Seconds to delay

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan

file-server

[no] file-server <port>

Syntax Description

no

(Optional) Negate a command or set its defaults

file-server

Hosts a file-server to a particular directory

port

Port number. Please do not use well-known protocol ports

Command Mode

  • /exec/configure

filter

[no] filter [ subject-name <s0> | altname-email <s1> | altname-upn <s2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Configure mapping filter

subject-name

(Optional) Subject name of the certificate

s0

(Optional) Subject name or CN=<subject-common-name-without-spaces>

altname-email

(Optional) Email id as an alternate name

s1

(Optional) Email id

altname-upn

(Optional) User principal name as an alternate name

s2

(Optional) User principal name

Command Mode

  • /exec/configure/certmap-filter

filter

[no] filter <filtername>

Syntax Description

filter

Specify the filter to be applied

filtername

filter name to be applied

Command Mode

  • /exec/configure/analytics/system

filter

[no] filter <filtername>

Syntax Description

filter

Specify the filter to be applied

filtername

filter name to be applied

Command Mode

  • /exec/configure/nfm-system

filter access-group

[no] filter access-group <vacl-name> [ allow-sharing ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

access-group

access control group

vacl-name

List name

allow-sharing

(Optional) allow up to 4 access control groups on same source interface

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter export-interval

{ [ no ] filter export-interval <interval> | no filter export-interval }

Syntax Description

filter

Traffic-analytics troubleshoot flows

export-interval

Specify the interval for export of traffic analytics troubleshoot flows

interval

Time in seconds

Command Mode

  • /exec/configure/analytics/traffic-analytics

filter file

filter file { <file-name> | parser-v1.0.json } [ md5 <md5-hash-value> ] | no filter

Syntax Description

no

Negate a command or set its defaults

filter

Specify filter

file

Filename

md5

(Optional) md5 hash value

file-name

filter filename

parser-v1.0.json

Data filtering and transformation input file. version 1.0

md5-hash-value

(Optional) md5 hash value (32 characters) associated with this filter

Command Mode

  • /exec/configure/telemetry/destination-group

filter ip

[no] filter ip <src_ip> <src_mask> <dst_ip> <dst_mask>

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Set SPAN filter options

ip

Set SPAN IP filtering options

src_ip

Set source IP address

src_mask

Set source IP mask

dst_ip

Set destination IP address

dst_mask

Set destination IP mask

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter ip access-list

[no] filter ip access-list <aclname>

Syntax Description

filter

Filter configuration

ip

IPv4 Filter

access-list

access-list

aclname

access control list name

Command Mode

  • /exec/configure/config-buffer-drop-monitor

filter ip access-list

[no] filter ip access-list <aclname>

Syntax Description

filter

Filter configuration

ip

IPv4 Filter

access-list

access-list

aclname

access control list name

Command Mode

  • /exec/configure/config-buffer-latency-monitor

filter ip access-list

[no] filter ip access-list <aclname>

Syntax Description

filter

Filter configuration

ip

IPv4 Filter

access-list

access-list

aclname

access control list name

Command Mode

  • /exec/configure/config-int-clone-md-source-monitor

filter ipv6 access-group

[no] filter ipv6 access-group <vacl-name> [ allow-sharing ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

ipv6

ipv6 access group

access-group

access control group

vacl-name

List name

allow-sharing

(Optional) allow up to 4 access control groups on same source interface

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter ipv6 access-list

[no] filter ipv6 access-list <aclname>

Syntax Description

filter

Filter configuration

ipv6

IPv6 Filter

access-list

access-list

aclname

IPv6 access control list name

Command Mode

  • /exec/configure/config-buffer-latency-monitor

filter ipv6 access-list

[no] filter ipv6 access-list <aclname>

Syntax Description

filter

Filter configuration

ipv6

IPv6 Filter

access-list

access-list

aclname

IPv6 access control list name

Command Mode

  • /exec/configure/config-int-clone-md-source-monitor

filter ipv6 access-list

[no] filter ipv6 access-list <aclname>

Syntax Description

filter

Filter configuration

ipv6

IPv6 Filter

access-list

access-list

aclname

IPv6 access control list name

Command Mode

  • /exec/configure/config-buffer-drop-monitor

filter out

[ no | default ] { filter-list <fltrlist-name> } { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

filter-list

Apply AS-PATH filter-list

fltrlist-name

Name of filter-list

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

filter tx control-packets

[no] filter tx control-packets

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Set SPAN filter options

tx

Set SPAN tx filtering options

control-packets

Filter out CPU generated packets and SPAN only data packets

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter vlan

[no] filter vlan <vlan_mrange> [ include-untagged ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

vlan

Vlan type

vlan_mrange

include-untagged

(Optional) Include untagged frames on port with Layer 3 subinterfaces

Command Mode

  • /exec/configure/monitor-local-src /exec/configure/config-monitor /exec/configure/config-monitor-erspan-src

filter vlan include-untagged

[no] filter vlan include-untagged

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Filter configuration

vlan

Vlan type

include-untagged

Include untagged frames on port with Layer 3 subinterfaces

Command Mode

  • /exec/configure/config-monitor

find

find <s0>

Syntax Description

find

Find a file below the current directory

s0

Enter the filename prefix to search

Command Mode

  • /exec

fips mode enable

[no] fips mode enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

mode

FIPS mode

enable

Enable/Disable FIPS mode

Command Mode

  • /exec/configure

flow-count

[no] flow-count <count>

Syntax Description

flow-count

Flow count throttle for drop events

count

<1-32767>

Command Mode

  • /exec/configure/config-fte-event/group-latency-events

flow-count

[no] flow-count <count>

Syntax Description

flow-count

Flow count throttle for drop events

count

<1-32767>

Command Mode

  • /exec/configure/config-fte-event/group-drop-events

flow-path-tracer

flow-path-tracer

Syntax Description

flow-path-tracer

Enable Flow Path Tracer

Command Mode

  • /exec

flow collect tunnel-header

[no] flow collect tunnel-header

Syntax Description

flow

Netflow

collect

Enable collection

tunnel-header

Collect header data for tunneled packets

Command Mode

  • /exec/configure

flow collect tunnel-header

[no] flow collect tunnel-header

Syntax Description

flow

Analytics

collect

Enable collection

tunnel-header

Collect header data for tunneled packets

Command Mode

  • /exec/configure/analytics

flow collect tunnel-header

[no] flow collect tunnel-header

Syntax Description

flow

Analytics

collect

Enable collection

tunnel-header

Collect header data for tunneled packets

Command Mode

  • /exec/configure

flow event

[no] flow event <eventname>

Syntax Description

flow

Enable/Disable Analytics configuration

event

Define a event

eventname

Event name

Command Mode

  • /exec/configure

flow event

[no] flow event <eventname>

Syntax Description

flow

Enable/Disable Analytics configuration

event

Define a event

eventname

Event name

Command Mode

  • /exec/configure/analytics

flow exporter

[no] flow exporter <exportername>

Syntax Description

flow

Enable/Disable NetFlow configuration

exporter

Define a Flow Exporter

exportername

Name of Flow Exporter

Command Mode

  • /exec/configure

flow exporter

[no] flow exporter <exportername>

Syntax Description

flow

Enable/Disable Mixed Mode Analytics configuration

exporter

Define a Flow Exporter

exportername

Name of Flow Exporter

Command Mode

  • /exec/configure/analytics

flow exporter

[no] flow exporter <exportername>

Syntax Description

flow

Enable/Disable Analytics configuration

exporter

Define a Flow Exporter

exportername

Name of Flow Exporter

Command Mode

  • /exec/configure

flow filter

[no] flow filter <filtername>

Syntax Description

flow

Analytics related commands

filter

Apply a Analytics Filter to this interface

filtername

Name of Flow Filter

Command Mode

  • /exec/configure/if-vlan /exec/configure/if-eth-port-channel /exec/configure/if-igp /exec/configure/if-eth-base

flow filter

[no] flow filter <filtername>

Syntax Description

flow

Enable/Disable Analytics configuration

filter

Define a Flow filter

filtername

Filter name

Command Mode

  • /exec/configure

flow filter

[no] flow filter <filtername>

Syntax Description

flow

NetFlow related commands

filter

Apply a Flow Filter to this VRF

filtername

Name of Flow Filter

Command Mode

  • /exec/configure/vrf

flow filter

[no] flow filter <filtername>

Syntax Description

flow

Analytics related commands

filter

Apply a Analytics Filter to this interface

filtername

Name of Flow Filter

Command Mode

  • /exec/configure/vlan-config

flow filter

[no] flow filter <filtername>

Syntax Description

flow

Enable/Disable Analytics configuration

filter

Define a Flow filter

filtername

Filter name

Command Mode

  • /exec/configure

flow filter

[no] flow filter <filtername>

Syntax Description

flow

NetFlow related commands

filter

Apply a Flow Filter to this VRF

filtername

Name of Flow Filter

Command Mode

  • /exec/configure/vrf

flow filter

[no] flow filter <filtername>

Syntax Description

flow

Analytics related commands

filter

Apply a Analytics Filter to this interface

filtername

Name of Flow Filter

Command Mode

  • /exec/configure/if-vlan /exec/configure/if-eth-port-channel /exec/configure/if-igp

flow filter

[no] flow filter <filtername>

Syntax Description

flow

Analytics related commands

filter

Apply a Analytics Filter to this interface

filtername

Name of Flow Filter

Command Mode

  • /exec/configure/vlan-config

flow monitor

[no] flow monitor <monitorname>

Syntax Description

flow

Enable/Disable analytics configuration

monitor

Define a Flow Monitor

monitorname

Name of Flow Monitor

Command Mode

  • /exec/configure

flow monitor

[no] flow monitor <monitorname>

Syntax Description

flow

Enable/Disable NetFlow configuration

monitor

Define a Flow Monitor

monitorname

Name of Flow Monitor

Command Mode

  • /exec/configure

flow monitor

[no] flow monitor <monitorname>

Syntax Description

flow

Enable/Disable analytics configuration

monitor

Define a Flow Monitor

monitorname

Name of Flow Monitor

Command Mode

  • /exec/configure/analytics

flow policy

[no] flow { policy <policy-name> } [ { vlan <vlans> } { match [ ipv4-acl <ipv4-acl-name> ] [ ipv6-acl <ipv6-acl-name> ] [ mac-acl <mac-acl-name> ] [ direction <direction> ] [ next-hop-vrf { <nh-vrf-name> | default } ] } { redirect vtep-ip <next-hop> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

flow

Flow management

policy

specify policy name

policy-name

Flow Policy name

vlan

(Optional) apply to vlan

vlans

(Optional) List of VLANs

match

(Optional) match criteria

ipv4-acl

(Optional) specify ipv4-acl

ipv4-acl-name

(Optional) IPv4-ACL name

ipv6-acl

(Optional) specify ipv6-acl

ipv6-acl-name

(Optional) IPv6-ACL name

mac-acl

(Optional) specify mac-acl

mac-acl-name

(Optional) mac-ACL name

direction

(Optional) specify policy direction

direction

(Optional) direction of access or core

next-hop-vrf

(Optional) specify nexthop vrf

default

(Optional) Default next hop VRF

nh-vrf-name

(Optional) VRF name

redirect

(Optional) specify redirect

vtep-ip

(Optional) specify vtep-ip

next-hop

(Optional) IP next-hop address in format i.i.i.i

Command Mode

  • /exec/configure/tunnel-profile

flow profile

[no] flow profile <profilename>

Syntax Description

flow

Enable/Disable Analytics configuration

profile

Define a Flow Profile

profilename

Profile name

Command Mode

  • /exec/configure/analytics

flow profile

[no] flow profile <profilename>

Syntax Description

flow

Enable/Disable Analytics configuration

profile

Define a Flow Profile

profilename

Profile name

Command Mode

  • /exec/configure

flow record

[no] flow record <recordname>

Syntax Description

flow

Enable/Disable analytics configuration

record

Define a Flow Record

recordname

Record name

Command Mode

  • /exec/configure

flow record

[no] flow record <recordname>

Syntax Description

flow

Enable/Disable NetFlow configuration

record

Define a Flow Record

recordname

Record name

Command Mode

  • /exec/configure

flow record

[no] flow record <recordname>

Syntax Description

flow

Enable/Disable analytics configuration

record

Define a Flow Record

recordname

Record name

Command Mode

  • /exec/configure/analytics

flow rtp history

{ [ no ] flow rtp history <size> | no flow rtp history }

Syntax Description

flow

Enable/Disable NetFlow configuration

rtp

Real-time Transport Protocol

history

Define RTP Flow Error history size

size

# of records to retain in history. 0 to discard to not maintain any history.

Command Mode

  • /exec/configure

flow rtp timeout

{ [ no ] flow rtp timeout <time> | no flow rtp timeout }

Syntax Description

flow

Enable/Disable NetFlow configuration

rtp

Real-time Transport Protocol

timeout

Define RTP Flow Error Monitoring Duration

time

Time in Minutes. Enter 0 to keep the flows even if they are idle

Command Mode

  • /exec/configure

flow system config

[no] flow system config

Syntax Description

flow

Enable/Disable Analytics configuration

system

Define a Flow system

config

Define a Flow system config

Command Mode

  • /exec/configure/analytics

flow system config

[no] flow system config

Syntax Description

flow

Enable/Disable Analytics configuration

system

Define a Flow system

config

Define a Flow system config

Command Mode

  • /exec/configure

flow terminate interface

flow terminate interface { <interface-list> | add <add-interface-list> | remove <remove-interface-list> } | no flow terminate interface

Syntax Description

no

Negate a command or set its defaults

flow

Flow management

interface

list of interfaces

interface-list

range of interfaces for flow information

add

list of new interfaces to append to old list

add-interface-list

range of interfaces to be added for flow information

remove

list of interfaces to be removed from the existing list

remove-interface-list

range of interfaces to be removed for flow information

terminate

terminate the tunnel on the interfaces

Command Mode

  • /exec/configure/tunnel-profile

flow timeout

{ [ no ] flow timeout <time> | no flow timeout }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

time

Time in seconds (flush-cache-Only)

Command Mode

  • /exec/configure

flow timeout

{ [ no ] flow timeout <time> | no flow timeout }

Syntax Description

flow

Enable/Disable analytics configuration

timeout

Define a Flow Timeout

time

Time in seconds (flush-cache-Only)

Command Mode

  • /exec/configure

flow traffic-analytics

[no] flow traffic-analytics

Syntax Description

flow

Enable/Disable Analytics configuration

traffic-analytics

Define traffic-analytics

Command Mode

  • /exec/configure/analytics

flowcontrol hardware

[no] flowcontrol hardware

Syntax Description

no

(Optional) Negate a command or set its defaults

flowcontrol

Set flow control

hardware

Set hardware flowcontrol

Command Mode

  • /exec/configure/com1

flowcontrol receive

flowcontrol { receive { <rx_flowctrl> } | send { <tx_flowctrl> } } | no flowcontrol { receive [ { <rx_flowctrl> } ] | send [ { <tx_flowctrl> } ] }

Syntax Description

no

Negate a command or set its defaults

flowcontrol

Configure interface flowcontrol

receive

Receive pause frames

rx_flowctrl

Receive flow control

send

Send pause frames

tx_flowctrl

Send flow control

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

flowlet-aging

flowlet-aging <usec> | no flowlet-aging

Syntax Description

no

Negate a command or set its defaults

flowlet-aging

Aging Period in usec

usec

Aging Period in usec

Command Mode

  • /exec/configure/dyn-loadbalancing

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on non-graceful controlled restart

Command Mode

  • /exec/configure/router-isis

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

  • /exec/configure/router-rip

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

  • /exec/configure/router-ospf3

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

  • /exec/configure/router-eigrp

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

  • /exec/configure/router-ospf

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB upon controlled restart

Command Mode

  • /exec/configure/router-bgp

follow

follow <name> | no follow

Syntax Description

no

Negate a command or set its defaults

follow

Group to be followed

name

master name string to follow

Command Mode

  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

format

format <uri1>

Syntax Description

format

Format disks

uri1

destination filesystem path

Command Mode

  • /exec

format bootflash

format bootflash:

Syntax Description

format

Format disks

bootflash:

Format bootflash:

Command Mode

  • /exec

format bootflash check-filesystem

format bootflash: check-filesystem

Syntax Description

format

Format disks

bootflash:

Format bootflash:

check-filesystem

Format bootflash: and fix any errors in file system

Command Mode

  • /exec

format usb1

format usb1:

Syntax Description

format

Format disks

usb1:

Format usb1:

Command Mode

  • /exec

forward

[no] forward

Syntax Description

no

(Optional) Negate a command or set its defaults

forward

Configure paths

Command Mode

  • /exec/configure/mpls_static/ipv4/lsp/inlabel

fragments

[no] fragments <opt_type>

Syntax Description

no

(Optional) Negate a command or set its defaults

opt_type

frag_op_type

Command Mode

  • /exec/configure/ipacl /exec/configure/ipv6acl

frequency

[no] frequency <freq-num>

Syntax Description

no

(Optional) Negate a command or set its defaults

frequency

Frequency interval to measure the SHM usage

freq-num

multiples of 500 ms interval

Command Mode

  • /exec/configure/lpss-shm-mon

frequency

{ { no | default } frequency | frequency <seconds> }

Syntax Description

no

default

Set a command to its defaults

frequency

Frequency of an operation

seconds

Frequency in seconds

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

frequency milliseconds

frequency milliseconds <milliseconds>

Syntax Description

frequency

Frequency of an operation

milliseconds

Frequency will be taken as milliseconds

milliseconds

Frequency in milliseconds

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

frequency synchronization

[no] frequency synchronization

Syntax Description

no

(Optional) Negate a command or set its defaults

frequency

Frequency Synchronization Manager

synchronization

Frequency Synchronization Manager

Command Mode

  • /exec/configure/clock-if

frequency synchronization

[no] frequency synchronization

Syntax Description

no

(Optional) Negate a command or set its defaults

frequency

Frequency Synchronization Manager

synchronization

Frequency Synchronization Manager

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

frequency synchronization

[no] frequency synchronization

Syntax Description

no

(Optional) Negate a command or set its defaults

frequency

Frequency Synchronization Manager

synchronization

Frequency Synchronization Manager

Command Mode

  • /exec/configure/gnss-if

from to

[no] { { from <frm-list> to <to-val> } | { default { <value> | copy | ignore } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

ignore

Ignore any unspecified values

Command Mode

  • /exec/configure/table-map

from to

{ [ no ] { { from <frm-list> to <to-val> } | { default <value> } } } | default copy

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

Command Mode

  • /exec/configure/def-tmap

fspf

[no] fspf { cost <i0> vsan <i1> | dead-interval <i2> vsan1 <i3> | hello-interval <i4> vsan2 <i5> | passive vsan3 <i6> | retransmit-interval <i7> vsan4 <i8> }

Syntax Description

no

(Optional) Negate a command or set its defaults

cost

Configure FSPF link cost

i0

FSPF link cost

vsan

Enter VSAN

i1

VSAN id range

dead-interval

Configure FSPF dead interval

i2

dead interval (in sec)

vsan1

Enter VSAN

i3

VSAN id range

hello-interval

Configure FSPF hello-interval

i4

hello interval (in sec)

vsan2

Enter VSAN

i5

VSAN id range

passive

Enable/disable FSPF on the interface

vsan3

Enter VSAN

i6

VSAN id range

retransmit-interval

Configure FSPF retransmit interval

i7

retransmit interval (in sec)

vsan4

Enter VSAN

i8

VSAN id range

Command Mode

  • /exec/configure/if-fc /exec/configure/if-san-port-channel /exec/configure/if-fcip /exec/configure/if-bay /exec/configure/if-ext /exec/configure/if-vfc

fspf config vsan

[no] fspf config vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

config

Enter the FSPF config mode

vsan

Enter VSAN

i0

VSAN id range

Command Mode

  • /exec/configure

fspf enable vsan

[no] fspf enable vsan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

enable

Enable/disable FSPF

vsan

Enter VSAN

i0

VSAN id range

Command Mode

  • /exec/configure

fsync clock-identity

fsync clock-identity <mac-address> | no fsync clock-identity

Syntax Description

fsync

Frequency Synchronization Manager

clock-identity

clock-identity

mac-address

Mac Address

Command Mode

  • /exec/configure

fsync esmc peer receive timeout

fsync esmc peer receive timeout { 0 | <value> } | no fsync esmc peer receive timeout [ [ 0 | <value> ] ]

Syntax Description

no

Negate a command or set its defaults

fsync

Frequency Synchronization Manager

esmc

Ethernet Synchronization Messaging Channel

peer

peer ESMC

receive

receive timer to be configured during upgrade

timeout

ESMC recv timeout value in secs

0

0 disables modify peer esmc recv timer

value

ESMC recv timeout in secs. Enter a value between 120 and 600

Command Mode

  • /exec/configure

fsync quality itu-t option

[no] fsync quality itu-t option { 1 | 2 generation { 1 | 2 } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fsync

Frequency Synchronization Manager

quality

ITU-T QL options

itu-t

ITU-T QL options

option

ITU-T QL options

1

ITU-T QL option 1 (default)

2

ITU-T QL option 2

generation

ITU-T QL option 2 generation

1

ITU-T QL option 2 generation 1

2

ITU-T QL option 2 generation 2

Command Mode

  • /exec/configure

fsync transmit dnu lag-members

[no] fsync transmit dnu lag-members

Syntax Description

no

(Optional) Negate a command or set its defaults

fsync

Frequency Synchronization Manager

transmit

transmit

dnu

DNU QL type

lag-members

members of link aggregation or PO

Command Mode

  • /exec/configure

fte event

[no] fte event <eventname>

Syntax Description

fte

Enable/Disable FTE configuration

event

Define a FTE event

eventname

Event name

Command Mode

  • /exec/configure/config-fte

fte exporter

[no] fte exporter <exportername>

Syntax Description

fte

Enable/Disable Flow Table Events configuration

exporter

Define a events Exporter

exportername

Name of event Exporter

Command Mode

  • /exec/configure/config-fte

fte monitor

[no] fte monitor <monitorname>

Syntax Description

fte

Enable/Disable FTE configuration

monitor

Define a FTE Monitor

monitorname

Name of FTE Monitor

Command Mode

  • /exec/configure/config-fte

fte record

[no] fte record <recordname>

Syntax Description

fte

Enable/Disable FTE configuration

record

Define a FTE Record

recordname

Record name

Command Mode

  • /exec/configure/config-fte

fte system monitor

[no] fte system monitor <monitorname>

Syntax Description

fte

change fte global settings

system

global config

monitor

fte Monitor to be applied

monitorname

fte Monitor to be applied

Command Mode

  • /exec/configure/config-fte

ftrace

ftrace [ { set-opt { option <n0> <v0> | filter <f0> <v0> } { proc <p0> | buf_size <b0> } [ <s0> ] } | { reset { all | filter <f0> | trace | <s0> } } | { enable { inband | kernel | lcnd <i0> | process <i0> | trace } } | { list { filters <f0> | curr_tracer | all } } | { debug { on | off } } | { dump { all | traces } } ]

Syntax Description

ftrace

Run ftrace tool to enable/disable kernel/process tracing

set-opt

(Optional) Set ftrace tracing options available

reset

(Optional) Reset ftrace options to defaults, disable tracing

enable

(Optional) Enable ftrace tracing with given options

list

(Optional) List ftrace available options/filters/events

debug

(Optional) Ftrace based debug trace enable/disable

dump

(Optional) Dump traces collected in ftrace circular buffer

all

(Optional) Act on all available datasets

lcnd

(Optional) Trace proc/pid specific lcnd inband driver calls

inband

(Optional) Trace inband driver + netstack functions

kernel

(Optional) Trace kernel function of sched, net, inband

process

(Optional) Trace proc/pid specific kernel function calls

trace

(Optional) Enable tracing_on in ftrace settings

option

(Optional) Name of ftrace option to be set

filter

(Optional) Set ftrace filter to be applied

proc

(Optional) Set ftrace process to be traced

buf_size

(Optional) Set ftrace buffer size limits

filters

(Optional) list available ftrace filters

curr_tracer

(Optional) Print ftrace current tracer

traces

(Optional) Dump ftrace trace buffer contents

on

(Optional) Enable ftrace based debug tracing

off

(Optional) Dump ftrace trace buffer contents

i0

(Optional) pid of process to trace

f0

(Optional) name of ftrace filter to list/set

n0

(Optional) name of ftrace option to be set

v0

(Optional) value of ftrace option/filter to be set

p0

(Optional) pid of ftrace proc to be set

b0

(Optional) value of ftrace buffer size limit to set

s0

(Optional) name of ftrace option to be set/reset

Command Mode

  • /exec