H Commands

ha-policy single

ha-policy { single-sup <hap-change> | dual-sup <sw-change> } +

Syntax Description

ha-policy

Change HA policy for this VDC

hap-change

Change HA policy for this VDC

single-sup

Change HA policy for this VDC for single-sup situations

dual-sup

Change HA policy for this VDC for dual-sup situations

sw-change

Set hap policy

Command Mode

  • /exec/configure/vdc

hardware-telemetry buffer-drop

[no] hardware-telemetry buffer-drop

Syntax Description

hardware-telemetry

Hardware telemetry configuration

buffer-drop

Enable/Disable buffer drop configuration

Command Mode

  • /exec/configure

hardware-telemetry buffer-latency

[no] hardware-telemetry buffer-latency

Syntax Description

hardware-telemetry

Hardware telemetry configuration

buffer-latency

Enable/Disable Buffer Latency configuration

Command Mode

  • /exec/configure

hardware-telemetry inband-telemetry

[no] hardware-telemetry inband-telemetry

Syntax Description

hardware-telemetry

Hardware telemetry configuration

inband-telemetry

Enable/Disable inband telemetry configuration

Command Mode

  • /exec/configure

hardware-telemetry int-clone-md

[no] hardware-telemetry int-clone-md

Syntax Description

hardware-telemetry

Hardware telemetry configuration

int-clone-md

Enable/Disable INT Clone MD configuration

Command Mode

  • /exec/configure

hardware-telemetry postcard-telemetry

[no] hardware-telemetry postcard-telemetry

Syntax Description

hardware-telemetry

Hardware telemetry configuration

postcard-telemetry

Enable/Disable postcard telemetry configuration

Command Mode

  • /exec/configure

hardware-telemetry ssx

[no] hardware-telemetry ssx

Syntax Description

hardware-telemetry

Hardware Telemetry Configurations

ssx

enable Streaming Statistics Exporter Configurations

Command Mode

  • /exec/configure

hardware N2232P slow-port-error-disable-time

hardware N2232P slow-port-error-disable-time <val> | no hardware N2232P slow-port-error-disable-time

Syntax Description

no

Negate the command

hardware

FEX Card type

slow-port-error-disable-time

Slow port error-disable time

N2232P

Fabric Extender 32x10G SFP+ 8x10G SFP+ Module

val

Error-disable time in ms

Command Mode

  • /exec/configure/fex handle auto 190

hardware N2232TM-E slow-port-error-disable-time

hardware N2232TM-E slow-port-error-disable-time <val> | no hardware N2232TM-E slow-port-error-disable-time

Syntax Description

no

Negate the command

hardware

FEX Card type

slow-port-error-disable-time

Slow port error-disable time

N2232TM-E

Fabric Extender 32x10GBase-T 8x10GBase SFP+ with bcom phy

val

Error-disable time in ms

Command Mode

  • /exec/configure/fex handle auto 190

hardware UCS2204XP slow-port-error-disable-time

hardware UCS2204XP slow-port-error-disable-time <val> | no hardware UCS2204XP slow-port-error-disable-time

Syntax Description

no

Negate the command

hardware

FEX Card type

slow-port-error-disable-time

Slow port error-disable time

UCS2204XP

UCS IOM 4 ports

val

Error-disable time in ms

Command Mode

  • /exec/configure/fex handle auto 190

hardware UCS2208XP slow-port-error-disable-time

hardware UCS2208XP slow-port-error-disable-time <val> | no hardware UCS2208XP slow-port-error-disable-time

Syntax Description

no

Negate the command

hardware

FEX Card type

slow-port-error-disable-time

Slow port error-disable time

UCS2208XP

UCS IOM 8 ports

val

Error-disable time in ms

Command Mode

  • /exec/configure/fex handle auto 190

hardware access-list lou resource threshold

[no] hardware access-list lou resource threshold <threshold>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

lou

LOU

resource

hardware resource

threshold

port expansion threshold

threshold

value of threshold

Command Mode

  • /exec/configure

hardware access-list match inner-header

[no] hardware access-list match inner-header

Syntax Description

no

(Optional) Negate the command or set its defaults

hardware

Change hardware usage settings

access-list

Access Control List

match

Match criteria in ACL

inner-header

Match inner header fields in IPinIP/GRE packets

Command Mode

  • /exec/configure

hardware access-list tcam label egr-l2-qos 6

[no] hardware access-list tcam label egr-l2-qos 6

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

label

Tcam entry label info

egr-l2-qos

Egress L2 qos region

6

Size in bits for IFACL-Labels allocated to Egress L2 QOS region

Command Mode

  • /exec/configure

hardware access-list tcam label ing-ifacl 6

[no] hardware access-list tcam label ing-ifacl 6

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

label

Tcam entry label info

ing-ifacl

Ingress PACL region

6

Size in bits for IFACL-Labels allocated to Ingress PACL region

Command Mode

  • /exec/configure

hardware access-list tcam label ing-qos optimize

[no] hardware access-list tcam label ing-qos optimize

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

label

Tcam entry label info

ing-qos

Ingress QOS and L3 QOS region

optimize

Optimize bits for IFACL and BD Labels allocated to QOS and L3 QOS regions

Command Mode

  • /exec/configure

hardware access-list tcam label ing-racl 9

[no] hardware access-list tcam label ing-racl 9

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

label

Tcam entry label info

ing-racl

Ingress RACL region

9

Size in bits for BD-Labels allocated to Ingress-RACL region

Command Mode

  • /exec/configure

hardware access-list tcam label vrf-nat

[no] hardware access-list tcam label vrf-nat <label_width>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

label

Tcam entry label info

vrf-nat

Ingress vrf-aware NAT region

label_width

Enter label width

Command Mode

  • /exec/configure

hardware access-list tcam per-entry-stats template

hardware access-list tcam per-entry-stats template <template-type>

Syntax Description

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

per-entry-stats

Per Entry Stats

template

Configure template-based feature stats

template-type

Command Mode

  • /exec/configure

hardware access-list tcam region

[no] hardware access-list tcam region <type> <tcam_size> [ match-profile <match-profile-num> ] [ per-port-stats ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

type

Region type

tcam_size

Enter tcam size

match-profile

(Optional) Tcam match filter profile

match-profile-num

(Optional) tcam region profile

per-port-stats

(Optional) Per Port Stats

Command Mode

  • /exec/configure

hardware access-list tcam region double-wide

[no] hardware access-list tcam region <double-wide-region> <tcam_size> double-wide

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

double-wide-region

Region type

tcam_size

Enter tcam size

double-wide

Double Width

Command Mode

  • /exec/configure

hardware access-list tcam region ing-flow-redirect

[no] hardware access-list tcam region ing-flow-redirect <tcam_size>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

ing-flow-redirect

Egress region in ACX

tcam_size

Enter tcam size

Command Mode

  • /exec/configure

hardware access-list tcam region qualify

[no] hardware access-list tcam region <udf_tcam_type> qualify <udf_version> { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

udf_tcam_type

Region type

qualify

Configure UDFs to be qualified for region

udf_version

UDF vesion

udf_name

UDF name

Command Mode

  • /exec/configure

hardware access-list tcam region tcp-nat

[no] hardware access-list tcam region tcp-nat <tcam_size>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

access-list

Access Control List

tcam

Configure tcam parameters

region

Configure tcam region

tcp-nat

TCP NAT region within NAT region

tcam_size

Enter tcam size

Command Mode

  • /exec/configure

hardware ecmp hash-offset

[no] hardware ecmp hash-offset <value> [ concatenation ] | no hardware ecmp hash-offset

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

ecmp

ECMP configuration

hash-offset

Configure hash offset

value

Hash offset 0-15 non-concatenate mode, 0-63 concatenate mode

concatenation

(Optional) Configure hash concatenation

Command Mode

  • /exec/configure

hardware ecmp hash-polynomial

hardware ecmp hash-polynomial <poly-type> | no hardware ecmp hash-polynomial

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

ecmp

ECMP configuration

hash-polynomial

Configure hash polynomial

poly-type

Polynomial type

Command Mode

  • /exec/configure

hardware ejector enable

[no] hardware ejector enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

ejector

Card ejector functionality

enable

enabled means when both ejectors are open, card is powered down

Command Mode

  • /exec/configure

hardware fan-sprom

[no] hardware fan-sprom

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

fan-sprom

Enable reading of FAN SPROM on supported models

Command Mode

  • /exec/configure

hardware fan-zone raise-speed

[no] hardware fan-zone <fan_zone_id> raise-speed <speed-to-raise>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

fan-zone

Fan Zone supported in the switch

fan_zone_id

please enter fan zone id whose speed needs to be increased

raise-speed

Speed to be added for current fan zone speed

speed-to-raise

please enter additional fan speed

Command Mode

  • /exec/configure

hardware flow-table analytics-netflow

[no] hardware flow-table analytics-netflow

Syntax Description

hardware

Hardware Internal Information

flow-table

Flow table

analytics-netflow

Enable both features

Command Mode

  • /exec/configure

hardware flow-table collect-drop-reason

[no] hardware flow-table collect-drop-reason

Syntax Description

hardware

Hardware Internal Information

flow-table

Flow table

collect-drop-reason

Enable dropCollect feature

Command Mode

  • /exec/configure

hardware flow-table collect-drop-reason

[no] hardware flow-table collect-drop-reason

Syntax Description

hardware

Hardware Internal Information

flow-table

Flow table

collect-drop-reason

Enable dropCollect feature

Command Mode

  • /exec/configure

hardware forwarding ip statistics

[no] hardware forwarding ip statistics

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

forwarding

forwarding information

ip

address family

statistics

enable hardware statistics

Command Mode

  • /exec/configure

hardware forwarding l3 resource route non-deterministic

[no] hardware forwarding l3 resource route non-deterministic

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

hardware information

forwarding

forwarding information

l3

Layer-3

resource

hardware resources

route

TCAM capacity to hold prefixes

non-deterministic

extend upto 1M

Command Mode

  • /exec/configure

hardware forwarding unicast trace

[no] hardware forwarding unicast trace

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

forwarding

Hardware forwarding

unicast

Hardware Unicast forwarding

trace

Debug traces

Command Mode

  • /exec/configure

hardware ip glean throttle

[no] hardware ip glean throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

Command Mode

  • /exec/configure

hardware ip glean throttle maximum

{ hardware ip glean throttle maximum <count> } | { no hardware ip glean throttle maximum }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

maximum

Maximum number of entries

count

Count

Command Mode

  • /exec/configure

hardware ip glean throttle syslog

{ hardware ip glean throttle syslog <pkt-count> } | { no hardware ip glean throttle syslog }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

syslog

Threshold for syslog for number of packets hitting the entry

pkt-count

Packet count

Command Mode

  • /exec/configure

hardware ip glean throttle timeout

{ hardware ip glean throttle timeout <timeout-in-sec> } | { no hardware ip glean throttle timeout }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ip

IP

glean

Glean

throttle

Throttle

timeout

Timeout

timeout-in-sec

Timeout value in seconds (should be multiple of 30, else will be rounded off to nearest boundary)

Command Mode

  • /exec/configure

hardware ipv6 glean throttle

[no] hardware ipv6 glean throttle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

Command Mode

  • /exec/configure

hardware ipv6 glean throttle maximum

{ hardware ipv6 glean throttle maximum <count> } | { no hardware ipv6 glean throttle maximum }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

maximum

Maximum number of entries

count

Count

Command Mode

  • /exec/configure

hardware ipv6 glean throttle syslog

{ hardware ipv6 glean throttle syslog <pkt-count> } | { no hardware ipv6 glean throttle syslog }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

syslog

Threshold for syslog for number of packets hitting the entry

pkt-count

Packet count

Command Mode

  • /exec/configure

hardware ipv6 glean throttle timeout

{ hardware ipv6 glean throttle timeout <timeout-in-sec> } | { no hardware ipv6 glean throttle timeout }

Syntax Description

no

Negate a command or set its defaults

hardware

Hardware information

ipv6

IPv6

glean

Glean

throttle

Throttle

timeout

Timeout

timeout-in-sec

Timeout value in seconds (should be multiple of 30, else will be rounded off to nearest boundary)

Command Mode

  • /exec/configure

hardware module boot-order reverse

[no] hardware module boot-order reverse

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

module

applies on all the modules

boot-order

Configure order of module power-up

reverse

reverse order of module power-up

Command Mode

  • /exec/configure

hardware multicast global-tx-span

[no] hardware multicast global-tx-span

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

multicast

Change multicast setting

global-tx-span

Modify table programming to support TX multicast SPAN across slices

Command Mode

  • /exec/configure

hardware profile buffer info poll-interval timer

[no] hardware profile buffer info poll-interval [ module <module> ] timer <msec>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

Buffer

info

Information

poll-interval

System buffer status polling interval

module

(Optional) Slot/module

module

(Optional) Slot/module number

timer

Polling timer

msec

Polling timer value in msecs

Command Mode

  • /exec/configure

hardware profile buffer info port-threshold threshold

[no] hardware profile buffer info port-threshold [ module <module> ] threshold <value>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

Buffer

info

Information

port-threshold

Set port egress buffer usage threshold

module

(Optional) Slot/module

module

(Optional) Slot/module number

threshold

threshold value

value

percentage of maximum usage

Command Mode

  • /exec/configure

hardware profile buffer info syslog-interval timer

[no] hardware profile buffer info syslog-interval timer <sec>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

buffer

Buffer

info

Information

syslog-interval

time-interval for buffer event syslogs

timer

Polling timer

sec

0 - syslogging off non-zero - time value in seconds

Command Mode

  • /exec/configure

hardware profile buffer monitor unicast

hardware profile buffer monitor { unicast | multicast } [ internal ] [ sampling <sampling> ] [ threshold <threshold> ] [ interface <intf-num> | sclass <sclass> ] | no hardware profile buffer monitor

Syntax Description

no

Negate a command or set its defaults

hardware

Configure hardware profile buffer monitor settings

profile

profile buffer monitor settings

buffer

Buffer

monitor

buffer monitor

unicast

unicast

multicast

multicast

internal

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

sampling

(Optional) sampling interval in nano-seconds

sampling

(Optional) sampling interval in nano-seconds

threshold

(Optional) histogram threshold in Kbytes with 384 Kbytes increment

threshold

(Optional) histogram threshold in Kbytes with 384 Kbytes increment

interface

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

intf-num

(Optional) enable buffer monitoring on an interface

sclass

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

sclass

(Optional) enable buffer monitoring on a system class of services

Command Mode

  • /exec/configure

hardware profile buffer qosgroup threshold

[no] hardware profile buffer qosgroup <groupid> threshold <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

N3500

profile

Profile

buffer

Buffer

qosgroup

Qos-group

groupid

Group-id

threshold

Threshold

percentage

Percentage of maximum usage

Command Mode

  • /exec/configure

hardware profile buffer span-threshold

[no] hardware profile buffer span-threshold <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

N3500

profile

Profile

buffer

Buffer

span-threshold

Span Threshold

percentage

Percentage of maximum usage

Command Mode

  • /exec/configure

hardware profile buffer stuck reset-reload lenient

hardware profile buffer stuck reset-reload { lenient | aggressive } | no hardware profile buffer stuck reset-reload

Syntax Description

no

Negate a command or set its defaults

hardware

Configure hardware buffer stuck reset settings

profile

profile reset settings

buffer

Buffer

stuck

stuck scenario

reset-reload

reload the switch

lenient

10 second interval buffer probing

aggressive

5 second interval buffer probing

Command Mode

  • /exec/configure

hardware profile counter-manager feature counter-scale

{ [ no ] hardware profile counter-manager feature <feature_name> counter-scale <counter_scale> | no hardware profile counter-manager feature <feature_name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Configure hardware profile setting

profile

profile settings

counter-manager

counter-manager

feature

feature_name

feature_name

counter-scale

counter scale

counter_scale

counter number to configure

Command Mode

  • /exec/configure

hardware profile disable parse-err

[no] hardware profile disable parse-err

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

disable

Disable

parse-err

Drops due to parse error

Command Mode

  • /exec/configure

hardware profile dlb

[no] hardware profile dlb

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

dlb

Dynamic load balancing

Command Mode

  • /exec/configure

hardware profile dme load-interval

{ hardware profile dme load-interval <load_interval> } | { no hardware profile dme load-interval }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

dme

DME load-interval

load-interval

Specify interval for load calculation on phy interface

load_interval

Load interval delay in seconds

Command Mode

  • /exec/configure

hardware profile ecmp auto-recovery threshold

hardware profile ecmp auto-recovery threshold <percentage> | no hardware profile ecmp auto-recovery threshold

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

ecmp

ECMP settings

auto-recovery

ECMP auto-recovery settings

threshold

ECMP table free percentage threshold for auto-recovery

percentage

Percentage

Command Mode

  • /exec/configure

hardware profile ecmp resilient

[no] hardware profile ecmp resilient

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

ecmp

ECMP settings

resilient

Configure ECMP resilient mode

Command Mode

  • /exec/configure

hardware profile ecmp template module

[no] hardware profile ecmp template [ l3vpn ] module <module>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

ecmp

set the ecmp template profile

template

set the ecmp template profile

l3vpn

(Optional) set the l3vpn ecmp template profile

module

Enter module number

module

Command Mode

  • /exec/configure

hardware profile flow-redirect forward-pdu

[no] hardware profile flow-redirect forward-pdu

Syntax Description

no

(Optional) Negate the command

hardware

N3500

profile

Profile

flow-redirect

FlowRedirect

forward-pdu

Forward_pdu

Command Mode

  • /exec/configure

hardware profile forwarding-mode warp

[no] hardware profile forwarding-mode { warp [ lpm-entry <lpm_warp> host-entry <host> l2-entry <l2> mcast-entry <mcst_warp> ] | normal [ lpm-entry <ipv4> mcast-entry <mcst> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

forwarding-mode

Forwarding mode setting

warp

Warp forwarding mode setting

normal

Normal forwarding mode setting

lpm-entry

(Optional) 4K aligned total IPv4 entries

ipv4

(Optional) 4K aligned total IPv4 entries

mcast-entry

(Optional) 4K aligned total Mcast entries

mcst

(Optional) 4K aligned total Mcast entries

lpm_warp

(Optional) 4K aligned total IPv4 entries

mcst_warp

(Optional) 4K aligned total Mcast entries

host-entry

(Optional) 4K aligned total Host entries

host

(Optional) 4K aligned total Host entries

l2-entry

(Optional) 4K aligned total L2 entries

l2

(Optional) 4K aligned total L2 entries

Command Mode

  • /exec/configure

hardware profile front portmode

hardware profile front portmode <port-mode> | no hardware profile front portmode

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

front

port 1 QSFP/SFP+ settings

portmode

QSFP or SFP+

port-mode

Configure QSFP/sfp+ port mode

Command Mode

  • /exec/configure

hardware profile gpe-5-timer enable

[no] hardware profile gpe-5-timer enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

gpe-5-timer

gpe-5-timer setting

enable

Enable periodic GPE-5 Disable/enable timer

Command Mode

  • /exec/configure

hardware profile ipv6 alpm carve-value

[no] hardware profile ipv6 alpm carve-value <ipv6_alpm_carve_value>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

ipv6

ipv6

alpm

alpm mode

carve-value

carve value

ipv6_alpm_carve_value

maximum entries

Command Mode

  • /exec/configure

hardware profile ipv6 lpm-entries maximum

[no] hardware profile ipv6 lpm-entries maximum <ipv6_lpm_max_entry>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

ipv6

ipv6

lpm-entries

lpm(non-host) entries

maximum

maximum limit

ipv6_lpm_max_entry

maximum entries

Command Mode

  • /exec/configure

hardware profile latency monitor

hardware profile latency monitor [ threshold-avg <threshold-avg> ] [ threshold-max <threshold-max> ] [ sampling <sampling> ] | no hardware profile latency monitor

Syntax Description

no

Negate a command or set its defaults

hardware

Configure hardware profile latency monitor settings

profile

profile latency monitor settings

latency

latency

monitor

latency monitor

threshold-avg

(Optional) average latency threshold in nano-seconds

threshold-avg

(Optional) average latency threshold in nano-seconds

threshold-max

(Optional) maximum latency threshold in nano-seconds

threshold-max

(Optional) maximum latency threshold in nano-seconds

sampling

(Optional) sampling interval in seconds

sampling

(Optional) sampling interval in seconds

Command Mode

  • /exec/configure

hardware profile mdb module

[no] hardware profile { mdb-balanced | mdb-balanced-exem } module <module>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

mdb-balanced

Set the hardware mdb profile for module to balanced

mdb-balanced-exem

Set the hardware mdb profile for module to balanced-exem

module

Enter module number

module

Command Mode

  • /exec/configure

hardware profile module

[no] hardware profile { vxlan | mpls | mvpn-stats | acl-stats | acl-eg-ext } module { all | <module> }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

vxlan

Set the hardware profile for module to vxlan

mpls

Set the hardware profile for module to mpls

mvpn-stats

Set the hardware profile for module for MVPN statistics

acl-stats

Set the hardware profile for module to acl

acl-eg-ext

Set the hardware profile for module to acl-eg-ext

module

Enter module number

all

All modules

module

Command Mode

  • /exec/configure

hardware profile mpls adjacency-stats bytes

[no] hardware profile mpls adjacency-stats bytes

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

Profile

mpls

MPLS Statistics Mode

adjacency-stats

adjacency-stats

bytes

Bytes Only

Command Mode

  • /exec/configure

hardware profile mpls extended-ecmp

[no] hardware profile mpls extended-ecmp

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

Profile

mpls

MPLS routing ECMP mode

extended-ecmp

extended-ecmp mode

Command Mode

  • /exec/configure

hardware profile multicast flex-stats-enable

[no] hardware profile multicast flex-stats-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

flex-stats-enable

Enable real time stats

Command Mode

  • /exec/configure

hardware profile multicast max-limit

{ hardware profile multicast max-limit <mcast-ent> } | { no hardware profile multicast max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

max-limit

maximum limit for multicast entries

mcast-ent

Mcast Table Entries

Command Mode

  • /exec/configure

hardware profile multicast max-limit lpm-entries

[no] hardware profile multicast max-limit lpm-entries <ipv4_mcast_lpm_max_entry>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

max-limit

maximum limit for multicast entries

lpm-entries

lpm(non-host) entries

ipv4_mcast_lpm_max_entry

maximum entries

Command Mode

  • /exec/configure

hardware profile multicast nlb

[no] hardware profile multicast nlb

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

nlb

network load balancing for multicast entries

Command Mode

  • /exec/configure

hardware profile multicast nlb Port-Channel

[no] hardware profile multicast nlb Port-Channel

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

nlb

network load balancing for multicast entries

Port-Channel

Multicast NLB on a stick port-channel configuration

Command Mode

  • /exec/configure

hardware profile multicast optimization disable

[no] hardware profile multicast optimization disable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Set hardware profile

profile

Profile settings

multicast

set multicast profile

optimization

set multicast optimization profile

disable

set the multicast optimization disable profile

Command Mode

  • /exec/configure

hardware profile multicast rpf-check-optimization

{ hardware profile multicast rpf-check-optimization } | { no hardware profile multicast rpf-check-optimization }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

rpf-check-optimization

RPF Check optimization on Monticello ASIC

Command Mode

  • /exec/configure

hardware profile multicast service-reflect port

{ hardware profile multicast service-reflect port <port-num> } | { no hardware profile multicast service-reflect }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

service-reflect

service-reflect settings

port

loopback port

port-num

loopback port-num

Command Mode

  • /exec/configure

hardware profile multicast slow-receiver port

hardware profile multicast slow-receiver port <port> | no hardware profile multicast slow-receiver port <port>

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

Profile

multicast

Multicast settings

slow-receiver

Multicast slow receiver

port

Port

port

Port number

Command Mode

  • /exec/configure

hardware profile multicast stats-disable

[no] hardware profile multicast stats-disable

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

stats-disable

Disable multicast stats

Command Mode

  • /exec/configure

hardware profile multicast syslog-threshold

[no] hardware profile multicast syslog-threshold <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

multicast

Multicast settings

syslog-threshold

MROUTE table syslog threshold

percentage

Percentage (Default is 90)

Command Mode

  • /exec/configure

hardware profile npu power

[no] hardware profile npu power { { fabric <fm_profile> } | { linecard <lc_profile> module <module> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

Hardware profile

npu

npu power profile

power

npu power profile

fabric

fabric card

linecard

line card

lc_profile

Enter the linecard profile

fm_profile

Enter the fabric profile

module

module

module

please enter the module number

Command Mode

  • /exec/configure

hardware profile packet-drop

[no] hardware profile packet-drop

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

packet-drop

Configure Packet Drop parameters

Command Mode

  • /exec/configure

hardware profile pbr ecmp paths

[no] hardware profile pbr ecmp paths <maxpath>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

pbr

Policy based routing

ecmp

Equal cost multi path

paths

ecmp path

maxpath

Maximum ecmp paths

Command Mode

  • /exec/configure

hardware profile pbr next-hop fast-convergence

[no] hardware profile pbr next-hop fast-convergence

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

pbr

Policy-based Routing feature settings

next-hop

PBR next-hop

fast-convergence

Enable/Disable PBR fast convergence

Command Mode

  • /exec/configure

hardware profile pbr skip-selfip

[no] hardware profile pbr skip-selfip

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

pbr

PBR feature settings

skip-selfip

Configure Skipping PBR for self-ip packets

Command Mode

  • /exec/configure

hardware profile pfc mmu buffer-reservation

[no] hardware profile pfc mmu buffer-reservation <percentage>

Syntax Description

no

(Optional) Negate the command

hardware

Hardware Internal Information

profile

profile settings

pfc

System level priority-flow-control settings

mmu

Hardware memory management unit configuration

buffer-reservation

Shared pool buffer reservation

percentage

Percentage of shared pool buffers to be reserved

Command Mode

  • /exec/configure

hardware profile portmode

{ hardware profile portmode <port-mode> [ 2-tuple ] } | no hardware profile portmode

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

portmode

QSFP port mode setting

port-mode

Configure QSFP port mode

2-tuple

(Optional) Display QSFP portnames in 2-tuple mode even in 10G mode

Command Mode

  • /exec/configure

hardware profile racl priority toggle

[no] hardware profile racl priority toggle

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

racl

RACL settings

priority

Configure tcam parameters

toggle

High Priority for RACL than NAT and VACL

Command Mode

  • /exec/configure

hardware profile statistics pstat

[no] hardware profile statistics pstat [ peak ]

Syntax Description

no

(Optional) Negate the command

hardware

Configure hardware profile setting

profile

profile settings

statistics

hardware stats

pstat

Enable Pstat default is instantaneous

peak

(Optional) Peak stats

Command Mode

  • /exec/configure

hardware profile sub-interface flex-stats l3

hardware profile sub-interface flex-stats { l3 | l2 } | no hardware profile sub-interface flex-stats

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

sub-interface

For sub-interface settings

flex-stats

Enable real time stats

l3

Enable L3 SI Stats

l2

Enable L2 SI Stats

Command Mode

  • /exec/configure

hardware profile svi-and-si flex-stats-enable

[no] hardware profile svi-and-si flex-stats-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

svi-and-si

For svi-and-si settings

flex-stats-enable

Enable real time stats

Command Mode

  • /exec/configure

hardware profile svi flex-stats-enable

[no] hardware profile svi flex-stats-enable

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

profile settings

svi

For SVI settings (in unicast SVI, in UMF VLAN, in/out UMF VXLAN)

flex-stats-enable

Enable real time stats

Command Mode

  • /exec/configure

hardware profile tcam ipv6-sup-tcam match-inner

{ hardware profile tcam ipv6-sup-tcam match-inner } | { no hardware profile tcam ipv6-sup-tcam match-inner }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

ipv6-sup-tcam

IPv6 SUP TCAM parameters

match-inner

match inner payload for tunnel packets

Command Mode

  • /exec/configure

hardware profile tcam mcast racl-bridge

{ hardware profile tcam mcast racl-bridge } | { no hardware profile tcam mcast racl-bridge }

Syntax Description

no

Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

mcast

multicast address acess

racl-bridge

apply permit/drop for mcast bridged pkt

Command Mode

  • /exec/configure

hardware profile tcam region

[no] hardware profile tcam region { <tcam_compat_type> <tcam_compat_size> | ifacl <tcam_compat_size> [ double-wide ] | nat <tcam_compat_size> | ifacl-wide <ifacl_wide_tcam_size> }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

profile

profile

tcam

Configure tcam parameters

region

Configure tcam region

ifacl

IPV4 PACL size

double-wide

(Optional) Configure tcam as double wide

nat

NAT size

ifacl-wide

IFACL WIDE Size

tcam_compat_type

tcam_compat_size

Enter tcam size

ifacl_wide_tcam_size

Enter tcam size

Command Mode

  • /exec/configure

hardware profile tcam region span qualify udf

[no] hardware profile tcam region span qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

span

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

  • /exec/configure

hardware profile tcam region spanv6-l2 qualify udf

[no] hardware profile tcam region spanv6-l2 qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

spanv6-l2

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

  • /exec/configure

hardware profile tcam region spanv6 qualify udf

[no] hardware profile tcam region spanv6 qualify udf { <udf_name> } +

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

region

Configure tcam region

spanv6

Configure for span region

qualify

Configure UDFs to be qualified for span region

udf

Configure UDF names

udf_name

UDF name

Command Mode

  • /exec/configure

hardware profile tcam resource service-template

[no] hardware profile tcam resource service-template { <name> } [ module { <lc> | <fm> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

resource

Configure tcam hardware resources

service-template

Commit template

name

Select name of template

module

THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

lc

(Optional) line card number

fm

(Optional) fabric module number

Command Mode

  • /exec/configure handle auto 424

hardware profile tcam resource template

[no] hardware profile tcam resource template { <name> { ref-template <temp-nontahoe> | ref-template-tahoe <temp-tahoe> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Change hardware usage settings

profile

Profile settings

tcam

Configure tcam parameters

resource

Configure tcam hardware resources

template

Configure template based tcam carving parameters

ref-template

Select a default template as reference

temp-nontahoe

ref-template-tahoe

Select a default template as reference

temp-tahoe

name

Create/Select name of custom template

Command Mode

  • /exec/configure

hardware profile ucast6 lpm-65-to-127-max-limit

{ hardware profile ucast6 lpm-65-to-127-max-limit <unicast-ent> } | { no hardware profile ucast6 lpm-65-to-127-max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

ucast6

unicast ipv6 settings

lpm-65-to-127-max-limit

maximum limit for unicast ipv6 lpm-65-to-127 entries, default is 256

unicast-ent

Unicast ipv6 lpm-65-to-127 Table Entries

Command Mode

  • /exec/configure

hardware profile ucast6 max-limit

{ hardware profile ucast6 max-limit <unicast-ent> } | { no hardware profile ucast6 max-limit }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

ucast6

unicast ipv6 settings

max-limit

maximum limit for unicast ipv6 entries

unicast-ent

Unicast ipv6 Table Entries

Command Mode

  • /exec/configure

hardware profile unicast enable-host-ecmp

[no] hardware profile unicast enable-host-ecmp [ arp-nd | [ ipv4 [ arp ] ] | [ ipv6 [ nd ] ] ]

Syntax Description

no

(Optional) Negate the command

hardware

Change hardware usage settings

profile

profile settings

unicast

Unicast settings

enable-host-ecmp

Enable ECMP support for /32 (IPv4) and /128 (IPv6) routes

ipv4

(Optional) Enable ECMP support for /32 (IPv4 Only) Routes

ipv6

(Optional) Enable ECMP support for /128 (IPv6 Only) Routes

arp-nd

(Optional) Retain ARP (IPv4) and ND (IPv6) Routes in Host-Table

arp

(Optional) Retain ARP Entries in Host-Table

nd

(Optional) Retain ND Entries in Host-Table

Command Mode

  • /exec/configure

hardware profile unicast syslog-threshold

{ hardware profile unicast syslog-threshold <percentage> } | { no hardware profile unicast syslog-threshold }

Syntax Description

no

Negate the command

hardware

Change hardware usage settings

profile

profile settings

unicast

Unicast settings

syslog-threshold

Unicast Route table syslog threshold

percentage

Percentage

Command Mode

  • /exec/configure

hardware qos dynamic-buffer-sharing

[no] hardware qos dynamic-buffer-sharing

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

qos

Configure qos related configuration

dynamic-buffer-sharing

Enable dynamic buffer sharing

Command Mode

  • /exec/configure

hardware qos fc rate-shaper

[no] hardware qos fc rate-shaper [ low ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

qos

Configure qos related configuration

fc

Fibre Channel interface related configuration

rate-shaper

Rate Shaper for FC interface

low

(Optional) Configure FC interface low rate shaper

Command Mode

  • /exec/configure

hardware qos pfc mc-drop

[no] hardware qos pfc mc-drop

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Internal Information

qos

Configure qos related configuration

pfc

Priority-flow-control specific configuration

mc-drop

Multicast packets are droped in lossless queue

Command Mode

  • /exec/configure

hardware sample-redirect module redirect-interface

hardware sample-redirect module <num> redirect-interface <interface>

Syntax Description

hardware

Change hardware usage settings

sample-redirect

Redirect netflow sampled data

module

Line card module

num

slot number

redirect-interface

Interface for redirecting the traffic

interface

Interface Name

Command Mode

  • /exec

hardware switch-id

[no] hardware switch-id <id-val>

Syntax Description

no

(Optional) Negate a command or set its defaults

hardware

Hardware Configuration commands

switch-id

Switch-ID Configuration

id-val

Switch=ID value

Command Mode

  • /exec/configure

hash-mode gtp

hash-mode { gtp-inner-v4 | gtp-inner-v6 } | no hash-mode { gtp-inner-v4 | gtp-inner-v6 }

Syntax Description

no

Negate a command or set its defaults

hash-mode

hash-mode

gtp-inner-v4

gtp-inner-v4

gtp-inner-v6

gtp-inner-v6

Command Mode

  • /exec/configure/if-eth-l2-non-member /exec/configure/if-ethernet-all /exec/configure/if-eth-port-channel-switch

head

| head [ -n <lines> ]

Syntax Description

|

Pipe command output to filter

head

Display first lines

-n

(Optional) modify number of lines (default 10)

lines

(Optional) number of lines to print

Command Mode

  • /output

header-type 2

[no] header-type { 2 | 3 [ rfc-compliant ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

header-type

Set ERSPAN Source version

2

ERSPAN Source Version 2

3

ERSPAN Source Version 3

rfc-compliant

(Optional) ERSPAN V3 header rfc-compliant

Command Mode

  • /exec/configure/config-monitor-erspan-src

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

hello-interval

{ { hello-interval <interval> } | { no hello-interval [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/router-ospf/vrf/router-ospf-slink

history

{ no | default } history { { distributions-of-statistics-kept } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { hours-of-statistics-kept } | { statistics-distribution-interval } }

Syntax Description

no

default

Set a command to its defaults

history

History and Distribution Data

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

enhanced

Enable enhanced history collection

interval

(Optional) Aggregation interval

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

statistics-distribution-interval

Statistics distribution interval size

Command Mode

  • /exec/configure/ip-sla/jitter

history

{ no | default } history { { buckets-kept } | { distributions-of-statistics-kept } | { enhanced [ interval [ <interval-seconds> [ buckets [ <num-buckets> ] ] ] ] } | { filter } | { hours-of-statistics-kept } | { lives-kept } | { statistics-distribution-interval } }

Syntax Description

no

default

Set a command to its defaults

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

enhanced

Enable enhanced history collection

interval

(Optional) Aggregation interval

interval-seconds

(Optional) Interval in seconds

buckets

(Optional) Number of buckets to collect data

num-buckets

(Optional) Number of buckets

filter

Add operation to History when...

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

history

history { { buckets-kept <num-buckets-kept> } | { distributions-of-statistics-kept <num-dist-stats> } | { enhanced interval <interval-seconds> buckets <num-buckets> } | { filter { all | failures | none | overThreshold } } | { hours-of-statistics-kept <num-hours-of-stats> } | { lives-kept <life-size-value> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

num-buckets-kept

Bucket size value (default 15)

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

enhanced

Enable enhanced history collection

interval

Aggregation interval

interval-seconds

Interval in seconds

buckets

Number of buckets to collect data

num-buckets

Number of buckets

filter

Add operation to History when...

all

Collect every operation in History

failures

Collect operations that fail in History

none

Shutoff History collection

overThreshold

Collect operations that are over threshold in History

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

lives-kept

Maximum number of history lives to collect

life-size-value

Life size value (default 0)

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20ms), Value in usec if precision microsecond is enabled

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho

history

{ no | default } history { { buckets-kept } | { distributions-of-statistics-kept } | { filter } | { hours-of-statistics-kept } | { lives-kept } | { statistics-distribution-interval } }

Syntax Description

no

default

Set a command to its defaults

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

filter

Add operation to History when...

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

lives-kept

Maximum number of history lives to collect

statistics-distribution-interval

Statistics distribution interval size

Command Mode

  • /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

history

history { { buckets-kept <num-buckets-kept> } | { distributions-of-statistics-kept <num-dist-stats> } | { filter { all | failures | none | overThreshold } } | { hours-of-statistics-kept <num-hours-of-stats> } | { lives-kept <life-size-value> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

history

History and Distribution Data

buckets-kept

Maximum number of history buckets to collect

num-buckets-kept

Bucket size value (default 15)

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

filter

Add operation to History when...

all

Collect every operation in History

failures

Collect operations that fail in History

none

Shutoff History collection

overThreshold

Collect operations that are over threshold in History

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

lives-kept

Maximum number of history lives to collect

life-size-value

Life size value (default 0)

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20ms), Value in usec if precision microsecond is enabled

Command Mode

  • /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

history

history { { distributions-of-statistics-kept <num-dist-stats> } | { enhanced interval <interval-seconds> buckets <num-buckets> } | { hours-of-statistics-kept <num-hours-of-stats> } | { statistics-distribution-interval <dist-interval> } }

Syntax Description

history

History and Distribution Data

distributions-of-statistics-kept

Maximum number of statistics distribution buckets to capture

num-dist-stats

Distribution bucket size value (default 1)

enhanced

Enable enhanced history collection

interval

Aggregation interval

interval-seconds

Interval in seconds

buckets

Number of buckets to collect data

num-buckets

Number of buckets

hours-of-statistics-kept

Maximum number of statistics hour groups to capture

num-hours-of-stats

Hour groups size value (default 2)

statistics-distribution-interval

Statistics distribution interval size

dist-interval

Distribution interval value in msec (default 20ms), Value in usec if precision microsecond is enabled

Command Mode

  • /exec/configure/ip-sla/jitter

hold-down threshold count

[no] hold-down threshold count <count> [ time <time> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hold-down

Hold EPBR endpoints down after threshold is hit

threshold

Threshold specification

count

Failure count to be hit for threshold to be met

count

Threshold failure count(0 to disable, minimum 3 to enable)

time

(Optional) Time interval in which threshold is to be met

time

(Optional) Threshold time interval in seconds(0 to disable, minimum 60 to enable)

Command Mode

  • /exec/configure/epbr/svc /exec/configure/epbr/fwd-svc /exec/configure/epbr-sess/svc /exec/configure/epbr-sess/fwd-svc

hold-down threshold count

[no] hold-down threshold count <count> [ time <time> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hold-down

Hold ITD nodes down after threshold is hit

threshold

Threshold specification

count

Failure count to be hit for threshold to be met

count

Threshold failure count

time

(Optional) Time interval in which threshold is to be met

time

(Optional) Threshold time interval in seconds

Command Mode

  • /exec/configure/itd-dg-node /exec/configure/itd-dg-node-standby /exec/configure/itd-device-group

holdtime

holdtime { infinite | <secs> } | no holdtime

Syntax Description

no

Negate a command or set its defaults

holdtime

LDP session holdtime

infinite

Ignore LDP session holdtime

secs

Holdtime in seconds

Command Mode

  • /exec/configure/ldp

hop-limit maximum

[no] hop-limit maximum <limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

limit

Maximum hop count value allowed

Command Mode

  • /exec/configure/config-ra-guard

hop-limit minimum

[no] hop-limit minimum <limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

limit

Minimum hop count value allowed

Command Mode

  • /exec/configure/config-ra-guard

hop

{ hop <val> } | { no hop }

Syntax Description

no

Negate a command or set its defaults

hop

Configure ngoam hop count

val

Configure ngoam service hop count value

Command Mode

  • /exec/configure/configngoamprofile

host-reachability protocol

[no] host-reachability protocol { bgp | openflow | openflow-ir }

Syntax Description

no

(Optional) Negate a command or set its defaults

host-reachability

Configure host reachability advertisement

protocol

Control protocol to use

bgp

Border Gateway Protocol

openflow

OpenFlow

openflow-ir

OpenFlow-IR

Command Mode

  • /exec/configure/if-nve

host-reachability protocol controller

[no] host-reachability protocol controller <controller-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

host-reachability

Configure host reachability advertisement

protocol

Control protocol to use

controller

Controller

controller-id

Controller id value

Command Mode

  • /exec/configure/if-nve

host

[no] { host <hostaddr> | <prefix> | <addr> <mask> }

Syntax Description

no

(Optional) Negate a command or set its defaults

host

Host address of the object-group member

hostaddr

A.B.C.D Host address

addr

A.B.C.D Network address of object-group member

mask

A.B.C.D wildcard

prefix

A.B.C.D/nn Network prefix of the object-group member

Command Mode

  • /exec/configure/objgroup

host group permit

{ <seq> host <hostip> group <range> { permit | deny } } | { no <seq> [ host <hostip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-vrf/nbm-host-policy/sender

host group permit

{ <seq> host <hostip> group <range> { permit | deny } } | { no <seq> [ host <hostip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-host-policy/sender

host port

[no] host <name-or-ip> port <portnum> [ protocol <proto> encoding <encoder> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

host

Specify destination host

port

Set destination port

protocol

(Optional) Set transport protocol

encoding

(Optional) Set encoding format

name-or-ip

IPv4 or IPv6 address or DNS name of destination

portnum

Destination port

proto

(Optional)

encoder

(Optional) Set encoding type for this destination

Command Mode

  • /exec/configure/telemetry/destination-group

host source group permit

{ <seq> host <hostip> source <sourceip> group <range> { permit | deny } } | { no <seq> [ host <hostip> source <sourceip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address value

source

Source IP Address

sourceip

Source IP Address value

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-vrf/nbm-host-policy/receiver

host source group permit

{ <seq> host <hostip> source <sourceip> group <range> { permit | deny } } | { no <seq> [ host <hostip> source <sourceip> group <range> { permit | deny } ] }

Syntax Description

no

Negate a command or set its defaults

seq

Sequence Number

host

Host IP Address

hostip

Host IP Address value

source

Source IP Address

sourceip

Source IP Address value

group

Configure explicit group ranges

range

Group Prefix

permit

Admission Permitted

deny

Admission Denied

Command Mode

  • /exec/configure/nbm-host-policy/receiver

hostname

{ hostname | switchname } <name> | no { hostname | switchname }

Syntax Description

no

Negate a command or set its defaults

hostname

Configure system's host name

switchname

Configure system's host name

name

Enter switchname

Command Mode

  • /exec/configure

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

hostname dynamic

[no] hostname dynamic

Syntax Description

no

(Optional) Negate a command or set its defaults

hostname

Set dynamic hostname for IS-IS

dynamic

Dynamic hostname

Command Mode

  • /exec/configure/l2mp-isis/l2mp-isis-vrf-common

hsrp

[no] hsrp <group-id> [ ipv4 ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

group-id

Group number (0-255 for HSRPv1)

ipv4

(Optional) Configure IP Version 4 group

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp anycast

[no] hsrp anycast <id> { ipv4 | ipv6 | both }

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP configuration commands

anycast

Anycast related commands

id

Bundle number

ipv4

Associate IP Version 4 for the bundle

ipv6

Associate IP Version 6 for the bundle

both

Associate IP Version 4 and 6 for the bundle

Command Mode

  • /exec/configure

hsrp bfd

[no] hsrp bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

bfd

BFD protocol

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp bfd all-interfaces

[no] hsrp bfd all-interfaces

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

bfd

BFD protocol

all-interfaces

On all interfaces

Command Mode

  • /exec/configure

hsrp delay minimum

hsrp delay { minimum <min-delay> | reload <reload-delay> } + | no hsrp delay [ minimum [ <min-delay> ] | reload [ <reload-delay> ] ] +

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

delay

HSRP initialisation delay

minimum

Minimum delay

reload

Delay after reload

min-delay

<0-10000> Delay in seconds

reload-delay

<0-10000> Delay in seconds

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp force state vlan

hsrp force state vlan { <vlans> | all }

Syntax Description

hsrp

Hot Standby Router Protocol (HSRP) information

force

Move the HSRP state

state

HSRP state

vlan

HSRP state changes for these vlans

all

Include all HSRP configured VLANs

vlans

VLAN IDs of the VLAN for which state change will affect

Command Mode

  • /exec

hsrp ipv6

[no] hsrp <group-id> ipv6

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

group-id

Group number

ipv6

Configure IP Version 6 group

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp mac-refresh

hsrp mac-refresh [ <time> ] | no hsrp mac-refresh

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

mac-refresh

Interface mac-refresh time

time

(Optional) Timeout value (0-10000) in sec

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp timers extended-hold

[no] hsrp timers extended-hold [ <extended-hold> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

timers

Global Timers

extended-hold

Extended Hold

extended-hold

(Optional) Time in seconds

Command Mode

  • /exec/configure

hsrp use-bia

[no] hsrp use-bia [ scope interface ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hsrp

HSRP interface configuration commands

use-bia

HSRP uses interface's burned in address

scope

(Optional) Specify the scope of use-bia

interface

(Optional) Use-bia applies to all groups on this interface or sub-interface

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

hsrp version 1

hsrp version { 1 | 2 } | no hsrp version

Syntax Description

no

Negate a command or set its defaults

hsrp

HSRP interface configuration commands

version

HSRP version

1

Version 1

2

Version 2

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan-common /exec/configure/if-port-channel /exec/configure/if-sub /exec/configure/if-ethernet-all

http get

[no] http { get } <WORD> { [ cache { disable | enable } ] [ proxy <proxy-info> ] [ source-ip { <source-ip-hostname> | <source-ip-address> } ] [ source-port <src-port> ] [ version <http-version> ] } +

Syntax Description

proxy

(Optional) <proxy-info>

source-ip

(Optional) <source-ip-hostname>

source-port

(Optional) <src-port>

version

(Optional) <http-version>

cache

(Optional) enable

no

(Optional)

http

HTTP Operation

get

HTTP get operation

WORD

URL

enable

(Optional) enable download of cached entries (default)

disable

(Optional) disable download of cached entries (default)

proxy-info

(Optional) Proxy URL

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

src-port

(Optional) Port Number (Recommended port range between 1025-65534)

http-version

(Optional) Supported HTTP versions are '1.0' and '1.1'.

Command Mode

  • /exec/configure/ip-sla

http proxy server

[no] http proxy server <hostipname> [ port <port-num> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

http

Configure http related parameters

proxy

Http Proxy related parameters

server

Server address

hostipname

IPV4/IPV6 address or DNS name of proxy server

port

(Optional) Http proxy server port

port-num

(Optional) port number

Command Mode

  • /exec/configure/trustpool

human

| human

Syntax Description

|

Pipe command output to filter

human

output in human format

Command Mode

  • /output

human

| human

Syntax Description

|

Pipe command output to filter

human

output in human format

Command Mode

  • /output

hw-module logging onboard

[no] hw-module logging onboard [ { counter-stats | module <module> [ { counter-stats } ] } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hw-module

Enable/Disable OBFL information

logging

Enable/Disable OBFL information

onboard

Enable/Disable OBFL information

counter-stats

(Optional) Enable/Disable OBFL counter statistics

module

(Optional) Enable/Disable OBFL information for Module

module

(Optional) Enter module number

Command Mode

  • /exec/configure

hw-module logging onboard

[no] hw-module logging onboard [ { environmental-history | error-stats | interrupt-stats | module <module> [ { environmental-history | error-stats | interrupt-stats | obfl-logs | cpuhog } ] | obfl-logs | cpuhog } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

hw-module

Enable/Disable OBFL information

logging

Enable/Disable OBFL information

onboard

Enable/Disable OBFL information

environmental-history

(Optional) Enable/Disable OBFL environmental history

error-stats

(Optional) Enable/Disable OBFL error statistics

interrupt-stats

(Optional) Enable/Disable OBFL interrupt statistics

cpuhog

(Optional) Enable/Disable OBFL cpu hog events

module

(Optional) Enable/Disable OBFL information for Module

module

(Optional) Enter module number

obfl-logs

(Optional) Enable/Disable OBFL (boot-uptime/device-version/obfl-history)

Command Mode

  • /exec/configure