W Commands

wait-igp-convergence

[no] wait-igp-convergence

Syntax Description

no

(Optional) Negate a command or set its defaults

wait-igp-convergence

Delay initial bestpath until redistributed IGPs have converged

Command Mode

  • /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

wait-to-restore

[no] wait-to-restore <minutes>

Syntax Description

no

(Optional) Negate a command or set its defaults

wait-to-restore

Set the wait-to-restore time

minutes

value in minutes, default 5

Command Mode

  • /exec/configure/gnss-if/fsync

wait-to-restore

[no] wait-to-restore <minutes>

Syntax Description

no

(Optional) Negate a command or set its defaults

wait-to-restore

Set the wait-to-restore time

minutes

value in minutes, default 5

Command Mode

  • /exec/configure/if-eth-base/fsync

wait-to-restore

[no] wait-to-restore <minutes>

Syntax Description

no

(Optional) Negate a command or set its defaults

wait-to-restore

Set the wait-to-restore time

minutes

value in minutes, default 5

Command Mode

  • /exec/configure/clock-if/fsync

watch

watch [ differences ] [ interval <time> ] <watch_cmd>

Syntax Description

watch

execute a program periodically

differences

(Optional) highlight the differences

interval

(Optional) watch interval

time

(Optional) interval in seconds

watch_cmd

enter the command you want to watch

Command Mode

  • /exec

watch service action apply-acl

[no] watch service <service-name> action apply-acl <acl-name> | no watch service

Syntax Description

no

(Optional) Negate a command or set its defaults

watch

Watch a pod/service

service

The pod or service to watch

service-name

Name of the service/pod to watch

action

Action to be applied

apply-acl

Change ACL config

acl-name

Name of the acl to apply

Command Mode

  • /exec/configure/kubernetes

watchlist

[no] watchlist <watchlistname>

Syntax Description

watchlist

Specify POSTCARD watchlist to use

watchlistname

Name of watchlist

Command Mode

  • /exec/configure/config-postcard-monitor

watchlist

[no] watchlist <watchlistname>

Syntax Description

watchlist

Specify INT watchlist to use

watchlistname

Name of watchlist

Command Mode

  • /exec/configure/config-int-monitor

wc

| wc [ -c | -l | -w ]

Syntax Description

|

Pipe command output to filter

wc

Count words, lines, characters

-c

(Optional) Output character count

-l

(Optional) Output line count

-w

(Optional) Output word count

Command Mode

  • /output

wedge bmc ip-addr

[no] wedge bmc ip-addr { <ip> | <ip_v6> }

Syntax Description

no

(Optional) Negate a command or set its defaults

wedge

Configure wedge Board Management controller ip address

bmc

Board Management Controller ip address

ip-addr

BMC ip address

ip

ip adddress

Command Mode

  • /exec/configure

weight

[no] weight <weight-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

weight

weight for traffic distribution

weight-value

weight value

Command Mode

  • /exec/configure/itd-dg-node

weight

[no] weight <weight-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

weight

EPBR service end-point weight for traffic distribution

weight-value

weight value

Command Mode

  • /exec/configure/epbr/fwd-svc

weight

[no] weight <weight-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

weight

weight for traffic distribution

weight-value

weight value

Command Mode

  • /exec/configure/itd-session-dg-node

weight

{ weight <weight> } | { { no | default } weight [ <weight> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

weight

Set default weight for routes from this neighbor

weight

Default weight

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

where

where

Syntax Description

where

shows the cli context you are in

Command Mode

  • /global

where detail

where detail

Syntax Description

where

shows the cli context you are in

detail

shows each entry on separate line

Command Mode

  • /global

window-size

[no] window-size <size>

Syntax Description

window-size

Configure Window size

size

window size value

Command Mode

  • /exec/configure/macsec-policy

window-size

[no] window-size <size>

Syntax Description

window-size

Configure Window size

size

window size value, in num of IP packets

Command Mode

  • /exec/configure/tunenc-policy

wred-queue qos-group-map queue-only

[no] wred-queue qos-group-map queue-only { <qid> }

Syntax Description

no

(Optional) Negate the command

wred-queue

Enable queue based ECN marking for specific qos-group

queue-only

Enable queue based ECN marking

qos-group-map

Qid value

qid

Provide qos-group value

Command Mode

  • /exec/configure

write erase

write erase

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

Command Mode

  • /exec

write erase boot

write erase boot

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

boot

Destroys boot configuration on persistent media

Command Mode

  • /exec

write erase debug

write erase debug

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

debug

Destroys debug configuration on persistent media

Command Mode

  • /exec

write erase poap

write erase poap

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

poap

Removes System-wide POAP disable configuration on persistent media

Command Mode

  • /exec

wrr-queue qos-group-map

[no] wrr-queue qos-group-map <qid> { <cos> } +

Syntax Description

no

(Optional) Negate the command

wrr-queue

Map traffic priority (QG) values to L3 Multicast Queues

qos-group-map

Qid value

qid

Provide qid value

cos

Provide qos-group-map value

Command Mode

  • /exec/configure

wrr unicast-bandwidth

[no] wrr unicast-bandwidth <bw>

Syntax Description

no

(Optional) Negate the command

wrr

Configure Unicast Traffic Bandwidth Percentage

unicast-bandwidth

Specify rate as percentage of interface data-rate

bw

Value in percentage (Default is set to 50)

Command Mode

  • /exec/configure

wwn oui

wwn oui <oui-id> | no

Syntax Description

oui

{

no

Negate a command or set its defaults

wwn

Set OUI, secondary base MAC addr and range for additional WWNs

oui-id

Enter the oui-id

Command Mode

  • /exec/configure

wwn vsan vsan-wwn

wwn vsan <i0> vsan-wwn <wwn1> | no

Syntax Description

vsan

<i0>

no

Negate a command or set its defaults

wwn

Set secondary base MAC addr and range for additional WWNs

i0

Enter the vsan id

vsan-wwn

vsan-wwn for vsan in interop mode 4

wwn1

Enter wwn for vsan in interop mode 4

Command Mode

  • /exec/configure