チャネライズド SPA におけるポート単位での詳細なインターフェイス情報を確認するには、show interface serial and show controllers sonet コマンドを使用します。
show interface serial コマンドの例については、インターフェイス コンフィギュレーションの確認を参照してください。
次に、Cisco ASR 1000 シリーズ ルータのスロット 1 に SIP が搭載され、Cisco ASR 1000 のサブスロット 0 に SPA が搭載されている場合のインターフェイス ポート 0 の出力例を示します。
Router# show controllers sonet 1/0/0
SONET 1/0/0 is up.
Hardware is SPA-1XCHSTM1/OC3
IO FPGA version: 1.7, HDLC Framer version: 0
T3/T1 Framer(1) version: 1
Sonet/SDH Framer version: 0
SUBRATE FPGA version: 1.4
HDLC controller available FIFO buffers 3760
Applique type is Channelized Sonet/SDH
Clock Source is Line
Medium info:
Type: Sonet, Line Coding: NRZ,
SECTION:
LOS = 0 LOF = 0 BIP(B1) = 85
SONET/SDH Section Tables
INTERVAL CV ES SES SEFS
23:15-23:20 0 0 0 0
23:00-23:15 0 0 0 0
22:45-23:00 85 1 1 0
Total of Data in Current and Previous Intervals
22:45-23:20 85 1 1 0
LINE:
AIS = 0 RDI = 1 REI = 65 BIP(B2) = 207
Active Defects: None
Active Alarms: None
Alarm reporting enabled for: SF SLOS SLOF B1-TCA B2-TCA
BER thresholds: SF = 10e-3 SD = 10e-6
TCA thresholds: B1 = 10e-6 B2 = 10e-6
SONET/SDH Line Tables
INTERVAL CV ES SES UAS
23:15-23:20 0 0 0 0
23:00-23:15 0 0 0 0
22:45-23:00 272 1 0 5
Total of Data in Current and Previous Intervals
22:45-23:20 272 1 0 5
.
.
.
SONET/SDH Path Tables
INTERVAL CV ES SES UAS
23:15-23:20 0 0 0 0
23:00-23:15 0 0 0 0
22:45-23:00 187382 2 0 0
Total of Data in Current and Previous Intervals
22:45-23:20 187382 2 0 0
.
.
.
T3 1/0/0 Path 1 is up.
Hardware is SPA-1XCHSTM1/OC3
IO FPGA version: 1.7, HDLC Framer version: 0
T3/T1 Framer(1) version: 1
Sonet/SDH Framer version: 0
SUBRATE FPGA version: 1.4
HDLC controller available FIFO buffers 3760
Applique type is T3
No alarms detected.
MDL transmission is enabled
FEAC code received: No code is being received
Framing is C-BIT Parity, Cablelength is 224
Clock Source is Line
Equipment customer loopback
Data in current interval (346 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
0 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
0 Severely Errored Line Secs
0 Far-End Errored Secs, 0 Far-End Severely Errored Secs
0 CP-bit Far-end Unavailable Secs
0 Near-end path failures, 0 Far-end path failures
0 Far-end code violations, 0 FERF Defect Secs
0 AIS Defect Secs, 0 LOS Defect Secs
.
.
.
CT3 1/0/0.2 is up.
Hardware is SPA-1XCHSTM1/OC3
IO FPGA version: 1.7, HDLC Framer version: 0
T3/T1 Framer(1) version: 1
Sonet/SDH Framer version: 0
SUBRATE FPGA version: 1.4
HDLC controller available FIFO buffers 3760
Applique type is Channelized T3 to T1
No alarms detected.
Framing is M23, Cablelength is 224
Clock Source is Internal
Equipment customer loopback
Data in current interval (356 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
0 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
0 Severely Errored Line Secs
0 Far-End Errored Secs, 0 Far-End Severely Errored Secs
0 CP-bit Far-end Unavailable Secs
0 Near-end path failures, 0 Far-end path failures
0 Far-end code violations, 0 FERF Defect Secs
0 AIS Defect Secs, 0 LOS Defect Secs
(Remaining output omitted)