この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章では、 Cisco Unified Communications Manager データベースから削除するゲートウェイ レコードを検索する方法について説明します。 ゲートウェイのグループを削除するには、クエリー フィルタを定義する必要があります。 [ゲートウェイの削除(Delete Gateways Configuration)] ウィンドウでは、Cisco VG200 ゲートウェイと Cisco Catalyst 6000 ゲートウェイのレコードだけを削除できます。
クエリーを使用して、 Cisco Unified Communications Manager から削除するゲートウェイ レコードを検索することができます。 [ゲートウェイの削除(Delete Gateway Configuration)] ウィンドウでは、Cisco VG200 ゲートウェイと Cisco Catalyst 6000 ゲートウェイだけを削除できます。
注意 |
削除は、最終的な操作です。削除したレコードは復元できません。 |
ステップ 1 | [削除するゲートウェイの検索/一覧表示(Find and List Gateways To Delete)] の順に選択します。 ウィンドウが表示されます。 | ||
ステップ 2 | [削除対象:ゲートウェイ、検索条件:(Delete Gateways where)] ドロップダウン リスト ボックスから、次のいずれかのオプションを選択します。 | ||
ステップ 3 | 2 番目の [検索対象:ゲートウェイ、検索条件:(Find Gateways where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。 | ||
ステップ 4 | 3 番目のドロップダウン リスト ボックスで、[表示(Show)] を選択して関連のエンドポイントを表示します。 | ||
ステップ 5 |
必要に応じて、適切な検索テキストを指定し、[検索(Find)] をクリックします。
クエリーをさらに定義するには、[AND] または [OR] を選択して複数のフィルタを追加し、ステップ 2 ~ ステップ 5 の手順を繰り返します。 |
||
ステップ 6 | [ジョブ情報(Job Information)] 領域に、ジョブの説明を入力します。 | ||
ステップ 7 | 削除の方法を選択します。 次のいずれかを実行します。 | ||
ステップ 8 | [送信(Submit)] をクリックして、ゲートウェイ レコードを削除するジョブを作成します。 | ||
ステップ 9 |
[一括管理(Bulk Administration)] メイン メニューの [ジョブスケジューラ(Job Scheduler)] オプションを使用して、このジョブのスケジュールやアクティブ化を行います。
|
この章では、 Cisco Unified Communications Manager データベースから削除するゲートウェイ レコードを検索する方法について説明します。 ゲートウェイのグループを削除するには、クエリー フィルタを定義する必要があります。 [ゲートウェイの削除(Delete Gateways Configuration)] ウィンドウでは、Cisco VG200 ゲートウェイと Cisco Catalyst 6000 ゲートウェイのレコードだけを削除できます。
クエリーを使用したシスコのゲートウェイのレコードの削除
手順クエリーを使用して、 Cisco Unified Communications Manager から削除するゲートウェイ レコードを検索することができます。 [ゲートウェイの削除(Delete Gateway Configuration)] ウィンドウでは、Cisco VG200 ゲートウェイと Cisco Catalyst 6000 ゲートウェイだけを削除できます。
注意
削除は、最終的な操作です。削除したレコードは復元できません。
ステップ 1 [削除するゲートウェイの検索/一覧表示(Find and List Gateways To Delete)] の順に選択します。 ウィンドウが表示されます。 ステップ 2 [削除対象:ゲートウェイ、検索条件:(Delete Gateways where)] ドロップダウン リスト ボックスから、次のいずれかのオプションを選択します。 ステップ 3 2 番目の [検索対象:ゲートウェイ、検索条件:(Find Gateways where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。 ステップ 4 3 番目のドロップダウン リスト ボックスで、[表示(Show)] を選択して関連のエンドポイントを表示します。 ステップ 5 必要に応じて、適切な検索テキストを指定し、[検索(Find)] をクリックします。
ヒント データベースに登録されたすべてのゲートウェイを検索するには、検索テキストを入力せずに [検索(Find)] をクリックします。
クエリーをさらに定義するには、[AND] または [OR] を選択して複数のフィルタを追加し、ステップ 2 ~ ステップ 5 の手順を繰り返します。
ステップ 6 [ジョブ情報(Job Information)] 領域に、ジョブの説明を入力します。 ステップ 7 削除の方法を選択します。 次のいずれかを実行します。 ステップ 8 [送信(Submit)] をクリックして、ゲートウェイ レコードを削除するジョブを作成します。 ステップ 9 [一括管理(Bulk Administration)] メイン メニューの [ジョブスケジューラ(Job Scheduler)] オプションを使用して、このジョブのスケジュールやアクティブ化を行います。
注意 クエリー テキスト ボックスに情報を何も入力しないと、すべてのゲートウェイ レコードが削除されます。 削除は、最終的な操作です。削除したレコードは復元できません。
関連資料