Table Of Contents

Troubleshooting Enhancements for Multilink PPP over ATM Link Fragmentation and Interleaving

Contents

How to Troubleshoot Multilink PPP over ATM LFI

Troubleshooting Multilink PPP over ATM LFI

Prerequisites

Examples

Additional References

Related Documents

MIBs

Technical Assistance

Command Reference

Troubleshooting Enhancements for Multilink PPP over ATM Link Fragmentation and Interleaving

---

The Troubleshooting Enhancements for Multilink PPP over ATM Link Fragmentation and Interleaving enhance the output of the show atm pvc, show multilink ppp, and show interfaces virtual-access commands to display multilink PPP (MLP) over ATM link fragmentation and interleaving (LFI) information. This feature also introduces the debug atm lfi command, which can be used to display MLP over ATM LFI debugging information.

Release	Modification
12.3(7)T	This feature was introduced.

Feature History for Troubleshooting Enhancements for Multilink PPP over ATM LFI

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Contents

•How to Troubleshoot Multilink PPP over ATM LFI

•Additional References

•Command Reference

How to Troubleshoot Multilink PPP over ATM LFI

This section contains the following procedure:

•Troubleshooting Multilink PPP over ATM LFI

Troubleshooting Multilink PPP over ATM LFI

Perform this task to display information about multilink PPP over ATM LFI connections.

Prerequisites

This task assumes that you have configured multilink PPP over ATM LFI in your network. For information about how to configure multilink PPP over ATM LFI, see the "Additional References" section.

SUMMARY STEPS

1. enable

2. show atm pvc vpi/vci

3. show ppp multilink [active | inactive | interface bundle-interface | [username name] [endpoint endpoint]]

4. show interfaces virtual-access [type number]

5. debug atm lfi

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	show atm pvc vpi/vci Example: Router# show atm pvc 15/200	Displays traffic, management, and MLP over ATM LFI information for the specified PVC.
Step 3	show ppp multilink [active | inactive | interface bundle-interface | [username name] [endpoint endpoint]] Example: Router# show ppp multilink username blue	Displays bundle information for MLP bundles.
Step 4	show interfaces virtual-access number Example: Router# show interfaces virtual-access 3	Displays status, traffic data, and configuration information about a specified virtual access interface. •Display will indicate if the interface is a member of a multilink PPP bundle.
Step 5	debug atm lfi Example: Router# debug atm lfi	Displays MLP over ATM LFI debug information.

Examples

See the show atm pvc, show ppp multilink, show interfaces virtual-access, and debug atm lfi command pages for examples of output and descriptions of the fields in the output. For information about where to find the command pages for these commands, see Command Reference.

Additional References

The following sections provide references related to multilink PPP over ATM LFI.

Related Documents

Related Topic	Document Title
LFI for multilink PPP configuration tasks	"Configuring Link Fragmentation and Interleaving for Multilink PPP" chapter in the Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
LFI for ATM virtual circuits configuration tasks	"Configuring Link Fragmentation and Interleaving for Frame Relay and ATM Virtual Circuits" chapter in the Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
Multilink PPP over ATM LFI commands	Cisco IOS Quality of Service Solutions Command Reference, Release 12.3 T
Multilink PPP configuration tasks	"PPP Configuration" section in the Cisco IOS Dial Technologies Configuration Guide, Release 12.3
Multilink PPP commands	Cisco IOS Dial Technologies Command Reference, Release 12.3 T
ATM configuration tasks	"WAN Protocols" section in the Cisco IOS Wide-Area Networking Configuration Guide, Release 12.3
ATM commands	Cisco IOS Wide-Area Networking Command Reference, Release 12.3 T

MIBs

MIBs	MIBs Link
No new or modified MIBs are supported by this feature.	To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs

Technical Assistance

Description	Link
Technical Assistance Center (TAC) home page, containing 30,000 pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.	http://www.cisco.com/public/support/tac/home.shtml

Command Reference

The following commands are introduced or modified in the feature or features documented in this module. For information about these commands, see the Cisco IOS Dial Technologies Command Reference at http://www.cisco.com/en/US/docs/ios/dial/command/reference/dia_book.html. For information about all Cisco IOS commands, go to the Command Lookup Tool at http://tools.cisco.com/Support/CLILookup or to the Cisco IOS Master Commands List.

•debug atm lfi

•show atm pvc

•show interfaces virtual-access

•show ppp multilink

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2001-2009 Cisco Systems, Inc. All rights reserved.