Cisco Unity Reconfiguration and Upgrade Guide (With Microsoft Exchange) - Upgrading and Downgrading SQL Server 2000 and MSDE 2000 [Cisco Unity]

Table Of Contents

Upgrading and Downgrading SQL Server 2000 and MSDE 2000

Upgrading from MSDE 2000 to SQL Server 2000

Downgrading from SQL Server 2000 to MSDE 2000 (Cisco Unity 3.0 and Later Only)

Upgrading and Downgrading SQL Server 2000 and MSDE 2000

This chapter contains the following sections:

•Upgrading from MSDE 2000 to SQL Server 2000

•Downgrading from SQL Server 2000 to MSDE 2000 (Cisco Unity 3.0 and Later Only)

The procedures in this chapter apply only to Cisco Unity version 3.0 through version 4.1. For Cisco Unity 4.2(1) and later, which require SQL Server 2000 Service Pack 4 or MSDE 2000 Service Pack 4, additional steps may be required.

Upgrading from MSDE 2000 to SQL Server 2000

You upgrade from MSDE 2000 to SQL Server 2000 for the following scenarios:

•You are adding ports to the Cisco Unity system, and the upgraded system will have more than 32 ports.

Caution If you upgrade the Cisco Unity server to more than 32 ports without upgrading to SQL Server 2000, Cisco Unity may not function properly.

•You are adding a pair of Cisco Unity failover servers. SQL Server 2000 must be installed on the primary and secondary servers. (MSDE 2000 is not supported on either server with Cisco Unity failover.)

If MSDE 2000 Service Pack 3 or 3a has not been installed, install it before you upgrade to SQL Server 2000, or the upgrade will fail.

Do the following three procedures in the order listed.

To Install MSDE 2000 Service Pack 3a

Step 1 On the Windows Start menu, click Run.

Step 2 Enter
<Drive>\Commserver\kill -f av*.*
to manually stop all Cisco Unity services.

Step 3 On Cisco Unity Service Packs CD 1, or from the location to which you saved the downloaded Service Packs CD 1 image files, copy the MSDE_SP3 directory to the root directory of drive C.

Step 4 Remove the disc from the CD-ROM drive, if applicable.

Step 5 On the Windows Start menu, click Run.

Step 6 Enter
C:\MSDE_SP3\MSDE\Setup.exe /upgradesp SQLRUN blanksapwd=1

Step 7 Follow the on-screen prompts to complete the installation.

Step 8 When the installation is finished, click Yes to restart the server.

Step 9 Delete the directory MSDE_SP3 to free hard-disk space.

To Upgrade from MSDE 2000 to SQL Server 2000

Step 1 Log on to Windows.

Step 2 Exit the Cisco Unity software. For details, see the "Exiting the Cisco Unity Software" section on page A-1.

Step 3 Insert the Cisco Unity Data Store 2000 disc in the CD-ROM drive.

If the CD does not run automatically, browse to the root directory, and double-click Autorun.exe.

Step 4 Click SQL Server 2000 Components.

Step 5 Click Install Database Server.

Step 6 In the Welcome dialog box, click Next.

Step 7 In the Computer Name dialog box, click Next to accept the default setting Local Computer.

Step 8 In the Installation Selection dialog box, click Upgrade, Remove, or Add Components to an Existing Instance of SQL Server, and click Next.

Step 9 Follow the on-screen prompts until the Upgrade dialog box appears.

Step 10 In the Upgrade dialog box, check the Yes, Upgrade My Programs check box, and click Next.

Step 11 In the Choose Licensing Mode dialog box, click Processor License For, and enter the number of processors in the Cisco Unity server.

Step 12 Click Continue.

Step 13 Click Yes to install additional components.

Step 14 In the Select Components dialog box, check the check boxes for the following components:

•Server Components, and all subcomponents.

•Management Tools, and all subcomponents.

•Client Connectivity.

Step 15 Click Next.

Step 16 In the Start Copying Files dialog box, click Next.

Step 17 Click Finish.

To Install SQL Server 2000 Service Pack 3

Step 1 On the Windows Start menu, click Run.

Step 2 Enter
<Drive>\Commserver\kill -f av*.*
to manually stop all Cisco Unity services.

Step 3 On Cisco Unity Service Packs CD 1, or from the location to which you saved the downloaded Service Packs CD 1 image files, browse to the SQL2000_SP3\x86\Setup directory, and double-click Setupsql.exe.

Step 4 On the Welcome screen, click Next.

Step 5 Follow the on-screen prompts until the Connect to Server dialog box appears.

Step 6 In the Connect to Server dialog box, choose Windows authentication, and click Next.

Step 7 If the SA Password Warning dialog box appears, enter and confirm the password, and click OK.

Step 8 Check the Upgrade Microsoft Search and Apply SQL Server 2000 SP3 (Required) check box, and click Continue. (Do not check the Enable Cross-Database Ownership Chaining for All Databases (Not Recommended) check box.)

Step 9 Follow the on-screen prompts.

Step 10 Click Finish to begin installing components.

Step 11 When the Setup message appears, click OK.

Step 12 Click Finish to restart the server.

Downgrading from SQL Server 2000 to MSDE 2000 (Cisco Unity 3.0 and Later Only)

Before you downgrade to MSDE 2000, back up the Cisco Unity database.

Do the following six procedures in the order listed.

To Back Up the Cisco Unity Database

Back up the UnityDB database by using SQL Server Enterprise Manager. Refer to the Microsoft documentation.

To Uninstall SQL Server 2000

Step 1 On the Windows Start menu, click Settings > Control Panel > Add/Remove Programs.

Step 2 Click Microsoft SQL Server 2000, and click Change/Remove.

Step 3 When the uninstallation is complete, restart the Cisco Unity server. For details, see the "Shutting Down or Restarting the Cisco Unity Server" section on page A-2.

To Install MSDE 2000

Step 1 Insert the Cisco Unity Data Store 2000 disc in the CD-ROM drive.

Step 2 Browse to the directory MSDE, and double-click Setup.exe.

Step 3 When the installation is complete, click Yes to restart the Cisco Unity server. Leave the Cisco Unity Data Store 2000 disc in the CD-ROM drive.

To Install Enterprise Manager

Step 1 When the Cisco Unity server restarts, log on to Windows.

Step 2 If the Cisco Unity Data Store 2000 disc does not run automatically, browse to the root directory, and double-click Autorun.exe.

Step 3 Click SQL Server 2000 Components.

Step 4 Click Install Database Server.

Step 5 In the Welcome dialog box, click Next.

Step 6 In the Computer Name dialog box, click Next to accept the default setting Local Computer.

Step 7 In the Installation Selection dialog box, click Next to accept the default setting Create a New Instance of SQL Server, or Install Client Tools.

Step 8 Follow the on-screen prompts until the CD Key dialog box appears.

Step 9 Enter the key for Cisco Unity Data Store 2000. The key is located on a sticker on the back of the CD sleeve.

Step 10 Click Next.

Step 11 In the Installation Definition dialog box, click Client Tools Only.

Step 12 Click Next.

Step 13 In the Select Components dialog box, uncheck all check boxes in the Components list except Management Tools.

Step 14 Select Management Tools (but do not uncheck the check box).

Step 15 In the Sub-Components list, uncheck all check boxes except Enterprise Manager, and click Next.

Step 16 In the Start Copying Files dialog box, click Next.

Step 17 Click Finish.

To Install the Latest MSDE 2000 Service Pack and Updates

Step 1 Refer to Recommended Service Packs and Updates for Use with Cisco Unity and the Cisco Unity Bridge at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/cmptblty/msupdate.htm to determine the latest MSDE 2000 service pack and updates recommended for use with Cisco Unity.

Step 2 Download the service pack and updates, if any, from the Microsoft website. Also download or print the installation instructions.

You can also download the service pack CD that includes the necessary service pack and updates from Cisco.com, http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml. See the release notes for your version of Cisco Unity to determine which CD the MSDE 2000 service pack and updates appear on. Release notes are available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_release_notes_list.html.

Step 3 Install the software.

Step 4 If you are prompted to restart the server to complete the installation, do so.

To Complete the Downgrade to MSDE 2000

Step 1 Restart the Cisco Unity server.

Step 2 Using SQL Server Enterprise Manager, restore the database that you backed up in the "To Back Up the Cisco Unity Database" procedure.

Step 3 Restart the Cisco Unity server. For details, see "Shutting Down or Restarting the Cisco Unity Server" section on page A-2.

	Cisco Unity Reconfiguration and Upgrade Guide (With Microsoft Exchange)
	Upgrading and Downgrading SQL Server 2000 and MSDE 2000
Cisco Unity Reconfiguration and Upgrade Guide (With Microsoft Exchange) Index Preface Upgrading Cisco Unity 4.x Software to the Shipping Version Upgrading Cisco Unity 3.x Software to the Shipping Version Upgrading a Cisco Unity 2.x System to the Shipping Version Adding Features to the Cisco Unity System Installing Optional Software Changing the Partner Exchange Server Changing the Domain Controller and Global Catalog Server (Exchange 2003 and Exchange 2000 Only) Changing the Cisco Unity Codecs Renaming a Cisco Unity Server or Moving a Cisco Unity Server to Another Domain Changing the IP Address of a Cisco Unity Server Changing Passwords Changing the Accounts That Cisco Unity Services Log On As Upgrading Exchange on the Cisco Unity System Separating Cisco Unity and Exchange Replacing or Converting a Cisco Unity Server or Failover Servers Modifying the Cisco Unity Configuration Upgrading and Downgrading SQL Server 2000 and MSDE 2000 Uninstalling Cisco Unity Appendix: Exiting and Starting the Cisco Unity Software and Server Appendix: Cisco Unity 4.x Services Appendix: Cisco Unity 3.1 Services	Download this chapter Upgrading and Downgrading SQL Server 2000 and MSDE 2000 Download the complete book PDF Version of Entire Book (PDF - 10 MB) Feedback Table Of Contents Upgrading and Downgrading SQL Server 2000 and MSDE 2000 Upgrading from MSDE 2000 to SQL Server 2000 Downgrading from SQL Server 2000 to MSDE 2000 (Cisco Unity 3.0 and Later Only) Upgrading and Downgrading SQL Server 2000 and MSDE 2000 This chapter contains the following sections: •Upgrading from MSDE 2000 to SQL Server 2000 •Downgrading from SQL Server 2000 to MSDE 2000 (Cisco Unity 3.0 and Later Only) The procedures in this chapter apply only to Cisco Unity version 3.0 through version 4.1. For Cisco Unity 4.2(1) and later, which require SQL Server 2000 Service Pack 4 or MSDE 2000 Service Pack 4, additional steps may be required. Upgrading from MSDE 2000 to SQL Server 2000 You upgrade from MSDE 2000 to SQL Server 2000 for the following scenarios: •You are adding ports to the Cisco Unity system, and the upgraded system will have more than 32 ports. Caution If you upgrade the Cisco Unity server to more than 32 ports without upgrading to SQL Server 2000, Cisco Unity may not function properly. •You are adding a pair of Cisco Unity failover servers. SQL Server 2000 must be installed on the primary and secondary servers. (MSDE 2000 is not supported on either server with Cisco Unity failover.) If MSDE 2000 Service Pack 3 or 3a has not been installed, install it before you upgrade to SQL Server 2000, or the upgrade will fail. Do the following three procedures in the order listed. To Install MSDE 2000 Service Pack 3a Step 1 On the Windows Start menu, click Run. Step 2 Enter <Drive>\Commserver\kill -f av. to manually stop all Cisco Unity services. Step 3 On Cisco Unity Service Packs CD 1, or from the location to which you saved the downloaded Service Packs CD 1 image files, copy the MSDE_SP3 directory to the root directory of drive C. Step 4 Remove the disc from the CD-ROM drive, if applicable. Step 5 On the Windows Start menu, click Run. Step 6 Enter C:\MSDE_SP3\MSDE\Setup.exe /upgradesp SQLRUN blanksapwd=1 Step 7 Follow the on-screen prompts to complete the installation. Step 8 When the installation is finished, click Yes to restart the server. Step 9 Delete the directory MSDE_SP3 to free hard-disk space. To Upgrade from MSDE 2000 to SQL Server 2000 Step 1 Log on to Windows. Step 2 Exit the Cisco Unity software. For details, see the "Exiting the Cisco Unity Software" section on page A-1. Step 3 Insert the Cisco Unity Data Store 2000 disc in the CD-ROM drive. If the CD does not run automatically, browse to the root directory, and double-click Autorun.exe. Step 4 Click SQL Server 2000 Components. Step 5 Click Install Database Server. Step 6 In the Welcome dialog box, click Next. Step 7 In the Computer Name dialog box, click Next to accept the default setting Local Computer. Step 8 In the Installation Selection dialog box, click Upgrade, Remove, or Add Components to an Existing Instance of SQL Server, and click Next. Step 9 Follow the on-screen prompts until the Upgrade dialog box appears. Step 10 In the Upgrade dialog box, check the Yes, Upgrade My Programs check box, and click Next. Step 11 In the Choose Licensing Mode dialog box, click Processor License For, and enter the number of processors in the Cisco Unity server. Step 12 Click Continue. Step 13 Click Yes to install additional components. Step 14 In the Select Components dialog box, check the check boxes for the following components: •Server Components, and all subcomponents. •Management Tools, and all subcomponents. •Client Connectivity. Step 15 Click Next. Step 16 In the Start Copying Files dialog box, click Next. Step 17 Click Finish. To Install SQL Server 2000 Service Pack 3 Step 1 On the Windows Start menu, click Run. Step 2 Enter <Drive>\Commserver\kill -f av. to manually stop all Cisco Unity services. Step 3 On Cisco Unity Service Packs CD 1, or from the location to which you saved the downloaded Service Packs CD 1 image files, browse to the SQL2000_SP3\x86\Setup directory, and double-click Setupsql.exe. Step 4 On the Welcome screen, click Next. Step 5 Follow the on-screen prompts until the Connect to Server dialog box appears. Step 6 In the Connect to Server dialog box, choose Windows authentication, and click Next. Step 7 If the SA Password Warning dialog box appears, enter and confirm the password, and click OK. Step 8 Check the Upgrade Microsoft Search and Apply SQL Server 2000 SP3 (Required) check box, and click Continue. (Do not check the Enable Cross-Database Ownership Chaining for All Databases (Not Recommended) check box.) Step 9 Follow the on-screen prompts. Step 10 Click Finish to begin installing components. Step 11 When the Setup message appears, click OK. Step 12 Click Finish to restart the server. Downgrading from SQL Server 2000 to MSDE 2000 (Cisco Unity 3.0 and Later Only) Before you downgrade to MSDE 2000, back up the Cisco Unity database. Do the following six procedures in the order listed. To Back Up the Cisco Unity Database Back up the UnityDB database by using SQL Server Enterprise Manager. Refer to the Microsoft documentation. To Uninstall SQL Server 2000 Step 1 On the Windows Start menu, click Settings > Control Panel > Add/Remove Programs. Step 2 Click Microsoft SQL Server 2000, and click Change/Remove. Step 3 When the uninstallation is complete, restart the Cisco Unity server. For details, see the "Shutting Down or Restarting the Cisco Unity Server" section on page A-2. To Install MSDE 2000 Step 1 Insert the Cisco Unity Data Store 2000 disc in the CD-ROM drive. Step 2 Browse to the directory MSDE, and double-click Setup.exe. Step 3 When the installation is complete, click Yes to restart the Cisco Unity server. Leave the Cisco Unity Data Store 2000 disc in the CD-ROM drive. To Install Enterprise Manager Step 1 When the Cisco Unity server restarts, log on to Windows. Step 2 If the Cisco Unity Data Store 2000 disc does not run automatically, browse to the root directory, and double-click Autorun.exe. Step 3 Click SQL Server 2000 Components. Step 4 Click Install Database Server. Step 5 In the Welcome dialog box, click Next. Step 6 In the Computer Name dialog box, click Next to accept the default setting Local Computer. Step 7 In the Installation Selection dialog box, click Next to accept the default setting Create a New Instance of SQL Server, or Install Client Tools. Step 8 Follow the on-screen prompts until the CD Key dialog box appears. Step 9 Enter the key for Cisco Unity Data Store 2000. The key is located on a sticker on the back of the CD sleeve. Step 10 Click Next. Step 11 In the Installation Definition dialog box, click Client Tools Only. Step 12 Click Next. Step 13 In the Select Components dialog box, uncheck all check boxes in the Components list except Management Tools. Step 14 Select Management Tools (but do not uncheck the check box). Step 15 In the Sub-Components list, uncheck all check boxes except Enterprise Manager, and click Next. Step 16 In the Start Copying Files dialog box, click Next. Step 17 Click Finish. To Install the Latest MSDE 2000 Service Pack and Updates Step 1 Refer to Recommended Service Packs and Updates for Use with Cisco Unity and the Cisco Unity Bridge at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/cmptblty/msupdate.htm to determine the latest MSDE 2000 service pack and updates recommended for use with Cisco Unity. Step 2 Download the service pack and updates, if any, from the Microsoft website. Also download or print the installation instructions. You can also download the service pack CD that includes the necessary service pack and updates from Cisco.com, http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml. See the release notes for your version of Cisco Unity to determine which CD the MSDE 2000 service pack and updates appear on. Release notes are available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_release_notes_list.html. Step 3 Install the software. Step 4 If you are prompted to restart the server to complete the installation, do so. To Complete the Downgrade to MSDE 2000 Step 1 Restart the Cisco Unity server. Step 2 Using SQL Server Enterprise Manager, restore the database that you backed up in the "To Back Up the Cisco Unity Database" procedure. Step 3 Restart the Cisco Unity server. For details, see "Shutting Down or Restarting the Cisco Unity Server" section on page A-2.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks