The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
The Cisco 4.9-6 GHz Omni Mobile WiFi Antenna (IW-ANT-OMM-53-N) delivers enhanced connectivity for Autonomous Guided Vehicles (AGVs), Autonomous Mobile Robots (AMR) and unmanned systems even in NLOS and highly obstructed environments. With a multi-polarized three-dimensional element design, it provides maximum reliability and signal stability.
The following table shows the antenna specifications:
|
Frequency Range |
4.9-6.0 GHz |
|
Gain |
3 dBI |
|
VSWR |
<1.6:1 |
|
Horizontal Pattern Type |
Omni Directional |
|
Vertical Pattern Type |
Full |
|
Ground Plane |
Built In |
|
Environmental Type |
Outdoor |
|
Operational Temperature |
-40 to 85 deg C |
|
Storage/Transport Temperature |
-40 to 85 deg C |
|
IP Rating |
IP67 |
|
RoHS |
REACH Compliant |
|
Color |
Black |
|
Antenna Feeds |
One |
|
Connector Type |
N-Female 1.5 |
|
Polarization |
Multi-Polarized |
|
Power |
50 Watts Input |
|
Impedance |
50 ohms Nominal |
|
Construction |
UV Stabilized ASA |
|
Length |
1.0 inch |
|
Width |
1.0 inch |
|
Height |
2.7 inch |
|
Weight |
2.0 oz. |
|
Mounting Type |
Surface |
|
Hardware Included |
Nut and Washer |
Mounting hardware and O-Ring are included in the antenna package.
The following figures show the antenna radiation patterns.
Feedback