Security Intelligence

The following topics provide an overview of Security Intelligence, including use of lists for blocking and allowing traffic and basic configuration.

About Security Intelligence

As an early line of defense against malicious internet content, Security Intelligence uses reputation intelligence to quickly block connections to or from IP addresses, URLs, and domain names. This is called Security Intelligence block listing.

Security Intelligence is an early phase of access control, before the system performs more resource-intensive evaluation. Using a Block list improves performance by quickly excluding traffic that does not require inspection.


Note
You cannot use a Block list to block fastpathed traffic. Prefilter evaluation occurs before Security Intelligence filtering. Fastpathed traffic bypasses all further evaluation, including Security Intelligence.

Although you can configure custom Block lists, Cisco provides access to regularly updated intelligence feeds. Sites representing security threats such as malware, spam, botnets, and phishing appear and disappear faster than you can update and deploy custom configurations.

You can refine Security Intelligence Block listing with Do Not Block lists and monitor-only Block lists. These mechanisms exempt traffic from being blocked by a Block list, but do not automatically trust or fastpath matching traffic. Traffic added to a Do Not Block list or monitored at the Security Intelligence stage is intentionally subject to further analysis with the rest of access control.

Best Practices for Security Intelligence

  • Configure your access control policies to block threats detected by Cisco-provided Security Intelligence feeds. See Configuration Example: Security Intelligence Blocking.

  • If you want to supplement the Cisco-provided Security Intelligence feeds with custom threat data, or manually block emerging threats:

  • To test new feeds, or for passive deployments, set the action from block to monitor only. See Security Intelligence Monitoring.

  • If you need to exclude specific sites or addresses from Security Intelligence blocking, see Override Security Intelligence Blocking.

  • If your Firepower deployment is integrated with SecureX or the related tool Cisco Threat Response (formerly known as Cisco Threat Response or CTR), and you use custom Security Intelligence lists and feeds, be sure to update security services exchange with these lists and feeds. For details, see instructions for configuring auto-promotion of events in the security services exchange online help. For general information about this integration, see Integrate with Cisco SecureX in the Firepower Management Center Administration Guide.

  • System-provided Security Intelligence categories may change over time and without notification; you should plan to check periodically for changes, and modify your policies accordingly.

  • You should also configure URL filtering, a separate feature with separate licensing requirements, for further protection against malicious sites. See URL Filtering.

License Requirements for Security Intelligence

FTD License

Threat

Classic License

Protection

Requirements and Prerequisites for Security Intelligence

Model Support

Any

Supported Domains

Any

User Roles

  • Admin

  • Access Admin

  • Network Admin


Important

You must apply the Network Discovery policy on the device for a successful application of the SI policy.

Security Intelligence Sources

  • System-provided feeds

    Cisco provides access to regularly updated intelligence feeds for domains, URLs and IP addresses. For more information, see Security Intelligence.

    If you see a feed with "TID" in the name, this feed is not used by Security Intelligence. Instead, this feed is used by the feature described in Threat Intelligence Director.

  • Third-party feeds

    Optionally, supplement Cisco-provided feeds with third-party reputation feeds, which are dynamic lists that the Firepower Management Center downloads from the internet on a regular basis. See Custom Security Intelligence Feeds.

  • Custom Block lists or feeds (or objects or groups)

    Block specific IP addresses, URLs, or domain names using a manually-created list or feed (for IP addresses, you can also use network objects or groups.)

    For example, if you become aware of malicious sites or addresses that are not yet blocked by a feed, add these sites to a custom Security Intelligence list and add this custom list to the Block list in the Security Intelligence tab of your access control policy, as described in Custom Security Intelligence Lists and Configure Security Intelligence.

    For IP addresses, you can optionally use network objects rather than lists or feeds for this purpose; for information, see Network. (For URLs, using lists and feeds is strongly recommended over other methods.)

  • Custom Do Not Block lists or feeds

    Override Security Intelligence blocking for specific sites or addresses. See Override Security Intelligence Blocking.

  • Global Block lists (one each for Network, URL and DNS)

    While reviewing events, you can immediately add an event's IP address, URL, or domain to the applicable Global Block List so that Security Intelligence will handle future traffic from that source. See Global and Domain Security Intelligence Lists.

  • Global Do Not Block lists (one each for Network, URL and DNS)

    While reviewing events, you can immediately add an event's IP address, URL, or domain to the applicable Global Do Not Block List if you do not want Security Intelligence to block future traffic from that source. See Global and Domain Security Intelligence Lists.

Configure Security Intelligence

Each access control policy has Security Intelligence options. You can add network objects, URL objects and lists, and Security Intelligence feeds and lists to a Block list or Do Not Block list, and constrain any of these by security zone. You can also associate a DNS policy with your access control policy, and add domain names to a Block or Do Not Block list.

The number of objects in the Do Not Block lists plus the number in the Block lists cannot exceed 125 network objects, or 32767 URL objects and lists.


Note
The system builds a separate network map for each leaf domain. In a multidomain deployment, using literal IP addresses to constrain this configuration can have unexpected results. Using override-enabled objects allows descendant domain administrators to tailor Global configurations to their local environments.

Before you begin

  • Tip: For guidance on minimum configuration recommendations, see also Configuration Example: Security Intelligence Blocking.

  • To ensure that all options are available to select, add at least one managed device to your management center.

  • In passive deployments, or if you want to set Security Intelligence filtering to monitor-only, enable logging; see Logging Connections with Security Intelligence in the Firepower Management Center Administration Guide .

  • Configure a DNS policy to take Security Intelligence action for domains. For more information, see DNS Policies.

Procedure

Step 1

In the access control policy editor, click Security Intelligence.

If the controls are dimmed, settings are inherited from an ancestor policy, or you do not have permission to modify the configuration. If the configuration is unlocked, uncheck Inherit from base policy to enable editing.

Step 2

You have the following options:

  • Click Networks to add network objects (IP addresses).

    Note

     

    Network objects used in a Security Intelligence policy require a Threat license.

  • Click URLs to add URL objects.

Step 3

Find the Available Objects you want to add to the Block or Do Not Block list. You have the following options:

Security Intelligence ignores IP address blocks using a /0 netmask.

Step 4

Choose one or more Available Objects to add.

Step 5

(Optional) Choose an Available Zone to constrain the selected objects by zone.

You cannot constrain system-provided Security Intelligence lists by zone.

Note

 

The Any zone for an SI list applies only to interfaces that are part of a security zone. However, an exception is that if a device does not have any interfaces associated with a security zone, then the Any zone will match any interface.

For example, if you have five interfaces on a device and none of them are associated with a security zone, any SI list that is assigned to the Any zone will be inspected against traffic on ALL interfaces on the device. If you add one interface to a security zone on that device, it effectively would remove SI inspection on the other four interfaces, where the zone is set to Any for an SI list. If you add the other four interfaces to a security zone, they will be evaluated by the SI list attached to the Any zone.

Step 6

Click Add to Do Not Block list or Add to Block list, or click and drag the selected objects to either list.

To remove an object from a Block or Do Not Block list, click Delete (delete icon) To remove multiple objects, choose the objects and right-click to Delete Selected.

Step 7

(Optional) Set objects on the Block list to monitor-only by right-clicking the object under Block List, then choosing Monitor-only (do not block).

You cannot set system-provided global Security Intelligence lists to monitor only.

Step 8

Choose a DNS policy from the DNS Policy drop-down list.

Step 9

Click Save.

What to do next

Security Intelligence Options

Use the Security Intelligence tab in the access control policy editor to configure network (IP address) and URL Security Intelligence, and to associate the access control policy with a DNS policy in which you have configured Security Intelligence for domains.

Available Objects

Available objects include:

  • Security Intelligence categories populated by the system-provided feed.

    For details, see Security Intelligence Categories.

  • System-provided Global Block and Do Not Block lists.

    For descriptions, see Security Intelligence Sources.

  • Security Intelligence lists and feeds that you create under Object > Object Management > Security Intelligence.

    For descriptions, see Security Intelligence Sources.

  • Network and URL objects and groups that are configured on the respective pages under Object > Object Management. These are different from the Security Intelligence objects in the previous bullet.

    For details about network objects, see Network. (For URLs, use Security Intelligence lists or feeds rather than objects or groups.)

Available Zones

Except for the system-provided Global lists, you can constrain Security Intelligence filtering by zone.

For example: To improve performance, you may want to target enforcement. As a more specific example, you can block spam only for a security zone that handles email traffic.

To enforce Security Intelligence filtering for an object on multiple zones, you must add the object to the Block or Do Not Block list separately for each zone.

DNS Policy

In order to match DNS traffic using Security Intelligence, you must select a DNS policy for your Security Intelligence configuration.

Using Block or Do Not Block lists, or monitoring traffic based on a DNS list or feed, also requires that you:

Do Not Block List

See Override Security Intelligence Blocking.

To select all objects in the list, right-click an object.

Block List

See Configuration Example: Security Intelligence Blocking and other topics in this chapter.

For explanations of the visual indicators in the Block list, see Block List Icons.

To select all objects in the list, right-click an object.

Logging

Security Intelligence logging, enabled by default, logs all blocked and monitored connections handled by an access control policy’s target devices. However, the system does not log Do Not Block list matches; logging of connections on the Do Not Block list depends on their eventual disposition. Logging must be enabled for connections on the Block list before you can set objects on that list to monitor-only.

To enable, disable, or view logging settings, right-click an object in the Block list.

Security Intelligence Categories

Security Intelligence categories are determined by the system-provided feeds described in Security Intelligence.

These categories are used in the following locations:

  • The Networks sub-tab on the Security Intelligence tab of an access control policy

  • The URLs sub-tab beside the Networks tab on the Security Intelligence tab of an access control policy

  • In a DNS policy on the DNS tab in the DNS rule configuration page

  • In events generated when traffic matches Block or Monitor configurations in the above locations


Note

If your organization is using Threat Intelligence Director: When viewing events, you may see categories that indicate that the action was taken by TID, such as TID URL Block.

Categories are updated by Talos from the cloud, and this list may change independently of Firepower releases.

Table 1. Cisco Talos Intelligence Group (Talos) Feed Categories
Security Intelligence Category Description

Attackers

Active scanners and hosts known for outbound malicious activity

Banking_fraud

Sites that engage in fraudulent activities that relate to electronic banking

Bogon

Bogon networks and unallocated IP addresses

Bots

Sites that host binary malware droppers

CnC

Sites that host command-and-control servers for botnets

Cryptomining

Hosts providing remote access to pools and wallets for the purpose of mining cryptocurrency

Dga

Malware algorithms used to generate a large number of domain names acting as rendezvous points with their command-and-control servers

Exploitkit

Software kits designed to identify software vulnerabilities in clients

High_risk

Domains and hostnames that match against the OpenDNS predictive security algorithms from security graph

Ioc

Hosts that have been observed to engage in Indicators of Compromise (IOC)

Link_sharing

Websites that share copyrighted files without permission

Malicious

Sites exhibiting malicious behavior that do not necessarily fit into another, more granular, threat category

Malware

Sites that host malware binaries or exploit kits

Newly_seen

Domains that have recently been registered, or not yet seen via telemetry.

Attention

 

Currently, this category does not have any active feed and is reserved for future use.

Open_proxy

Open proxies that allow anonymous web browsing

Open_relay

Open mail relays that are known to be used for spam

Phishing

Sites that host phishing pages

Response

IP addresses and URLs that are actively participating in malicious or suspicious activity

Spam

Mail hosts that are known for sending spam

Spyware

Sites that are known to contain, serve, or support spyware and adware activities

Suspicious

Files that appear to be suspicious and have characteristics that resemble known malware

Tor_exit_node

Hosts known to offer exit node services for the Tor Anonymizer network

Block List Icons

The following visual indicators may appear in the Block list on the Security Intelligence tab in an access control policy:

Icon or Visual Indicator

Description

Block (block icon)

The object is set to block.

Monitor (monitor icon)

The object is set to monitor-only.

See Security Intelligence Monitoring

An object is displayed in strikethrough text

The same object is also on the Do Not Block list, which overrides the block.

Configuration Example: Security Intelligence Blocking

Configure your access control policy to block all threats detectable by the system's regularly updated Security Intelligence feeds.

The number of objects in the Block lists plus the number in the Do Not Block lists cannot exceed 125 network objects, or 32767 URL objects and lists.


Note
The system builds a separate network map for each leaf domain. In a multidomain deployment, using literal IP addresses to constrain this configuration can have unexpected results. Using override-enabled objects allows descendant domain administrators to tailor Global configurations to their local environments.

Before you begin

  • To ensure that all options are available to select, add at least one managed device to your management center.

  • Configure a DNS policy to block all Security Intelligence threat categories for domains. For more information, see DNS Policies.

  • If you have, or will have, custom lists of entities to block, create a Security Intelligence object of each type (URLs, DNS, Networks.) See Security Intelligence.

Procedure

Step 1

Click Policies > Access Control.

Step 2

Create a new access control policy or edit an existing policy.

Step 3

In the access control policy editor, click Security Intelligence.

If the controls are dimmed, settings are inherited from an ancestor policy, or you do not have permission to modify the configuration. If the configuration is unlocked, uncheck Inherit from base policy to enable editing.

Step 4

Click Networks to add blocking criteria for IP addresses.

  1. Scroll down in the Networks list and select all of the threat categories listed below the Global lists.

  2. If applicable, select the security zones for which you want to block these threats.

  3. Click Add to Block List.

  4. If you have created custom lists or feeds with addresses to block, add those to the Block List using the same steps as above.

Step 5

Click URLs to add blocking criteria for URLs, and repeat the steps you followed for Networks.

Step 6

Choose a DNS policy from the DNS Policy drop-down list; see DNS Policy Overview.

Step 7

Click Save.

What to do next

Security Intelligence Monitoring

Monitoring logs connection events for traffic that would have been blocked by Security Intelligence, but does not block the traffic. Monitoring is especially useful for:

  • Testing feeds before you implement them.

    Consider a scenario where you want to test a third-party feed before you implement blocking using that feed. When you set the feed to monitor-only, the system allows connections that would have been blocked to be further analyzed by the system, but also logs a record of each of those connections for your evaluation.

  • Passive deployments, to optimize performance.

    Managed devices that are deployed passively cannot affect traffic flow; there is no advantage to configuring the system to block traffic. Additionally, because blocked connections are not actually blocked in passive deployments, the system may report multiple beginning-of-connection events for each blocked connection.


Note

If configured, Threat Intelligence Director may impact the action taken (Monitor or Block.) For more information, see TID-FMC Action Prioritization.

To Configure Security Intelligence Monitoring:

After you configure Security Intelligence blocking following the instructions in Configuration Example: Security Intelligence Blocking, right-click each applicable object in the Block list and choose Monitor-only. You cannot set system-provided Security Intelligence lists to monitor only.

Override Security Intelligence Blocking

Optionally, you can use Do Not Block lists to exempt specific domains, URLs, or IP addresses from being blocked by Security Intelligence lists or feeds.

For example, you can:

  • Override the occasional false-positive block in a reputable Security Intelligence feed

  • Inspect specific traffic in depth instead of blocking it early based on reputation

  • Exempt otherwise-restricted transactions based on zone from Security Intelligence blocking

    For example, you can add an improperly classified URL to a Do Not Block list, but then restrict the Do Not Block list object using a security zone used by those in your organization who need to access those URLs. That way, only those with a business need can access the URLs on the Do Not Block list.


Note

Entries on a Do Not Block list are simply exemptions from the block list. Any connection that passes the Security Intelligence policy is subject to the access control rules. Thus, an entry in the Do Not Block list can subsequently be blocked by an access control rule or intrusion policy. Your Do Not Block entries should always be exemptions from your block lists.

Procedure

Step 1

Option 1: Add an IP address, URL, or domain from an event to the Global Do Not Block List. See Global and Domain Security Intelligence Lists.

Step 2

Option 2: Use a custom Security Intelligence list or feed.

  1. Create the custom Security Intelligence list or feed. See Custom Security Intelligence Lists or Creating Security Intelligence Feeds.

  2. For IP addresses (Networks) and URLs: Edit your access control policy, click the Security Intelligence tab, then click the custom list or feed in the Networks or URLs sub-tab, then click Add to Do Not Block List.

  3. Save your changes.

  4. For domains (DNS): See the "DNS Policy" section in the Security Intelligence Options topic.

  5. Deploy your changes.

Troubleshooting Security Intelligence

See the following topics for troubleshooting Security Intelligence.

Security Intelligence Categories Are Missing from the Available Options List

Symptoms: On the Security Intelligence tab of the access control policy, Security Intelligence categories (such as CnC or Exploitkit) are not displayed in the Networks tab under Available Options.

Cause:

  • These categories do not appear until you have added at least one managed device to your management center. You must add a device in order to pull all TALOS feeds.

  • The URL filtering feature uses a different set of categories than the Security Intelligence feature; the category that you expect to see may be a URL filtering category. To see URL filtering categories, look at the URLs tab in an access control rule.

History for Security Intelligence Block Listing

Feature

Minimum FMC

Minimum FTD

Details

New Security Intelligence categories

All

Any

Talos has added the following new Security Intelligence categories:

  • banking_fraud

  • ioc

  • high_risk

  • link_sharing

  • malicious

  • newly_seen

  • spyware

You should update your access control and DNS policies to address the new categories, and check periodically for future changes.

New/modified pages: Security Intelligence tab, Networks and URLs sub-tabs; DNS rules in DNS policies

Supported platforms: FMC