|
|
|
WARNING |
Emergency call from <CALLING ADDRESS> has been routed to default ERL because calling party modification failed. Please make sure that the checkbox "Enable Calling Party Number Modification" is checked on the Call Manager user page for the CER user.PSAP callbacks MAY NOT work correctly.The CER service must be restarted once the flag is checked on the Call Manager User page. |
WARNING |
Emergency call from <calling address> could not be routed using the following Routepatterns. <LIST OF RP's> Call Routed to <RP/NUMBER> Please check the availability of the above routes. Also, you must check for the following error conditions: 1. If FAC or CMC are configured on the route patterns used for CER, please disable them. 2. If the "Calling Party Number Modification" flag on the CER user page in the call manager is not enabled, please enable it. |
ERROR |
Failed to load class <CLASS NAME>. |
ERROR |
CCMString is empty can't load telephony classes. |
WARNING |
Got OutOfService event from provider: <PROVIDER_NAME>. |
INFO |
Got InService event from provider: <PROVIDER_NAME>. |
WARNING |
Logged out of the duplicate provider - <CTI_Manager> from CER.Specify the CTI Ports (if any) of this provider, in a different CCM node. |
ERROR |
Cannot register media terminal for port: <PORT_NUMBER>. |
WARNING |
CTI Port: <PORT_NUMBER> is in OUTOFSERVICE, trying after 10 seconds. |
ERROR |
Mediachannel creation failed: <ERROR>. |
WARNING |
Failed to create media channel for: <PORT_NUMBER>. |
ERROR |
Failed to initiate call to security: <NUMBER> <ERROR>. <ERROR> corresponds to: • PrivilegeViolationException • InvalidPartyException • MethodNotSupportedException • InvalidArgumentException • InvalidStateException • E911CallRouterException • <Other Exceptions (if any)> |
ERROR |
Failed to register route point: <ROUTE_PATTERN> with Provider: <PROVIDER_NAME>. |
ERROR |
RouteAddress: <ADDRESS> is in OUTOFSERVICE. |
WARNING |
<ADDRESS> Route Point received IN_SERVICE event from Provider <NAME>. |
WARNING |
<ADDRESS> Route Point received OUT_OF_SERVICE event from Provider <NAME>. |
ERROR |
PSAP Callback failed for: <NUMBER> "Address = "+callingAddress+" ; Terminal = "+callingTerminal; because, routeEndEvent returned: < EXCEPTION> Exception can be: • CAUSE_INVALID_DESTINATION • CAUSE_ROUTING_TIMER_EXPIRED • CAUSE_PARAMETER_NOT_SUPPORTED • CAUSE_STATE_INCOMPATIBLE • CAUSE_UNSPECIFIED_ERROR ERROR_RESOURCE_BUSY.Please check availability of the Routes CAUSE_CTIERR_FAC_CMC_REASON_FAC_NEEDED.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_CMC_NEEDED.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_FAC_CMC_NEEDED.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_FAC_INVALID.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_CMC_INVALID.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. |
ERROR |
Call failed to reach PSAP for: <NUMBER> "Address = "+callingAddress+" ; Terminal = "+callingTerminal; because, routeEndEvent returned: <EXCEPTION> Exception can be: • CAUSE_INVALID_DESTINATION • CAUSE_ROUTING_TIMER_EXPIRED • CAUSE_PARAMETER_NOT_SUPPORTED • CAUSE_STATE_INCOMPATIBLE • CAUSE_UNSPECIFIED_ERROR ERROR_RESOURCE_BUSY.Please check availability of the Routes CAUSE_CTIERR_FAC_CMC_REASON_FAC_NEEDED.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_CMC_NEEDED.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_FAC_CMC_NEEDED.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER.CAUSE_CTIERR_FAC_CMC_REASON_FAC_INVALID.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. CAUSE_CTIERR_FAC_CMC_REASON_CMC_INVALID.Please Uncheck the Requirement of FAC/CMC codes on the Route points used by the Cisco ER. |
WARNING |
Call from <CALLER_ID> could not be routed to the Intrado ERL.Possible reasons: The TN Update to Intrado for the Intrado ERL may not yet happened or has met with errors. |
WARNING |
Call from <CALLER ID> could not be routed to the Offpremies ERL.Possible reasons: The phone-location association has not yet happened or has met with errors. |
WARNING |
Failed to get the JTAPI Provider for: <NAME_STRING> trying infinitely. |
WARNING |
Not registering the provider: <PROVIDER_NAME> as is already registered/in the same CCM Cluster as that of:<element>. |
WARNING |
JTAPI logs are not enabled as the logs path is empty in E911Bootstrap properties. |
ERROR |
Failed to get the JTAPI Provider for: <IP Address/Host Name> after <NUMBER> attempts. |
WARNING |
Currently, no CTI Ports are available to place the call for <CallingAddress>.Phone notification is retried in the next 60 seconds. |
フィードバック